The Keithley DAQ6510 is a precision data acquisition and logging system that creates a new level of simplicity compared with the often complicated configuration and control found in many stand-alone solutions.

A large 5-inch (12.7 cm) multi-touch display will guide users through set-up, data visualisation, and analysis, removing the necessity of a PC and custom software for many applications. If you prefer or require a PC, a complement of IVI and Labview drivers and the Keithley KickStart Instrument Control Software are available to help with any application.

With 12 plug-in switching and control modules available and two module slots, you can build a test system that can measure or control up to 80 devices-under-test (DUTs) in a multiplexing configuration. With two 6×8 matrix modules, a total of 96 crosspoints, the DAQ6510 can test one or multiple ICs.

For high volume production testing, select a solid state multiplexer module to maximise throughput with 800 channels/s scanning speed and minimise downtime compared with fixed life, electro-mechanical relays.

A number of modules have cold junction compensation, temperature references for thermocouple temperature monitoring of devices during environmental testing, and HALT and HASS accelerated life testing.

Even switch signals from wireless devices with RF modules having a maximum switching frequency of 3.5 GHz.

Note that this product is supplied with the Keithley 7700 20 channel multiplexer.

• Large, 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
• 2-year specified, full featured, traceable 6½-digit multimeter with 0.0025% DCV (1 V, 10 V ranges) basic accuracy
• Standard LAN/LXI and USB-TMC communication interfaces
• Optional interfaces include GPIB, RS-232, and TSP-Link® Technology
• 12 different switch, RF, and control modules to connect to as many as 80 DUTs in one test setup
• Up to 80 2-pole channels of thermocouple, RTD, or thermistor temperature measurements
• Scanning speeds as high as 800 channels/second with the solid state relay module
• Front panel jacks for stand-alone DMM operation
• KickStart easy-to-use control software with a data acquisition and logging application
• Three-year warranty

To purchase a Keithley DAQ6510 without the 20 channel multiplexer, see 85-1869.

The Keithley DAQ6510 is a precision data acquisition and logging system that creates a new level of simplicity compared with the often complicated configuration and control found in many stand-alone solutions.

A large 5-inch (12.7 cm) multi-touch display will guide users through set-up, data visualisation, and analysis, removing the necessity of a PC and custom software for many applications. If you prefer or require a PC, a complement of IVI and Labview drivers and the Keithley KickStart Instrument Control Software are available to help with any application.

With 12 plug-in switching and control modules available and two module slots, you can build a test system that can measure or control up to 80 devices-under-test (DUTs) in a multiplexing configuration. With two 6×8 matrix modules, a total of 96 crosspoints, the DAQ6510 can test one or multiple ICs.

For high volume production testing, select a solid state multiplexer module to maximise throughput with 800 channels/s scanning speed and minimise downtime compared with fixed life, electro-mechanical relays.

A number of modules have cold junction compensation, temperature references for thermocouple temperature monitoring of devices during environmental testing, and HALT and HASS accelerated life testing.

Even switch signals from wireless devices with RF modules having a maximum switching frequency of 3.5 GHz.

• Large, 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
• 2-year specified, full featured, traceable 6½-digit multimeter with 0.0025% DCV (1 V, 10 V ranges) basic accuracy
• Standard LAN/LXI and USB-TMC communication interfaces
• Optional interfaces include GPIB, RS-232, and TSP-Link® Technology
• 12 different switch, RF, and control modules to connect to as many as 80 DUTs in one test setup
• Up to 80 2-pole channels of thermocouple, RTD, or thermistor temperature measurements
• Scanning speeds as high as 800 channels/second with the solid state relay module
• Front panel jacks for stand-alone DMM operation
• KickStart easy-to-use control software with a data acquisition and logging application
• Three-year warranty

To purchase a Keithley DAQ6510 with the 7700 20 channel multiplexer included, see 85-1999.

The Lascar EL-USB-5 is a Standalone Data Logger that can record events (detecting an input and storing the time and date of occurrence), record state changes (similar to an 'event' but also recording when the input reverts back to normal) and count events (count the number of events that happen in a time period, without any individual event time or date information). Up to 32,510 events or 32,510 state changes can be recorded. Events and state changes can be triggered by either a rising edge (a voltage going from low to high) or falling edge (a voltage going from high to low). It is also possible to use Volt free contacts. Instead of measuring an external voltage, the data logger applies a voltage across the screw terminals and detects when the input closes (i.e. a relay or microswitch). The data logger is supplied complete with software, measurement leads terminated with crocodile clips and a long-life lithium battery which allows logging for up to 1 year. Functionality of the unit is indicated by flashing red and green LEDs, with an option to flash the red LED every time an event occurs. For further details see the FAQ at www.lascarelectronics.com.

• Functions as an event logger, state change logger and event counter
• Logging rate of up to four times per second for events, two times per second for state changes and 100 times per second when counting
• Stores up to 32,510 readings in event mode
• Stores up to 32,510 readings in state change mode
• Stores up to 32,510 timed intervals in event counter mode
• Accepts input voltages of up to 24V
• Volt free contacts option (normally open contact only)
• Rising and falling edge triggering
• LED flash on event / state change
• Connection via two screw terminals
• USB Interface for set-up and data download
• Supplied with replaceable internal lithium battery, Windows control software and measurement leads
• Manufacturer's part: Lascar EL-USB-5