The Ducati 4.16.10.08.14 3UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications. This product is supplied without any fixing hardware.

A 3µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø28 x 55mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 4UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 4µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø25 x 55mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 5UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 5µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø28 x 55mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 8UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

An 8µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø32 x 55mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 10UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 10µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø36 x 58mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 12UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 12µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø36 x 70mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 15UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 15µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø36 x 70mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

An 18µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø40 x 70mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 20UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 20µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø40 x 70mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

A 25µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø40 x 92mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 40UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 40µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø45 x 92mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.30.14 50uF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with an M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 50µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø45 x 117mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

A 60µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø50 x 117mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 30UF Leaded Plastic Case Capacitor is a self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 30µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø40 x 92mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised

The Ducati 4.16.10.08.14 2UF Leaded Plastic Case Capacitor is self healing metallised polypropylene motor run capacitor encapsulated in a leaded plastic case and is fitted with a M8 x 10mm stud for mounting. Termination is via a 250mm double insulated 2-core lead which meets IP55. It meets the requirements of flammability test to UL 94V-0. Used for motor start and motor run applications.

A 2µF metallised polypropylene film capacitor in a plastic case. Designed for motor start and motor run applications.

• Size Ø28 x 55mm
• Tolerance 5%
• Fitted with an M8 x 10mm stud for mounting
• Terminated by double 6.3mm FASTON push-in connector
• Non-inductive winding means low losses
• Self-healing properties avoids short circuits
• Small size and weight
• No leakage risk
• Case and cover made from self-extinguishing material
• Capacitive element is sealed with resin
• Safety protection class P0
• UL 94V-0 recognised