This PCI Interface Card USB 2.0 4+1x from LogiLink® is an expansion card that can be installed to your PC featuring four external and one internal USB 2.0 interface, allowing the connection of compatible devices.This card can be installed in a PCI slot of your PC where the internal and external connections are standardised so they are able to work in any PC.

• 4x USB 2.0 Type A female external
• 1x USB 2.0 Type A female intern
• Automatic IRQ address
• 480 Mbit/s maximum transfer rate
• Internal overvoltage protection
• Manufacturer's part PC0028

This 13-Port USB 2.0 Hub from LogiLink® is compliant to USB1.1/2.0 specification and supports USB 2.0 high-speed up to 480Mbps. This hub is also compatible with older USB devices and remains easy to install - no additional driver is required. Also included with the hub is a 230V AC adaptor and a USB cable.

• On/off switch
• Compatible with USB 2.0 standard
• LED indicator for activity
• 480 Mbit/s maximum speed
• USB connection cable
• 5V/3.5A power supply included
• Built-in over-current detection and protection
• Manufacturer's part UA0126

LogiLink's Blue USB 2.0 Hub is a modern-looking hub from the Smile range which is not only fast, but also supports the modern USB 2.0 standard, along with a maximum speed up to 480 Mbit/s connection. This hub is also extended by another 4 ports and is able to connect with older USB devices. No driver installation is needed.

• Blue colour
• 1 x Up-stream port and 4 x Down-stream ports
• Hot Plug and Plug & Play
• Manufacturer's part UA0136

LogiLink's Black USB 2.0 Hub is a hub which is not only fast, but also supports the modern USB 2.0 standard, along with a maximum speed up to 480 Mbit/s connection. This hub can also connect with older USB devices, while no driver installation is needed.

• Black colour
• 4x USB ports
• Hot Plug and Plug & Play
• Manufacturer's part UA0139

This 4-port hub from Transcend has been designed for use with Ultrabooks and thin-and-light laptops, transforming a single USB 3.0 port into four ports, instantly expanding the number of high-performance USB 3.0 devices so you can connect to your computer at the same time.

With the included power adaptor, the Hub3 can supply high output currents of up to 2A via its dedicated fast charging port, allowing the Apple iPad and other portable devices with demanding power requirements to charge much quicker than using a standard USB port.

• Super-Speed USB 3.0 interface (also compatible with USB 2.0)
• Provides 2A output current for charging iPad
• Up to 10x faster than USB 2.0
• Supports USB battery charging specification v1.2
• LED indicates device insertion
• Interface USB 2.0/USB 3.0
• System requirements: Windows XP/Vista/7/8/10, Mac OS X 10.2.8, or later and Linux Kernel 2.6.30 or later
• Operating temperature: 0°C to +60°C
• Dimensions: 78.6 (L) x 49.5 (W) x 15mm (H)
• Weight: 44g
• Manufacturer's part TS-HUB3K