The Lascar EL-OEM-3 is an OEM Packaged Component Style Voltage Data Logger that measures and stores up to 64,000 voltage readings over a 0 to 2.4V DC measurement range.
It can be incorporated into new and existing products without the need to specifically develop a hardware and software platform.
The user can easily set up the logging rate and start time, and download the stored data by connecting the data logger to a PC's USB port and running the purpose designed software under Windows 2000, XP Vista and 7. The data can then be graphed, printed and exported to other applications. The USB protocol information can be purchased, to integrate the data logger into custom software.
PCB Mounted (2.54mm pitch, header sockets)
0 to 2.4V DC Measurement Range
Logging Rates between 1s and 12hr
Stores 64,000 readings
Data Rollover mode (Allows extended logging by overwriting the oldest data when the memory is full)
USB interface for set-up and data download (USB connector not included on module. Module not designed to be permanently connected to USB)
User-programmable alarm thresholds
Nominal 3V supply voltage
Immediate and delayed logging modes
Free Windows control software available
Complete integration is possible with the purchase of the USB interface protocol. Please contact Lascar Electronics for more information
The Lascar EL-USB-3 is a voltage data logger that will collect up to 32, 510 voltage readings over a 0 to 30V DC range. The collected data is simply downloaded to a PC via a USB port, where it can be analysed, printed or exported to other programs using the included, purpose designed software.
The unit may also be set up via the software so that logger name, measurement rate, high and low alarms and start date and time may be adjusted to the required value.
Supplied with a set of crocodile clip terminated test leads and featuring a pair of screw terminals, this data logger can accept measurements from a wide range of sensors and is suitable for use in a wide range of applications.
Voltage measurement range 0 to 30V DC
Unit set-up and data download via simple USB connection
Includes Windows software for unit configuration and data manipulation
Programmable sample rates
LED indication for unit status
Two user-programmable alarm thresholds
Data stored in non-volatile memory
Connection via two screw terminals housed in cap
Powered by 1x ½AA 3.6V lithium battery (supplied) - for suitable replacement see Batteries section
The Lascar EL-USB-4 current loop data logger can measure and store up to 32,000 readings over a 4 to 20mA DC measurement range. The unit is simply plugged into the USB port of a PC to download the data. Using the included, purpose designed software the data logger may be set up by changing the logger name, logging rate, high and low alarms and start date and time. Also, the software can be used to analyse the downloaded data, displaying powerful interactive graphs and enabling the data to be printed or exported. Measurements are taken via the included set of crocodile clip terminated test leads which attach to the data logger via a pair of screw terminals housed in the unit cap.
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.
The Circuits Shop
