The Fluke 116 HVAC multimeter with temperature and microamp measurement delivers the capabilities professionals demand to troubleshoot and repair heating, ventilation and air conditioning (HVAC) systems. Its microamp measurements help you to quickly troubleshoot problems with flame sensors down to 0.1 microamps. The Fluke 116 comes with the 80BK-A integrated DMM temperature probe for temperatures from -40 to +400°C. The AutoV/LoZ function prevents false readings caused by ghost voltages. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations. Fluke 116 multimeters are independently tested for safe use in CAT III 600V environments.

• Fluke 116 dimensions 167 x 84 x 46mm
• Weighs 550g
• Fluke 323 dimensions 207 x 75 x 34mm
• Weighs 265g

The Fluke 116/62 MAX+ Digital Multimeter Kit is the complete solution to HVAC troubleshooting. This extra value packed HVAC Technician's Combo Kit, provides all the accessories an HVAC professional would need, in a compact carry case.

What's in the Box?Fluke116 Digital MultimeterTL175 Hard Point Test Lead SetTPak ToolPak Magnetic Meter Hanging StrapFlexible Cuff Pipe Clamp Thermocouple80BK Integrated Temperature Probe80AK-A Thermocouple AdapterC115 Deluxe Soft Carrying Case with Shoulder Strap

PLUS

Fluke 62 MAX+Dust and water-resistant: IP54 ratedRugged: 3m drop testedErgonomically designed: Completely redesigned for a more natural hand fitDistance to spot: 12:1Dual lasers: Identifies area to be measuredLarge, backlit display: Makes data easier to read, even in dark areas

Fluke 116 HVAC Multimeter

• Built in thermometer for HVAC applications
• Microamps to test flame sensors
• LoZ: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak)
• CAT III 600V safety rated

Fluke 62 MAX+

• Wide temperature range from -30° to 650°C
• 12:1 distance-to-spot ratio
• ±1% Accuracy of the reading
• Dual lasers to accurately identify spot size
• Rugged performance
• Survives 3m drops to wood floors
• Water and dust resistance
• IP54 rated to withstand rain, splashing liquids, dust and dirt
• Small and easy to use
• Ergonomic fit to 'feel' good in your hand
• Multi-angle
• Backlit display
• Manufacturer's part: Fluke 116 and 62 MAX+

This combo kit pairs the new Fluke 117 DMM with a Fluke 322 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation.

Let's look at the Fluke 117 Multimeter:Designed by electricians. Engineered by Fluke. The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 helps you to get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides min/max/average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job. (For specifications, see datasheet and technical specifications).

Now for the Fluke 322 Clamp Meter:The Fluke 322 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400A in tight cable compartments. The model also offers DC voltage measurements and has a higher resolution for loads below 40A. (For specifications, see datasheet and technical specifications).

What's in the box:Fluke 117 True-RMS digital multimeter with non-contact voltage detection, Fluke 322 Compact clamp meter, TPAK Magnetic Meter Hanging Strap, TL75 Hard Point test lead set and C115 Deluxe soft carrying case with shoulder strap.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True-rms for accurate measurements on non-linear loads
• Measures 10A (20A overload for 30 seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak) for hands free operation
• CAT III 600V safety rated

Features of the Fluke 322 Clamp Meter:

• New smaller size fits easily into tight places
• Precise measurements with 1.8% basic accuracy
• Resolution up to 0.01A and 0.1V
• Measures AC current to 400A
• Measures AC volts to 600V
• Measures DC volts to 600V (Fluke 322 only)
• Resistance measurement to 400Ω
• Continuity for quick checking of shorts
• Automatic low battery indicator
• Display hold function
• Two year warranty

The 62MAX+ IR thermometer measures temperatures between -30 and 650°C. It features two laser spots for accurate aiming, is very compact and operates from a single AA battery. It is also available seperately (55-6683). The 1AC VoltAlert™ AC voltage tester from Fluke is simple to use, just touch the tip to a terminal strip, socket or cable. The tip glows red to indicate there's AC voltage present. The Fluke 323 true-RMS clamp meter will measure up to 400A AC and up to 600V AC/DC with non-linear signals. It also measures resistance up to 40kΩ with continuity detection.

• 62MAX+ dimensions 175 x 85 x 75mm, 255g
• 323 meter dimensions 207 x 75 x 34mm, 265g
• Max. conductor diameter 30mm
• CAT IV 300V/CAT III 600 V safety rating

This new Fluke 87V/i410 combo kit combines the Fluke 87V industrial multimeter with the i410 AC/DC current clip and the new padded C115 carrying bag. The Fluke 87V series offers improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. Use its low pass filter function to measure voltage and frequency accurately on electrically noisy equipment like adjustable speed motor drives. Use the peak capture function to detect intermittent problems and transients as fast as 250µs. Included in the kit is Fluke 87V multimeter, a C35 soft carrying case, TL224 test leads, TP238 slim reach probes, AC220 aligator clips, holster, 80BK temperature sensor and a user manual.

• True-RMS voltage and current for accurate measurements on non-linear signals
• Min., max., average recording to capture variations automatically
• Audible continuity, diode test and duty cycle

The Fluke T5-600 electrical tester lets you check voltage, continuity and current with one compact tool. It features the innovative OpenJaw™ measuing slot that you simply place over the conductor to measure current up to 100A without breaking the circuit. The tough test leads store neatly behind the tester, making it easy to carry the T5 in your tool bag. Note that the T5-600 does not measure DC current. The 62MAX+ IR thermometer measure temperatures between -30 and 650°C. It features two laser spots for accurate aiming, is very compact and operates from a single AA battery. It is also available seperately (55-6683). The 1AC VoltAlert™ AC voltage tester from Fluke is simple to use, just touch the tip to a terminal strip, outlet, or cord. The tip glows red to indicate there's AC voltage present.

• T5-600 jaw opening 12.9mm (0.5in)
• dimensions 30.5 mm x 51 mm x 203 mm, 300g
• 62MAX+ dimensions 175 x 85 x 75mm, 255g

The most comprehensive solution for safe isolation, the Martindale VIPDLOKPRO138 lock out kit contains the VI13800 voltage indicator, matching PD440 proving device and LOKKITPRO which contains the full range of Martindale locking off devices, all supplied in two convenient soft carry cases. The kit simplifies compliance with Health & Safety recommendations for safe working practices when maintaining or installing electrical plant and equipment.

The LOKKITPRO is the ultimate lock out kit enabling safe isolation procedures to be carried out in all types of facility. The kit is ideal for contractors and maintenance teams working on industrial and commercial sites as it includes the full range of Martindale locking off devices, compatible with all distribution boards and red spot type fuse holders. It includes the latest LOK7 slimline MCB lock for use on breakers where the position of the test button may prevent the use of conventional lock outs or access is restricted, plus a 1m cable lock device suitable for both electrical and mechanical locking out and a steel hasp for use with multiple padlocks for when more than one operator is working on the same installation. Multi-lock hasps ensure a circuit cannot be re-energised until each operator has finished work and removed their own padlock.

The VI13800 voltage indicator and matching PD440V proving unit are supplied in the TC69 combination carry case, keeping them together to ensure that the proving device is always at hand. The VI13800 is the perfect voltage indicator for safe isolation, it's safe because it's simple with no ranges, switches or batteries to worry about, reducing the risk of a failing to identify a live voltage.

The kit comprises of 14 different locking devices for simple fitting to all MCBs, RCBOs and fuse holders. There is a plastic body padlock with unique key and a 6mm hardened steel shackle for securing the locking devices. The kit is completed with 5 warning tags, a marker pen and a durable case with space for storing additional accessories.

• Kit includes:
• 1x safety voltage indicator (VI13800)
• 1x matching proving device (PD440V)
• 1x ultimate PRO lock out kit (LOKKITPRO)
• 1x padlock with unique key (PAD10R)
• 1x cartridge fuse isolation lock (LOK6)
• 1x cable lock-off (CABLOK)
• 1x hasp (LOKHASP25)
• 1x plunge locking piece (LOK15)
• 1x appliance plug lock out (PL13)
• 1x MCB green isolation lock (LOK1)
• 1x MCB yellow isolation lock (LOK2)
• 1x MCB blue isolation lock (LOK3)
• 1x MCB small red isolation lock (LOK4)
• 1x MCB red isolation lock (LOK5)
• 1x slimline grey isolation lock (LOK7)
• 1x yellow MCB lock, 10mm clip (LOK10)
• 1x red MCB lock, 6mm clip (LOK11)
• 5x 'Equipment locked out' tags which can be written on (TAG4)
• 1x black marker pen (LOKMP)
• 1x TC68 soft carry case (TC68)

The most comprehensive solution for safe isolation of installations up to 1000V, the Martindale VIPDLOKPRO150 lock out kit contains the VI15000 voltage indicator, matching PD690 proving device and LOKKITPRO which contains the full range of Martindale locking off devices, all supplied in two convenient soft carry cases. The kit simplifies compliance with Health & Safety recommendations for safe working practices when maintaining or installing electrical plant and equipment.

The LOKKITPRO is the ultimate lock out kit enabling safe isolation procedures to be carried out in all types of facility. The kit is ideal for contractors and maintenance teams working on industrial and commercial sites as it includes the full range of Martindale locking off devices, compatible with all distribution boards and red spot type fuse holders. It includes the latest LOK7 slimline MCB lock for use on breakers where the position of the test button may prevent the use of conventional lock outs or access is restricted, plus a 1m cable lock device suitable for both electrical and mechanical locking out and a steel hasp for use with multiple padlocks for when more than one operator is working on the same installation. Multi-lock hasps ensure a circuit cannot be re-energised until each operator has finished work and removed their own padlock.

The VI15000 voltage indicator and matching PD690 proving unit are supplied in the TC69 combination carry case, keeping them together to ensure that the proving device is always at hand. The VI15000 is the perfect voltage indicator for safe isolation, it's safe because it's simple with no ranges, switches or batteries to worry about, reducing the risk of a failing to identify a live voltage.

The kit comprises of 14 different locking devices for simple fitting to all MCBs, RCBOs and fuse holders. There is a plastic body padlock with unique key and a 6mm hardened steel shackle for securing the locking devices. The kit is completed with 5 warning tags, a marker pen and a durable case with space for storing additional accessories.

• Kit includes:
• 1x 1000V safety voltage indicator (VI15000)
• 1x matching proving device (PD690)
• 1x ultimate PRO lock out kit (LOKKITPRO)
• 1x padlock with unique key (PAD10R)
• 1x cartridge fuse isolation lock (LOK6)
• 1x cable lock-off (CABLOK)
• 1x hasp (LOKHASP25)
• 1x plunge locking piece (LOK15)
• 1x appliance plug lock out (PL13)
• 1x MCB green isolation lock (LOK1)
• 1x MCB yellow isolation lock (LOK2)
• 1x MCB blue isolation lock (LOK3)
• 1x MCB small red isolation lock (LOK4)
• 1x MCB red isolation lock (LOK5)
• 1x slimline grey isolation lock (LOK7)
• 1x yellow MCB lock, 10mm clip (LOK10)
• 1x red MCB lock, 6mm clip (LOK11)
• 5x 'Equipment locked out' tags which can be written on (TAG4)
• 1x black marker pen (LOKMP)
• 1x TC68 soft carry case (TC68)