A T5 200mcd wedge base yellow LED indicator, featuring a protection diode and a load resistor, which means the LED can be directly used from a 24V AC or DC supply.

A T5 1000mcd wedge base white LED indicator, with a clear lens, featuring a protection diode and a load resistor, which means the LED can be directly used from a 24V AC or DC supply.

high quality 5mm LED panel mounting LED indicator in green. CML-IT 1904x25x series.

A high quality 5mm 2.2V 32mcd green LED indicator with a prominent black chrome bezel. Panel mount design.

A high quality 5mm 2V 80mcd red LED indicator with a prominent black chrome bezel. Panel mount design.

5mm 24V 1200mcd red LED indicator. Panel mount, sunlight visible, satin chrome prominent bezel, high brightness, M8 fixing.

5mm 24V 1300mcd green LED indicator. Panel mount, sunlight visible, satin chrome prominent bezel, high brightness, M8 fixing.

This ultra bright yellow LED panel indicator comes in a screw mounting E5.5 case that has a recessed internal reflector. Operating voltage is 15 to 18V AC and the viewing angle is 50°.

• Integrated protection diode and series resistor
• Base E5.5
• Dimensions (ø x L) 5.6 x 16mm
• Life time 50,000 hours

This ultra bright white LED panel indicator comes in a screw mounting E5.5 case that has a recessed internal reflector. Operating voltage is 15 to 18V AC and the viewing angle is 50°.

• Integrated protection diode and series resistor
• Base E5.5
• Dimensions (ø x L) 5.6 x 16mm
• Life time 50,000 hours

A 24V white LED panel indicator with a T1 3/4 MG base. The lamp has an ultra bright output and a long lifetime as well as integrating a protection diode and series resistor that makes possible AC operation. Ideal for use as a replacement for conventional lamps.

• Base T1 3/4 MG
• Dimensions (ø x H) 5.6 x 21.6mm
• Life time 20,000 hours

A 24V white LED panel indicator with an E5.5 base. The lamp has an ultra bright output and a long lifetime as well as integrating a protection diode and series resistor that makes possible AC operation. Ideal for use as a replacement for conventional lamps.

• Base E5.5
• Dimensions (ø x H) 5.6 x 21.6mm
• Life time 20,000 hours

This 5.7mm warm white LED panel indicator has a design of reflector and diverging lens that gives it a wide viewing angle similar to that of a more expensive multi-chip LED. The lamp is capable of bipolar working and is suitable for AC and DC operation.

• Operating voltage 24 to 28V AC/DC
• MG base
• Push-fit mounting
• 5.7mm Body for mounting in a ø5.8mm cut out
• Lifetime 50,000 hours

A red 5mm LED Panel indicator with a round lens head and a 12 to 14V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A red 5mm LED Panel indicator with a round lens head and a 24 to 28V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A yellow 5mm LED Panel indicator with a round lens head and a 24 to 28V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A green 5mm LED Panel indicator with a round lens head and a 24 to 28V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A red 5mm LED Panel indicator with a square lens head and a 12 to 14V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A yellow 5mm LED Panel indicator with an arrow-shaped lens head and a 12 to 14V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A green 5mm LED Panel indicator with an arrow-shaped lens head and a 12 to 14V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

A white 5mm LED Panel indicator with an arrow-shaped lens head and a 12 to 14V AC/DC operating voltage. The indicator is of the snap-in mounting type and has a frosted lens surface that gives a high level of light transmission and a clear on/off contrast.

• Superflat lens head
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm
• Max. mounting depth 23 mm

24V DC red LED panel indicator with a 5mm body for snap-fit mounting. The lamp has an external reflector and is finished in black. The frosted surface of the lens gives good on/off contrast and high light transmission.

• Snap-in mounting
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm

12V DC yellow LED panel indicator with a 5mm body for snap-fit mounting. The lamp has an external reflector and is finished in black. The frosted surface of the lens gives good on/off contrast and high light transmission.

• Snap-in mounting
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm

24V DC yellow LED panel indicator with a 5mm body for snap-fit mounting. The lamp has an external reflector and is finished in black. The frosted surface of the lens gives good on/off contrast and high light transmission.

• Snap-in mounting
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm

24V DC green LED panel indicator with a 5mm body for snap-fit mounting. The lamp has an external reflector and is finished in black. The frosted surface of the lens gives good on/off contrast and high light transmission.

• Snap-in mounting
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm

24V DC white LED panel indicator with a 5mm body for snap-fit mounting. The lamp has an external reflector and is finished in black. The frosted surface of the lens gives good on/off contrast and high light transmission.

• Snap-in mounting
• Soldering tags 1.3 x 0.3mm
• Mounting hole ø5 +0.2mm