Flat base compact 10A terminal block from the Metway Series 230, supplied with 12 poles in 2 rows without wire protectors. These blocks are designed to provide a 10A current rating within a shorter length housing. They are supplied in 12-pole strips which can be cut to any shorter length required.

• 6.5mm pitch
• Screw termination
• UL and VDE approved
• Manufacturer's part 23012

Flat base compact 10A terminal block from the Metway Series 230, supplied with 12 poles in 2 rows with wire protectors. These blocks are designed to provide a 10A current rating within a shorter length housing. They are supplied in 12-pole strips which can be cut to any shorter length required.

• 8mm pitch
• Screw termination
• UL and VDE approved
• Manufacturer's part 230HDS12

Flat base compact 10A terminal block from the Metway Series 500 supplied with 12 poles in 2 rows without wire protectors. The blocks are supplied in 12-pole strips which can be cut to any shorter length required. Captive M3 steel screws are fitted as standard.

• 10mm pitch
• Screw termination
• UL and VDE approved
• Manufacturer's part 50012/35

These Metway 162STS Series 2-pole 'Maxi' low voltage connectors incorporate both plug and socket into a single connector.

They can be inter-connected to each other by simply rotating one of them through 180°. Due to their low profile of only 8mm, they are particularly suitable for use in confined areas and are mechanically coded to prevent incorrect connection.

• Moulding: nylon 6.6 (PA6/6), UL94 V0
• Inserts: brass, silver-plated
• Screws: M3 steel, zinc-plated, chromed
• Screw tightening torque: max: 0.3Nm
• Maximum temperature: short term: 160ºC, continuous: 100ºC
• Current rating: 25A
• Voltage rating: 48V AC
• Conductor size: 0.5mm² – 2.5mm²: solid or ferruled
• Wire stripping length: 7mm
• Protection class: IP 20
• Colour: grey
• Metway type AC 162 STS/2

Operating tool from WAGO suitable for use with SMD PCB terminal blocks from the 2059 series.

• Pin spacing 3mm
• Manufacturer's part 2059-189

White 1-pole SMD terminal block from WAGO with PUSH WIRE® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 3mm
• Conductor size 0.5mm²
• Width 2.9mm
• Height 2.7mm
• Depth 7.9mm
• Manufacturer's part 2059-301/998-403

White 2-pole SMD terminal block from WAGO with PUSH WIRE® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 3mm
• Conductor size 0.5mm²
• Width 5.9mm
• Height 2.7mm
• Depth 7.9mm
• Manufacturer's part 2059-302/998-403

White 3-pole SMD terminal block from WAGO with PUSH WIRE® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 3mm
• Conductor size 0.5mm²
• Width 8.9mm
• Height 2.7mm
• Depth 7.9mm
• Manufacturer's part 2059-303/998-403

SMD PCB terminal blocks from WAGO with pushbutton and push-in CAGE CLAMP® connection, supplied in tape-and-reel packaging for automated assembly.

• Height of just 4.5 mm minimises on-board LED shadowing
• Suitable for lead-free, reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to max. 260°C peak temperature
• Colour: white
• Pin spacing: 4mm
• Tin-plated copper alloy contacts
• 1-way terminal block
• Terminates conductors from 24 to 18 AWG (0.2 to 0.75mm²)
• Push-buttons for easy connection and removal of all types of conductors
• Group arrangement is possible without losing any poles
• Manufacturer's part 2060-451/998-404

SMD PCB terminal blocks from WAGO with pushbutton and push-in CAGE CLAMP® connection, supplied in tape-and-reel packaging for automated assembly.

• Height of just 4.5 mm minimises on-board LED shadowing
• Suitable for lead-free, reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to max. 260°C peak temperature
• Colour: white
• Pin spacing: 4mm
• Tin-plated copper alloy contacts
• 2-way terminal block
• Terminates conductors from 24 to 18 AWG (0.2 to 0.75mm²)
• Push-buttons for easy connection and removal of all types of conductors
• Group arrangement is possible without losing any poles
• Manufacturer's part 2060-452/998-404

SMD PCB terminal blocks from WAGO with pushbutton and push-in CAGE CLAMP® connection, supplied in tape-and-reel packaging for automated assembly.

• Height of just 4.5 mm minimises on-board LED shadowing
• Suitable for lead-free, reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to max. 260°C peak temperature
• Colour: white
• Pin spacing: 4mm
• Tin-plated copper alloy contacts
• 3-way terminal block
• Terminates conductors from 24 to 18 AWG (0.2 to 0.75mm²)
• Push-buttons for easy connection and removal of all types of conductors
• Group arrangement is possible without losing any poles
• Manufacturer's part 2060-453/998-404

Black 1-pole SMD PCB terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 4mm
• Conductor size 0.75mm²
• Rated current 9A
• Height of just 4.5mm minimises on-board LED shadowing
• Width 3.9mm
• Depth 13.1mm
• Manufacturer's part 2060-471/998-404

Black 2-pole SMD PCB terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 4mm
• Conductor size 0.75mm²
• Rated current 9A
• Height of just 4.5mm minimises on-board LED shadowing
• Width 7.9mm
• Depth 13.1mm
• Manufacturer's part 2060-472/998-404

Black 3-pole SMD PCB terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Pin spacing 4mm
• Conductor size 0.75mm²
• Rated current 9A
• Height of just 4.5mm minimises on-board LED shadowing
• Width 11.9mm
• Depth 13.1mm
• Manufacturer's part 2060-473/998-404

A 2-pole SMD PCB terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Colour: white
• Pin spacing 8mm
• Conductor size 0.75mm²
• Current rating 9A
• Width 11.9mm
• Height 4.5mm
• Depth 13.1mm
• Manufacturer's part 2060-852/998-404

A 2-pole SMD PCB terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Colour: black
• Pin spacing 8mm
• Conductor size 0.75mm²
• Current rating 9A
• Width 11.9mm
• Height 4.5mm
• Depth 13.1mm
• Manufacturer's part 2060-872/998-404

White 1-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 5.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-601/998-404

White 2-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 11.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-602/998-404

White 3-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 17.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-603/998-404

Black 1-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 5.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-621/998-404

Black 2-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 11.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-622/998-404

Black 3-pole SMD PCB push button terminal block from WAGO with CAGE CLAMP® connection supplied in tape and reel packaging for automated assembly.

These terminal blocks are suitable for lead-free reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to 260°C peak temperature.

• Push-in termination of solid and ferruled conductors
• Push-buttons simplify insertion/removal of all conductor types
• Pin spacing 6mm
• Conductor size 1.5mm²
• Current rating 17.5A
• Width 17.7mm
• Height 5.6mm
• Depth 15.8mm
• Manufacturer's part 2061-623/998-404

Operating tool from WAGO suitable for use with SMD terminal blocks from the 2060 series.

• Pin spacing 3mm
• Manufacturer's part 206-859

Operating tool from WAGO suitable for use with terminal blocks from the 2060 series.

• Pin spacing 4 to 8mm
• Manufacturer's part 206-860