A ventilated power supply case moulded in flame-retardant (UL 94V-0) ABS.

• Free-standing PSU case
• 2.7mm thickness ABS material
• Black colour
• 130mm length, 92mm width, 66mm height
• Two halves of the case are held together by four self-tapping screws (supplied)
• Base has moulded-in bosses and locating lugs for transformers and other associated circuitry
• Both ends of case have rectangular cut-outs (approx, 10 x 8mm) for cable entry and exit
• Top of the case has recessed area for labels
• Evatron type FE1N

A ventilated power supply case moulded in flame-retardant (UL 94V-0) ABS.

• Free-standing PSU case
• 1.2mm thick ABS material
• Black colour
• 100mm length, 70mm width, 58mm height
• Two halves of the case are held together by four self-tapping screws (supplied)
• Both ends of the case have rectangular cut-outs (approx, 10 x 8mm) for cable entry and exit
• Top of the case has recessed area for labels
• Evatron type FE2 LTL

PSU case from Evatron FE Series, with standard 13A plug pins, moulded in black flame-retardant ABS to UL 94V-0.

• Flying leads soldered to the live and neutral pins
• Brass earth pins
• Case secured by self-tapping screws through the base with recessed label/logo panels on front surface
• Shuttered ventilation slots for improved heat dissipation
• Accepts non-encapsulated EI48 6 to 12V size transformer
• Cable exit hole is approx. 6 x 4mm, in the top of the case

PSU case from Evatron FE Series, with standard 13A plug pins, moulded in black flame-retardant ABS to UL 94V-0.

• Flying leads soldered to the live and neutral pins
• Brass earth pins
• Case secured by self-tapping screws through the base with recessed label/logo panels on the front surface
• Internal cover plate fits over the live and neutral pins for additional insulation and accepts EI18 transformer
• Cable exit hole is approx. 6 x 3mm and is in the bottom of the case

• Plug-in module case
• Internally moulded PCB guidesPolypropylene, noryl base material
• Black colour
• 77mm length, 80mm width, 42mm height
• Snap fit, large enclosure
• Supplied with a PCB, which can be soldered to the pins in the base for easy connection
• Evatron type PP17N

A two-part ABS case with black textured finish and removable ABS front panel.

• Ideal for use as a transformer or power supply case, or for housing a printed circuit board
• Six bosses, suitable for self-tapping screws, are moulded into the bottom part of the case for mounting PCBs or a chassis plate
• Maximum PCB/chassis size 100 x 65mm
• The two halves of the case are held together by four self-tapping screws, supplied
• Maximum dimensions: 131 x 75 x 62mm