The Greisinger GES 130 is an Insertion Temperature Sensor for Soft Media. The probe is fitted with a with a K-type thermocouple input, and would suit the temperature gauge Greisinger GTH 1150. This sensor is extra thin, just 1,5mm in diameter. This makes the sensor especially fast because its small mass is quickly heated or cooled.
The Probe can be used with any temperature measuring instrument that is designed to accept Type K probes with a Thermocouple plug.
Accurate and thin temperature sensors
Thin stylus on Ø1,5mm provides the very fast response time
Measuring tip length 130mm, 1,5mm diameter
Wire length 105cm
Measuring range -65°C to 550°C
Response time t90 = approximately 3 seconds
Suitable for use with Greisinger GTH 1150 and other thermometers with type K
The Greisinger GTF 900 is an Immersion Probe that will allow you to measure temperature levels of liquids and gases between the range of -65°C to +1000°C. The probe has been designed to work with thermocouple thermometers with Type K inputs.
It has a 1m silicone cable terminated with a mini thermocouple DIN plug.
This short thermistor probe is designed for the monitoring of ambient air temperature and are for use with the Lascar EL-MOTE-T data logger. The Lascar EL-MOTE range of EasyLog data loggers are Cloud-based wireless sensors that use the EasyLog Cloud to communicate with your devices, either by using the EasyLog Cloud app or a standard internet browser. The EasyLog Cloud harnesses the power of IoT to automate data logging and alert notifications, enabling the monitoring and management of multiple sensors, in different locations, completely remotely. The system scales according to your needs - perfect for compact systems right up to corporate solutions with thousands of devices around the globe.
Standard version
Stub temperature probe
To get started with the EasyLog Cloud set up an account here. The Cloud app can be downloaded here.
This short high accuracy thermistor probe is designed for the monitoring of ambient air temperature and are for use with the Lascar EL-MOTE-T data logger. The Lascar EL-MOTE range of EasyLog data loggers are Cloud-based wireless sensors that use the EasyLog Cloud to communicate with your devices, either by using the EasyLog Cloud app or a standard internet browser. The EasyLog Cloud harnesses the power of IoT to automate data logging and alert notifications, enabling the monitoring and management of multiple sensors, in different locations, completely remotely. The system scales according to your needs - perfect for compact systems right up to corporate solutions with thousands of devices around the globe.
High accuracy version
Stub temperature probe
To get started with the EasyLog Cloud set up an account here. The Cloud app can be downloaded here.
The Lascar EL-OEM-TEST is a Development Board designed to assist in development of circuits using the EL-OEM-3 data logger.
The EL-OEM-TEST features a mini-USB connector, battery socket, and development options for input signal conditioning including positions for scaling resistors and an op-amp circuit. There is also a small bread-boarding area provided. With the interface designed and tested, the required circuitry can be transferred to a product specific PCB.
Designed for use with EL-OEM-3
Supplied with 3.6V 1/2AA battery
USB interface for setup and download of data
Bread-boarding area provided
Manufacturer's part: Lascar EL-OEM-TEST
PLEASE NOTE: The Lascar EL-OEM-TEST is supplied with a battery and mini-USB cable for communication. It does NOT include an EL-OEM-3 module.
The Lascar EL-USB-CASE is a Rugged Metal Case that provides additional waterproof protection for the EL-USB-1 data logger (order code 85-3529 and 85-3419). This will allow the data logger to record temperatures in particularly harsh environments.
N.B. The EL-USB-2 can also benefit from the additional waterproof protection of the EL-USB-CASE, however, it would be limited to measuring temperature only.
The Lascar EL-WiFi-T is a WiFi Temperature Data Logging Sensor that measures the temperature of the environment in which it is situated. Data is transmitted wirelessly via a Wi-Fi network to a PC and viewed via the graphing tool or can be exported to Excel. The software installed on the PC will allow set up, data logging and data review.
Set up features will include sensor name, °C/°F, sample rate, and high/low alarms. This software is available to download for free from www.lascarelectronics.comDuring configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 120 days at 10 second sample interval). The range of the sensor can be increased by using Wi-Fi extenders.
Wirelessly stream and view data via Wi-Fi on PC or EasyLog Cloud
Easy sensor set-up using free PC software application
View and analyse multiple sensors, including graphing of historic data
Temperature measurement range -20 to +60°C (-4 to +140°F)
Configurable high and low alarms with indicator
Sensor memory stores all data even if Wi-Fi is temporarily disconnected
Manufacturer's part: Lascar EL-WiFi-T
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-T+ is a High Accuracy Wi-Fi Temperature Data Logging Sensor that measures the temperature of the environment in which it is situated. This high accuracy version is accurate to ±0.1°C. Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using our free software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-T+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.lascarelectronics.com/software.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws / sticky pad provided.
WiFi capability and integrated display
Cloud enabled
Wireless connectivity to PC via WiFi
Temperature accuracy ±0.1°C (-10°C to +60°C)
Measurement range from -20°C to +60°C (-4°F to +140°F)
Configurable high and low alarms with indicator
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-T+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-T+ is a High Accuracy Wi-Fi Temperature Data Logging Sensor that measures the temperature of the environment in which it is situated. This high accuracy version is accurate to ±0.1°C. Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using our free software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-T+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.lascarelectronics.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws / sticky pad provided.
Measurement range from -20°C to +60°C (-4°F to +140°F)
Configurable high and low alarms with indicator
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-T+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TC is a WiFi Thermocouple Temperature Data Logging Sensor that measures the temperature of the environment in which the probe is situated. The accuracy of the K type probe supplied is ±1.5°C. Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using our free software package or on the EasyLog Cloud. This software is available to download for free from www.lascarelectronics.com.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 30 days at 10 second sample interval). Logged data is retained if the battery goes flat. Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
WiFi capability and integrated display
Cloud enabled
Wireless connectivity to PC via WiFi
View and analyse multiple sensors using the PC application, including immediate graphing of historic data
Temperature measurement range -270°C to +1300°C (-454°F to +2372°F) (probe dependent)
Rechargeable internal lithium polymer battery
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TC
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TC is a WiFi Thermocouple Temperature Data Logging Sensor that measures the temperature of the environment in which the probe is situated. The accuracy of the K type probe supplied is ±1.5°C. Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using our free software package or on the EasyLog Cloud. This software is available to download for free from www.lascarelectronics.com.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 30 days at 10 second sample interval). Logged data is retained if the battery goes flat. Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
View and analyse multiple sensors using the PC application, including immediate graphing of historic data
Temperature measurement range -270°C to +1300°C (-454°F to +2372°F) (probe dependent)
Rechargeable internal lithium polymer battery
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TC
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TH is a WiFi Temperature and Humidity Data Logging Sensor that measures the temperature and humidity of the environment in which it is situated. Data is transmitted wirelessly via a Wi-Fi network to a PC and viewed using a FREE software package. This software is available to download for free from www.lascarelectronics.com.
During configuration the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 60 days at 10 second sample interval). The range of the sensor can be increased by using Wi-Fi extenders.
WiFi capability and integrated display
Cloud enabled
Wireless connectivity to PC via WiFi
View and analyse multiple sensors using the PC application, including immediate graphing of historic data
Measurement range from -20°C to +60°C (-4°F to +140°F)
Rechargeable internal lithium polymer battery
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TH
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TH+ is a High Accuracy Wi-Fi Temperature and Humidity Data Logging Sensor that measures the temperature and humidity of the environment in which it is situated. This high accuracy version is accurate to ±0.2°C and ±1.8%RH humidity. The data is then streamed wirelessly over any Wi-Fi network and can be viewed on a PC using free software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-TH+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for FREE from www.lascarelectronics.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws/ sticky pad provided.
Measurement range from -20°C to +60°C (-4°F to +140°F)
Temperature accuracy ±0.2°C (0°C to +60°C)
Humidity accuracy ±1.8% (10 to +90%RH)
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TH+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TH+ is a High Accuracy Wi-Fi Temperature and Humidity Data Logging Sensor that measures the temperature and humidity of the environment in which it is situated. This high accuracy version is accurate to ±0.2°C and ±1.8%RH humidity. The data is then streamed wirelessly over any Wi-Fi network and can be viewed on a PC using free software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-TH+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for FREE from www.lascarelectronics.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws/ sticky pad provided.
Measurement range from -20°C to +60°C (-4°F to +140°F)
Temperature accuracy ±0.2°C (0°C to +60°C)
Humidity accuracy ±1.8% (10 to +90%RH)
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TH+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TP is a WiFi Temperature Probe Data Logging Sensor that measures the temperature of the environment in which the probe is situated. Data is transmitted wirelessly via a Wi-Fi network to a PC and viewed using a free software package. This software is available to download for FREE from www.lascarelectronics.com.
During configuration the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 120 days at 10 second sample interval). The range of the sensor can be increased by using Wi-Fi extenders.
The probe can be used in a wide range of temperature situations e.g. manufacturing processes, cold storage and hot storage.
The EL-WiFi-TP is a low powered battery device. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year. The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported to Excel.
Measurement range -40°C to +125°C (-40°F to +257°F)
Main unit IP55, probe IP67
Rechargeable internal lithium polymer battery
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TP
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TP is a WiFi Temperature Probe Data Logging Sensor that measures the temperature of the environment in which the probe is situated. Data is transmitted wirelessly via a Wi-Fi network to a PC and viewed using a free software package. This software is available to download for FREE from www.lascarelectronics.com.
During configuration the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 120 days at 10 second sample interval). The range of the sensor can be increased by using Wi-Fi extenders.
The probe can be used in a wide range of temperature situations e.g. manufacturing processes, cold storage and hot storage.
The EL-WiFi-TP is a low powered battery device. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year. The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported to Excel.
Measurement range -40°C to +125°C (-40°F to +257°F)
Main unit IP55, probe IP67
Rechargeable internal lithium polymer battery
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TP
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TP+ is a High Accuracy Wi-Fi Temperature Probe Data Logging Sensor that measures the temperature of the environment in which it is situated. This high accuracy version is accurate to ±0.1°C . Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using the FREE software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-TP+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.lascarelectronics.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws/sticky pad provided.It is supplied with a thermistor probe with an attachment so that it can be securely fixed to flat surfaces. It is perfect for a wide range of temperature monitoring situations e.g. manufacturing processes, cold storage and hot storage. The probe is removable so alternatives can also be used to meet specific requirements providing they operate within the same temperature range.
Measurement range from -40°C to +125°C (-40°F to +257°F)
Temperature display resolution to 0.01°C
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TP+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Lascar EL-WiFi-TP+ is a High Accuracy Wi-Fi Temperature Probe Data Logging Sensor that measures the temperature of the environment in which it is situated. This high accuracy version is accurate to ±0.1°C . Data is streamed wirelessly over any Wi-Fi network and can be viewed on a PC using the FREE software package or on the EL-WiFi-Cloud.
During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using Wi-Fi extenders.
The EL-WiFi-TP+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adaptor using the USB lead provided or can be permanently powered by the USB wall adaptor.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.lascarelectronics.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws/sticky pad provided.It is supplied with a thermistor probe with an attachment so that it can be securely fixed to flat surfaces. It is perfect for a wide range of temperature monitoring situations e.g. manufacturing processes, cold storage and hot storage. The probe is removable so alternatives can also be used to meet specific requirements providing they operate within the same temperature range.
Measurement range from -40°C to +125°C (-40°F to +257°F)
Temperature display resolution to 0.01°C
Calibration certificate available
Manufacturer's part: Lascar EL-WiFi-TP+
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.
The Circuits Shop
