The CamdenBoss Lugged Lid ABS Box Black (65 x 38 x 22mm) 400 Series is from an extensive range of ABS boxes incorporating lugs for ease of surface mounting, as well as cable in- and outlets. Supplied with flush fitting lid.

• Maximum protection of electronic components against shock, chemicals, moisture and temperature
• Compliance with water absorption specifications to DIN 53495
• ABS material is highly resistant against most chemicals
• High rigidity and impact strength

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

• Maximum protection of electronic components against shock, chemicals, moisture and temperature
• Compliance with water absorption specifications to DIN 53495
• ABS material is highly resistant against most chemicals
• High rigidity and impact strength

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

The CamdenBoss Lugged Lid ABS Box Black (82 x 57 x 33mm) 400 Series is from an extensive range of ABS boxes incorporating lugs for ease of surface mounting, as well as cable in- and outlets. Supplied with flush fitting lid.

• Maximum protection of electronic components against shock, chemicals, moisture and temperature
• Compliance with water absorption specifications to DIN 53495
• ABS material is highly resistant against most chemicals
• High rigidity and impact strength

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

• 5A current rating
• 62mm diameter
• BS6220 approved
• Manufacturer's part WA075

Robust, sealed ABS enclosure with black base and black cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 80 x 73 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE01S-A-BB-0

Robust, sealed ABS enclosure with grey base and grey cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 80 x 73 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE01S-A-GG-0

A robust, sealed ABS enclosure with black base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 80 x 73 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE01S-A-TB-0

A robust, sealed ABS enclosure with grey base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 80 x 73 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE01S-A-TG-0

A robust, sealed ABS enclosure with black base and black cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 106 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE02S-A-BB-0

A robust, sealed ABS enclosure with grey base and grey cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 106 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE02S-A-GG-0

A robust, sealed ABS enclosure with black base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 106 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE02S-A-TB-0

A robust, sealed ABS enclosure with grey base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 106 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE02S-A-TG-0

A robust, sealed ABS enclosure with black base and black cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 139 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE03S-A-BB-0

Robust, sealed ABS enclosure with grey base and grey cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 139 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE03S-A-GG-0

Robust, sealed ABS enclosure with black base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 139 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE03S-A-TB-0

A robust, sealed ABS enclosure with grey base and transparent cover from Evatron, specially designed and manufactured for use in the electrical and electronic engineering markets.

• Size 139 x 80 x 53mm
• 2 x Threaded M20 cable entry knockout for use with M20 cable gland
• Captive plastic screws to lid fixing for corrosion resistance, increased torque and insulation
• PCB mounting posts and slots as standard
• Sealed to IP67
• Manufactured in ABS to UL 94V-0 and UL 94-HB
• Also available are DIN mounting clips and wall mounting flanges in black or grey
• Manufacturer's part DE03S-A-TG-0

Black DIN mounting clip for use with Evatron DE Series enclosures.

Grey DIN mounting clip for use with Evatron DE Series enclosures.

A grey wall mounting flange for use with Evatron DE Series enclosures.

Surface mounting grey junction box, 100 x 100 x 50mm, with 6 holes. This box has a screwed lid and has been designed for ease of installation while providing the highest level of protection against the ingress of water and solid matter.

Surface mounting junction box measuring 100 x 100 x 50mm from Gewiss, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 204

Surface mounting junction box measuring 120 x 80 x 50mm from Gewiss, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 205

Surface mounting junction box measuring 150 x 110 x 70mm from Gewiss, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 206

Surface mounting junction box measuring 190 x 140 x 70mm from Gewiss, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 207

A surface mounting junction box measuring 380 x 300 x 120mm from Gewiss, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 210

A surface mounting junction box measuring 190 x 140 x 140mm from the Gewiss GW 44 series, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• High lid version
• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP56 Protection
• Supplied with screw on lid and no holes
• Supplied in grey
• Halogen free
• Manufacturer's part GW 44 217

Grey surface mounting junction box, 100 x 100 x 50mm, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP55 Protection degree
• Supplied with quick fix lid and no holes

Grey surface mounting junction box, 150 x 110 x 70mm, designed for both ease of installation and use, as well as providing the highest level of protection against the ingress of water and solid matter.

• Made from technopolymer
• Ideal for normal junction, special and industrial uses
• IP55 Protection degree
• Supplied with quick fix lid and no holes

This in-line connector box from Hylec is supplied complete with a pre-installed 4-pole VDE-approved 16A terminal block.

• Virtually tool-less assembly
• External hand removable lugs for mounting - no tools required
• Supplied with butterfly clip for locking
• Cable retention achieved through ratchet clips on each box end
• IP 20 rated enclosure with pre-cut cable lead-in
• Dimensions 105 x 55 x 29mm
• Made from UL94 V0-rated white polypropylene
• Conforms to EN60598-1 glow wire test to 650°C
• Hylec type DEKSB-002

Supplied with spare butterfly clip.

This in-line connector box from Hylec is supplied complete with a pre-installed 4-pole VDE-approved 16A screwless 4-pole 16A terminal block.

• Virtually tool-less assembly
• External hand removable lugs for mounting - no tools required
• Supplied with butterfly clip for locking
• Cable retention achieved through ratchet clips on each box end
• IP 20 rated enclosure with pre-cut cable lead-in
• Dimensions 97 x 50 x 28.5mm
• Made from UL94 V0-rated white polypropylene
• Conforms to EN60598-1 glow wire test to 650°C
• Hylec type DEKSB-003

Supplied with spare butterfly clip.

The Hylec Debox SL2 is the smallest five-pole 32A junction box on the market and the only product supplied complete with 5 screwless lever-operated terminal blocks. Each individual lever connector can take up to three conductors.

Debox SL2 saves valuable time by making installation easier for both small and large internal wiring jobs, as everything you need is in the box and no tools are needed to join the wires or securely close the box.

The lever operated terminal blocks provide a better connection than push-fit terminals and are suitable for use with round or flat cables and with 2 core or 3 core cables like flat twin-and-earth cable. Debox SL2 is suitable for use in commercial or domestic wiring applications including lighting.

• 100% tool-free assembly
• Terminal blocks: 5x 3-pole, lever operated
• Current rating: 32A
• For cable sizes: 0.5 to 2.5mm²
• Flame retardant to UL94 V0
• Complete with tool-less locking clip & spare locking clip
• Width: 47mm
• Height: 35mm
• Length: 107mm
• Conforms to EN60598-1 (Glow wire test 650°C) and EN60670-22 (Pull Test)
• Material: polypropylene
• Hylec type DEKSB-004/5

Terminal junction boxes. Available in white or brown, in various amperage's.

20 Amp, 4 Terminals.

Terminal junction boxes. Available in white or brown, in various amperage's.

5 Amp, 4 Terminal White.

Moulded grey junction box from Spelsberg.

• 6 x M20
• 1 x M16 knockout
• 5 entry seals
• Terminal capacity 2.5mm²
• IP55 rated
• Complies with E DIN IEC 60998-2-5, Ui = 40V

Moulded grey junction box from Spelsberg.

• 7 x M20/25
• 4 x M20 knockouts
• 7 entry seals
• Terminal capacity 10mm²
• IP55 rated
• Complies with E DIN IEC 60998-2-5, Ui = 690V

Junction box with 7 knockouts without terminals from Spelsberg moulded in light grey flame-resistant, halogen-free thermoplastic with snap-fit lid offering sealing to IP55.

• Styling similar to the Abox range
• Dedicated recessed marking area for labels and logos
• Seven or twelve breakout entries for cable glands, up to 18mm dia.
• Other cable entries can be simply cut with a knife
• May be surface mounted with screws (not supplied), either inside the box or externally on fixing lugs
• Fixing lugs have additional slots which allow them to be used as a fixing for cable ties
• VDE, CEBEC, OVE, FEMKO approved

Junction box with 12 knockouts without terminals from Spelsberg moulded in light grey flame-resistant, halogen-free thermoplastic with snap-fit lid offering sealing to IP55.

• Styling similar to the Abox range
• Dedicated recessed marking area for labels and logos
• Seven or twelve breakout entries for cable glands, up to 18mm dia.
• Other cable entries can be simply cut with a knife
• May be surface mounted with screws (not supplied), either inside the box or externally on fixing lugs
• Fixing lugs have additional slots which allow them to be used as a fixing for cable ties
• VDE, CEBEC, OVE, FEMKO and SEMKO approved

High quality light grey moulded polystyrene junction box from Spelsberg with terminal block.

• Dimensions: 80 x 80 x 52mm
• Screw fitting lids and moulded-in membrane cable entries (M20) which give IP65 sealing without the need for cable glands
• Internal mounting holes with sealing covers
• 8 x M20 knockouts
• 2 to 16mm seal range
• Approvals: VDE, OVE, CEBEC, KEMA-KEUR, DEMKO, SEMKO, FEMKO, NEMKO

High quality light grey moulded polystyrene junction box from Spelsberg with external mounting lugs.

• Dimensions: 80 x 80 x 52mm
• Screw fitting lids and moulded-in membrane cable entries (M20) which give IP65 sealing without the need for cable glands
• Internal mounting holes with sealing covers
• 8 x M20 knockouts
• 2 to 16mm seal range
• Approvals: VDE, OVE, CEBEC, KEMA-KEUR, DEMKO, SEMKO, FEMKO, NEMKO

A 3-pole, light grey terminal block type junction box from the Takachi 89 series.

• Light grey
• 3 pole
• 24 x 65 x 33mm
• Integrated junction box consisting of cable glands and a terminal block
• IP65 rated
• Supplied with 2 pieces each of 5 and 7.4 rubber cable bushes
• Suitable for industrial applications, power cable joints, wiring for motors or sensors, etc.
• IP65 rated

The WAGOBOX® 207-3301 junction box is designed for use with the WAGO 221 and 2773 series connectors.

WAGO Box; Branch; for multicore cables; 221-4; 221-41x, 2773 series; max. 4 mm² connectors; without splicing connectors; for BS 5733 - MF; grey

The WAGOBOX® junction box is rated 400V/4kV and can support conductor sizes from 0.2mm² to 4mm².The maximum number of supported individual conductor connections is 20. Each cable clamp can grip cables with an overall diameter between 3mm and 8mm.

• Quick and easy to install
• General purpose electrical enclosure designed for use with WAGO 221 and 2273 series connectors (not included)
• Maintenance free connections to BS5733-MF for inaccessible areas
• Adjustable cable tie
• Screwless design
• Complies with BS EN 60670-22, BS 7671 and configurable to BS 5733-MF (see Data Sheet for further information)
• Compatible with conductor sizes from 0.2mm² to 4mm²
• Time saving installation
• 39mm x 44mm x 108mm (W x H x D)
• Manufacturers part 207-3301

A multipurpose electrical junction enclosure that has been designed for use with WAGO 222 and 773 series connectors.

The WAGOBOX is easier to use, quicker to fit and more configurable than any other junction box of its size. It is the first of its type and redefines the standard for general purpose domestic and commercial junction boxes.

• Fast - installing a WAGOBOX can take as little as 25% of the time it takes to install a screw terminal box
• Cables are cut to size and connected outside the WAGOBOX
• No awkward connections in small spaces
• Easy to use - no screws or fiddly clamp bars
• Cables slot into position and are secured in seconds
• Uses simple to fit WAGO 773 and 222 series connectors
• Supports up to 6 cables
• Fits through a 60mm diameter spotlight hole
• Integrated cable clamp secures flex, 6242Y and 6243Y cables from 1 to 6mm² twin and earth
• Robust cable grippers can be configured in seconds to grip cables up to 8mm in diameter
• Mix and match the 222 and 773 series connectors to suit the job with up to 24 individual terminations
• Dimensions: 108 x 44 x 39mm
• Complies with BS EN 60670-22
• Configurable to BS 5733-MF
• Meets all the requirements of the 17th Edition of BS 7671

The WAGOBOX® XL 207-3304 junction box is designed for use with the WAGO 221 and 2773 series connectors.

WAGO Box; Branch; for multicore cables; XL; 221-41x, 2773 series; max. 4 mm² connectors; without splicing connectors; for BS 5733 - MF; grey

The WAGOBOX® XL junction box is rated 450V/4kV and can support conductor sizes from 0.14mm² to 4mm².The maximum number of supported individual conductor connections is 36. Each cable clamp can grip cables with an overall diameter between 3mm and 15mm.

• Quick and easy to install
• General purpose electrical enclosure designed for use with WAGO 221 and 2273 series connectors (not included)
• Maintenance free connections to BS5733-MF for inaccessible areas
• Adjustable cable tie
• Screwless design
• Complies with BS EN 60670-22, BS 7671 and configurable to BS 5733-MF (see Data Sheet for further information)
• Compatible with conductor sizes from 0.14mm² to 4mm²
• Time saving installation
• 125mm x 55mm x 115mm (W x H x D)
• Manufacturers part 207-3304

The WAGO Box 207-3309, L32 wiring centre is a simple, quick and safe way of connecting up to 32 conductors.

WAGO Box; Branch; for multicore cables; L32; 221 Series; max. 4 mm² connectors; with splicing connectors; for BS 5733 - MF; white

The WAGOBOX® L32 comes ready for use with WAGO 221-4xx series connectors included, and is designed for wall/surface mounting using the four screw holes provided. The following 221 series connectors are fitted in position, ready for use:4 x 5 lever terminal blocks (21-5764)2 x 3 lever terminal blocks (21-6013)3 x 2 lever terminal blocks (21-5763)

The WAGO 221-4xx series connectors are suitable for use with conductor sizes from 0.2mm² to 4mm² (solid/stranded), 0.14mm² to 4mm² (fine-stranded).

• Quick, simple and safe connection of up to 32 conductors
• L32 wiring centre uses the WAGO 221 series compact lever connectors.
• The L32 wiring centre is rated at 450V/4kV and can support conductor sizes up to 4mm²
• Time saving installation
• Cable entries from behind or bottom cut outs
• Adjustable cable clamps
• Satisfies the requirements of both 'S' and 'Y' connection schematics
• Easy mounting with 4 integral mounting holes
• Unique design on underside aids mounting on uneven surfaces
• 161mm x 115mm x 36mm (W x H x D)
• Manufacturers part 207-3309

The WAGO 207-4301 Junction Box wiring centre is a simple, quick and safe way of connecting up to 60 conductors.

Junction box; Branch; for multicore cables; 221 Series; max. 4 mm² connectors; without splicing connectors; white

The junction box is designed for surface screw mounting on the wall/ceiling. The cover can be snapped on and off without screws. The connectors are easily mounted by snapping them into position, and the marking strips are mounted by simply pushing them in.

The Junction Box is designed for use with the WAGO 221-4xx series connectors, suitable for conductor sizes from 0.2mm² to 4mm² (solid/stranded), 0.14mm² to 4mm² (fine-stranded).

• Quick, simple and safe connection of up to 60 conductors
• Designed for use with WAGO 221-4 series connectors (not included)
• A clear structured arrangement, secured on one level
• Clearly visible labelling of each individual connection point
• Time saving installation
• Operating Temperature Range: -25 to 85°C
• 225mm x 46mm x 145mm (W x H x D)
• Manufacturers part 207-4301

The WAGOBOX® Abox enclosure is an IP65 rated connector box that is designed for use with the WAGO 221-4xx series connectors. The Abox is ideal for lighting and power applications in agricultural and garden settings.

The Abox is supplied with five WAGO 221 series connectors.

• General purpose electrical enclosure designed for use with WAGO 221 series connectors
• The Abox is rated at 450V/4KV
• IP65 rated enclosure with cable entry holes
• Mounting bracket included for use with WAGO 221 series connectors
• Blanking plugs and fixing covers included
• 110mm x 67mm x 100mm (W x H x D)
• Manufacturers part 60290788

The Wiska Combi 308/5 BK is an ideal junction box for inside and outside applications. With their unique design and highest quality, they have met the most demanding installer requirements for years: The Combi 308/5 BK junction box series is an original in every respect.

• Dimensions: 85 x 85 x 51mm
• Colour: black
• Terminal block included: yes
• UV and Ozone resistant, suitable for inside as well as outside installations
• Bellied cover allows 10% more installation space
• High protection class IP66 - with cable gland IP67
• Captive and rust-free quick-release lid screws allow closing of the box with only a quarter turn
• Flame-retardant and halogen-free, weather-proof, resistant to ultraviolet, shatter-proof, impact-resistant
• Wiska type Combi 308/5 BK

The Wiska Combi 607/5/2xKRM25/20 BK is an ideal junction box for inside and outside applications. With their unique design and highest quality, they have met the most demanding installer requirements for years: The Combi 607/5/2xKRM25/20 BK junction box series is an original in every respect.

• Dimensions: 110 x 110 x 66mm
• Colour: black
• Terminal block included: no
• UV and Ozone resistant, suitable for inside as well as outside installations
• Bellied cover allows 10% more installation space
• High protection class IP66 - with cable gland IP67
• Captive and rust-free quick-release lid screws allow closing of the box with only a quarter turn
• Flame-retardant and halogen-free, weather-proof, resistant to ultraviolet, shatter-proof, impact-resistant
• Wiska type Combi 607/5/2xKRM25/20 BK