The Sauter HBD 100-0 is an Analogue Shore Hardness Tester used to test the hardness of several different types of material. This tester will allow you to conduct comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'Shore'.

The HBD 100-0 comes with Shore D which is suitable for use with plastics, Formica epozides, plexi glass and other similar materials.

• Compact handheld durometer with drag indicator
• Typically used for measurements of penetration (Shore)
• Two shore types available
• MAX mode holds the maximum value taken on the display
• Point mode shows one instant value
• Developed according to the following standards:
• DIN 53505
• ASTM D2240
• ISO 868
• Compatible with Sauter test stand TI-A0 and TI-D (sold separately)
• Supplied in a stylish wooden carrying case

The Sauter HD0 100-1 Shore hardness tester is designed to determine the indentation hardness of materials like soft rubber, thermoplastic elastomers, very soft plastics and thermoplastics and medium-density textile windings, and produces a hardness value between 0 and 100.

• Uses exclusive Micro-computer LSI circuitry and crystal time base for high accuracy
• Large back-lit digital display
• RS232C interface for communication with a PC for recording, printing and analyzing
• Internal memory for up to 500 measurements
• Supplied complete with hard carrying case
• Particularly recommended for internal comparison measurement
• Selectable automatic power-off to conserve power
• Sauter type HD0 100-1

The Sauter HDA 100-1 Shore hardness tester is designed to determine the indentation hardness of materials like soft vulcanized rubber, natural, thermoplastic elastomers, flexible polyacrylics and thermosets, wax, felt and leathers, and produces a hardness value between 0 and 100.

• Uses exclusive Micro-computer LSI circuitry and crystal time base for high accuracy
• Large back-lit digital display
• RS232C interface for communication with a PC for recording, printing and analyzing
• Internal memory for up to 500 measurements
• Supplied complete with hard carrying case
• Particularly recommended for internal comparison measurement
• Selectable automatic power-off to conserve power
• Sauter type HDA 100-1

The Sauter HDD 100-1 Shore hardness tester is designed to determine the indentation hardness of materials like hard rubber, thermoplastic elastomers, harder plastics and rigid thermoplastics, and produces a hardness value between 0 and 100.

• Uses exclusive Micro-computer LSI circuitry and crystal time base for high accuracy
• Large back-lit digital display
• RS232C interface for communication with a PC for recording, printing and analyzing
• Internal memory for up to 500 measurements
• Supplied complete with hard carrying case
• Particularly recommended for internal comparison measurement
• Selectable automatic power-off to conserve power
• Sauter type HDD 100-1

When a hardness test is carried out by the Sauter HMM Leeb hardness meter, an impact body with a tungsten carbide test tip is propelled by spring force against the surface to be tested, from which it rebounds.

Impact and rebound velocities are measured by the following method: a permanent magnet integrated into the impact body passes through a coil and induces an electric voltage during its travels back and forth. The voltages are proportional to the velocities and are processed and displayed as the hardness value 'L' by the meter.

• External impact sensor (Type D) included
• Automatic recognition of the external impact sensor
• Large, easy to read display with backlight
• High level of mobility and flexibility
• Automatic compensation function permits measurement in all directions
• Internal memory for up to 9 data groups, with up to 9 values per group
• Mini statistics function: displays the measured result, the average value, the impact direction, date and time
• Highly accurate, ± 6 HL
• User profiles for fast change of all settings
• Conversion to all common hardness scales HRC, HRB, HB, HV, HSD and tensile strength (MPa)
• Battery powered, 3x AAA
• Wireless IR printer included for on-site printing
• Supplied complete with hard carrying case and standard block for calibration
• Conforms to the Standard ASTM A956-02
• Sauter type HMM

When a hardness test is carried out by the Sauter HN-D Leeb hardness meter, an impact body with a tungsten carbide test tip is propelled by spring force against the surface to be tested, from which it rebounds.

Impact and rebound velocities are measured by the following method: a permanent magnet integrated into the impact body passes through a coil and induces an electric voltage during its travels back and forth. The voltages are proportional to the velocities and are processed and displayed as the hardness value 'L' by the meter.

• Built-in type D impact sensor
• Convenient for all materials
• Best suited for on-site testing of large, heavy or previously installed parts
• Handy for difficult to access test locations
• Automatic sensing and compensation for impact direction
• Ideal for material selection and acceptance tests
• Designed for one-hand operation
• High luminosity LCD display with backlight
• Selectable measuring units: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)
• Internal data memory for up to 500 measurements with date and time
• USB-PC data output
• Supplied complete with hard carrying case
• Sauter type HN-D