This 8A 230V AC DPDT relay interface module acts as an ideal interface for PLC and electronic systems. The module consists of a 40 series relay, a 95 series DIN rail mounting socket with retaining clip, and a 99 series LED module. This combination of components gives excellent performance and includes LED indication of supply status and EMC coil suppression as standard.

• AC Coil
• Screw terminals
• Instant ejection of relay using retaining clip
• Identification label
• UL Listing
• IP20 Protection

This module includes a relay, relay socket, bracket and LED module with snubber diode.

This module includes a relay, relay socket, bracket and LED module with snubber diode.

A relay interface module that has a coil voltage of 12V DC, SPCO contacts and screw termination.

• 35mm rail mounting
• 15.8mm wide
• Instant ejection of relay using plastic retaining clip
• Supply status indication and EMC coil suppression module as standard
• Mechanical indicator & test button
• CE, UL, cRUus, IMQ, CSA, VDE, GOST approved

This Finder Diode Module is an EMC suppression module that is designed for use with Finder sockets and relays as follows: Finder sockets: 90.20, 90.21, 94.72, 94.73, 94.74, 94.82, 95.63, 96.72, 96.74. Finder relays: 60.12, 60.13, 55.32, 55.33, 55.32, 55.34, 55.32, 40.31, 56.32, 56.34.

• Provides suppression of coil back-emf on switch-off
• Finder 99 Series

This Finder 99.80 series module contains a free-wheel (flyback) diode to protect relay driver circuits from negative going voltage spikes. A green LED shows when the coil is energized. The module is designed to fit into a compatible socket together with the relay it suppresses. This EMC suppression and indicator module is compatible with the following sockets and relays;

screw sockets 84.84.2, 94.54.1, 94.82.3, 94.84.3, 94.92.3, 94.94.3, 95.55.3, 95.83.3, 95.85.3, 95.93.3 and 95.95.3

Finder relays 40.31, 44.52, 44.62, 55.32, 55.34, 40.51/52/61 and 44.52/62 series.

• Free-wheel (flyback) diode protection circuit
• LED indicator
• 6 to 24VDC

A 16A 12V DC single pole relay interface module that features coil/contact separation. The module is supplied complete with relay, socket, LED, ejector clip and identification label, making it easy to order all these components with just one part number. Suitable for many applications, e.g. industrial automation, heating and cooling systems, elevators, etc.

• Status LED
• Changeover contacts
• 35mm DIN Rail mounting
• cRU Approval

A 16A 24V DC single pole relay interface module that features coil/contact separation. The module is supplied complete with relay, socket, LED, ejector clip and identification label, making it easy to order all these components with just one part number. Suitable for many applications, e.g. industrial automation, heating and cooling systems, elevators, etc.

• Status LED
• Changeover contacts
• 35mm DIN Rail mounting
• cRU Approval

An 8A 24V DC double pole relay interface module that features coil/contact separation. The module is supplied complete with relay, socket, LED, ejector clip and identification label, making it easy to order all these components with just one part number. Suitable for many applications, e.g. industrial automation, heating and cooling systems, elevators, etc.

• Status LED
• Changeover contacts
• 35mm DIN Rail mounting
• cRU Approval

A 6A 24V AC/DC DIN rail mounting relay interface module that combines a relay and mounting socket in one package to make ordering simple. The relay has a sensitive coil and is suitable for many applications, e.g. industrial automation, heating and cooling systems, elevators, etc.

• 35mm DIN Rail mounting
• Compact 6mm wide design
• Instant removal of relay using plastic retaining clip
• cRU Approval

A DIN-rail mounting relay socket that is designed for the 788 series of pluggable switching relays. Suitable for 15mm SPDT-CO relays with a pin spacing of 5mm.

• CAGE CLAMP termination

A 24V AC 12A DPDT general purpose DIN rail mounting relay module that features mechanical and electrical indicators and a manual test tab.

• Consists of an PT relay, DIN rail socket, retaining clip, module and marking tag
• Suitable for industrial use
• VDE and UL approvals

A 24V DC 6A DPDT general purpose DIN rail mounting relay module that features mechanical and electrical indicators and a manual test tab.

• Consists of an PT relay, DIN rail socket, retaining clip, module and marking tag
• Suitable for industrial use
• VDE and UL approvals

A 24V DC 16A SPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive DC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

A 24V AC 16A SPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

A 230V AC 16A SPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

A 24V DC 8A DPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive DC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

A 24V AC 8A DPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

A 230V AC 8A DPDT DIN rail mounting relay module suitable for general purpose use.

• Consists of an RT relay, DIN rail socket, retaining clip, module and marking tag
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• VDE and UL approvals

An 8A 24V AC DPDT relay module that consists of an XT series plug-in relay, a DIN rail mounting socket, plastic retaining clip and marking tag. Additional features include a manual test tab and mechanical and electrical indicators.

• Rated voltage 240V AC
• Switching voltage 400V AC
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• Approvals VDE, CULus

An 8A 115V AC DPDT relay module that consists of an XT series plug-in relay, a DIN rail mounting socket, plastic retaining clip and marking tag. Additional features include a manual test tab and mechanical and electrical indicators.

• Rated voltage 240V AC
• Switching voltage 400V AC
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• Approvals VDE, CULus

An 8A 230V AC DPDT relay module that consists of an XT series plug-in relay, a DIN rail mounting socket, plastic retaining clip and marking tag. Additional features include a manual test tab and mechanical and electrical indicators.

• Rated voltage 240V AC
• Switching voltage 400V AC
• Sensitive AC coil
• Reinforced insulation
• Jumper bars for interconnection
• Approvals VDE, CULus

A DIN-rail mounting relay socket that is designed for the 788 series of pluggable switching relays. Suitable for 25mm SPDT-CO relays with a pin spacing of 5mm.

• CAGE CLAMP termination

A DIN-rail mounting relay socket that is designed for the 788 series of pluggable switching relays. Suitable for 15mm DPDT-CO relays with a pin spacing of 5mm.

• CAGE CLAMP termination

A DIN-rail mounting relay socket that is designed for the 788 series of pluggable switching relays. Suitable for 25mm DPDT-CO relays with a pin spacing of 5mm.

• CAGE CLAMP termination

A pluggable status indicator module designed for use with the 788 series.

This WAGO 788-303 12VDC 16A SPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

This WAGO 788-304 24VDC 16A SPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

A 110V DC SPDT-CO small switching relay module that plugs into a DIN-rail mounting socket, along with a switching status LED indicator. The components are removed via a simple and efficient lever that lifts and ejects the modules. The relay modules are ideal for use in industrial and process automation switching relay applications.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 30 x 10⁶ operations
• CAGE CLAMP termination

This WAGO 788-311 12VDC 8A DPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

This WAGO 788-312 24VDC 8A DPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

A 48V DC DPDT-CO small switching relay module that plugs into a DIN-rail mounting socket, along with a switching status LED indicator. The components are removed via a simple and efficient lever that lifts and ejects the modules. The relay modules are ideal for use in industrial and process automation switching relay applications.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 30 x 10⁶ operations
• CAGE CLAMP termination

A 110V DC DPDT-CO small switching relay module that plugs into a DIN-rail mounting socket, along with a switching status LED indicator. The components are removed via a simple and efficient lever that lifts and ejects the modules. The relay modules are ideal for use in industrial and process automation switching relay applications.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 30 x 10⁶ operations
• CAGE CLAMP termination

This relay module consists of a 24V SPDT-CO miniature switching relay together with an electrical and mechanical power indicator, both mounted in a DIN-Rail mounting socket. The switching specification of 4kVA and 250V AC means that this relay module is suitable for a wide variety of applications.

• Plug base with miniature switching relay and indicator
• Connection via CAGE CLAMP tension spring terminals
• Ultra-compact switching relay
• Plug-and-play
• IP20 Rating

This relay module consists of a 24V DPDT-CO miniature switching relay together with an electrical and mechanical power indicator, both mounted in a DIN-Rail mounting socket. The switching specification of 4kVA and 250V AC means that this relay module is suitable for a wide variety of applications.

• Plug base with miniature switching relay and indicator
• Connection via CAGE CLAMP tension spring terminals
• Ultra-compact switching relay
• Plug-and-play
• IP20 Rating

This WAGO 788-354 24VDC 16A SPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

A 24V DC SPDT-CO miniature switching relay with gold coated contacts.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 3 x 10⁷ operations
• CAGE CLAMP termination

A 230V AC SPDT-CO miniature switching relay with gold coated contacts.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 3 x 10⁷ operations
• CAGE CLAMP termination

This WAGO 788-506 24VDC 16A SPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

A 115V AC SPDT-CO small switching relay module that plugs into a DIN-rail mounting socket, along with a switching status LED indicator. The components are removed via a simple and efficient lever that lifts and ejects the modules. The relay modules are ideal for use in industrial and process automation switching relay applications.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 30 x 10⁶ operations
• CAGE CLAMP termination

This WAGO 788-508 230VAC 16A SPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

This WAGO 788-512 24VDC 8A DPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

This WAGO 788-515 115VAC 8A DPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

This WAGO 788-516 230VAC 8A DPDT-CO Relay Module is fitted with a Red LED status indicator. The module is DIN-35 Rail mountable, and utilises push-in CAGE CLAMP® technology for efficient installation.

• Reinforced insulation between coil and contacts
• Easy commoning using adjacent jumpers
• Marking using WMB Multi markers and group marker carriers
• Push-in CAGE CLAMP® technology
• DIN-35 Rail mountable

A 24V DC DPDT-CO miniature switching relay with gold coated contacts.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 3 x 10⁷ operations
• CAGE CLAMP termination

A 115V AC DPDT-CO miniature switching relay with gold coated contacts.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 3 x 10⁷ operations
• CAGE CLAMP termination

A 230V AC DPDT-CO miniature switching relay with gold coated contacts.

• DIN-rail mounting
• Integrated test ports for simple and efficient troubleshooting
• Status indication through pluggable LED module with integrated recovery diode
• Insulated, pluggable jumper system suitable for both coil and load side
• WMB Marking
• Integrated recovery diode
• Mechanical life 3 x 10⁷ operations
• CAGE CLAMP termination

Part of the JUMPFLEX range, this device is a DIN-rail mounting relay base designed to accept miniature switching relays.

• Rated 24V AC/DC
• Yellow LED status indication
• CAGE CLAMP tension spring wire connection

A 500mA 24V DC dual optocoupler module that is supplied in a DIN-rail mounting housing just 6mm wide. The optocoupling design provides electrical isolation between the control side and the load side. The module features a flexible in-line jumper system (e.g. for supply voltages), eliminating discreet wiring.

• DPDT-CO Circuit
• 24V DC Control
• Pluggable relays can be replaced quickly and easily
• Switch status is indicated by an integrated yellow LED
• Connection via CAGE CLAMPS spring tension terminals

12V DC miniature switching relay that plugs into a base with the JUMPFLEX system that utilises a single, flexible in-line jumper system (e.g. for supply voltages) that eliminates discrete wiring. The relays can be replaced quickly and easily when required.

• DIN-rail mounting
• Load voltage 250V AC/DC
• SPDT-CO Circuit
• Mechanical life 5 x 10⁶ operations
• CAGE CLAMP termination