A 2A subminiature relay from the HFD2 series that come in a DIL-16 package. The relay is of the single side stable type with a 3V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.2 x 10.6

A 2A subminiature relay from the HFD2 series that come in a DIL-16 package. The relay is of the single side stable type with a 5V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.2 x 10.6

A 2A subminiature relay from the HFD2 series that come in a DIL-16 package. The relay is of the 1 coil latching type with a 5V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.2 x 10.6

A 2A subminiature relay from the HFD2 series that come in a DIL-16 package. The relay is of the 1 coil latching type with a 12V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.2 x 10.6

A 2A subminiature relay from the HFD2 series that come in a DIL-16 package. The relay is of the 2 coil latching type with a 12V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.2 x 10.6

A 2A subminiature signal relay from the HFD23 series that has a 150mW high sensitivity 5V DC coil and a SPDT contact configuration.

• 12.5 x 7.5 x 10.0mm

A 2A subminiature signal relay from the HFD23 series that has a 150mW high sensitivity 12V DC coil and a SPDT contact configuration.

• 12.5 x 7.5 x 10.0mm

A 2A subminiature signal relay from the HFD23 series that has a 150mW high sensitivity 24V DC coil and a SPDT contact configuration.

• 12.5 x 7.5 x 10.0mm

A 2A subminiature relay from the HFD27 series that comes in a DIL-16 package. The relay has 5V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.0 x 11.5mm

A 2A subminiature relay from the HFD27 series that comes in a DIL-16 package. The relay has 12V DC coil and a DPDT contact configuration. Features a 150mW high sensitivity coil and a case that is epoxy sealed for automatic wave soldering and cleaning.

• High switching capacity
• Bifurcated contacts
• 20.2 x 10.0 x 11.5mm

A 1A subminiature signal relay from the HFD4 series with a single side stable 12V DC coil and a DPDT contact configuration. Comes in a compact SMT package that gives excellent board space savings.

• Low power consumption
• High contact capacity
• 14.0 x 9.0 x 5.0mm

A 1A subminiature signal relay from the HFD4 series with a single side stable 5V DC coil and a DPDT contact configuration. Comes in a compact SMT package that gives excellent board space savings.

• Low power consumption
• High contact capacity
• 14.0 x 9.0 x 5.0mm

A 2A subminiature signal relay from the HFD4 series with a single side stable 24V DC coil and a DPDT contact configuration. Comes in a SMT package.

• Low power consumption
• 10.0 x 6.5 x 5.4mm

A 2A subminiature signal relay from the HFD4 series with a single side stable 5V DC coil and a DPDT contact configuration. Comes in a SMT package.

• Low power consumption
• 10.0 x 6.5 x 5.4mm

A DPCO signal relay that features a low profile DIL package that is fully sealed for immersion cleaning.

• DIL Package
• High sensitivity coil
• Ultra low profile, minimal board footprint
• Fully sealed for immersion cleaning
• Low magnetic interference
• FCC Part 68 compliant
• UL recognised, CSA Certified

A DPCO signal relay that features a low profile DIL package that is fully sealed for immersion cleaning.

• DIL Package
• High sensitivity coil
• Ultra low profile, minimal board footprint
• Fully sealed for immersion cleaning
• Low magnetic interference
• FCC Part 68 compliant
• UL recognised, CSA Certified

This SPCO relay is fully sealed for immersion cleaning, is ultra small in size and has a high coil sensitivity.

• 1 Form C (SPCO) contacts
• 12V DC nominal coil voltage
• Fully sealed for immersion cleaining
• Ultra small size
• High coil sensitivity 150mW
• Sealed to IP67
• UL/CUR recognised

A new generation signal relay that features a compact and light weight UL recognised construction that also meets Bell-Core standard requirements.

• Compact and light weight
• 2 Form C (DPCO) contacts
• 12V Nominal coil voltage
• Low power consumption (140mW)
• Super high density mounted
• Meets Bell–Core standard requirements
• Meets IEC950/UL1950/EN60950 insulation distance
• UL recognised, CSA certified

A new generation signal relay that features a compact and light weight UL recognised construction that also meets Bell-Core standard requirements.

• Compact and light weight
• 2 Form C (DPCO) contacts
• 5V Nominal coil voltage
• Low power consumption (140mW)
• Super high density mounted
• Meets Bell–Core standard requirements
• Meets IEC950/UL1950/EN60950 insulation distance
• UL recognised, CSA certified

A 1A 12V DC relay from the TQ series. Features a small, DIL type body with PCB terminals. The device enjoys a high surge withstand voltage and has a 2 form C (DPCO) contact configuration and 2 coil latching design. The reliability of the relay is enhanced by the use of gold-clad twin crossbar contacts. The relay is suitable for high density mounting on PCBs and the DIL terminal array enables the use of IC sockets. Typical applications for this relay include: communications equipment measurement devices, OA equipment and industrial machines.

• Flat, compact body
• 200mW Operating power
• Outstanding surge resistance
• High reliability contacts
• Low thermal electromotive force
• Sealed construction allows washing

A 1A 5V DC relay from the TQ series. Features a small, DIL type body with PCB terminals. The device enjoys a high surge withstand voltage and has a 2 form C (DPCO) contact configuration and 2 coil latching design. The reliability of the relay is enhanced by the use of gold-clad twin crossbar contacts. The relay is suitable for high density mounting on PCBs and the DIL terminal array enables the use of IC sockets. Typical applications for this relay include: communications equipment measurement devices, OA equipment and industrial machines.

• Flat, compact body
• 200mW Operating power
• Outstanding surge resistance
• High reliability contacts
• Low thermal electromotive force
• Sealed construction allows washing

A 2A 12V DC monostable signal relay that features sensitive, low power coils. The relay is designed for switching low loads and is ideal for use in telecommunications devices, office equipment, alarm systems, medical monitoring devices, AV equipment, control sensors, etc.

• Subminiature package
• Double bifurcated contacts
• Sealed for wave soldering and cleaning
• FCC Part 68 - 1500V - lightning surge
• IP64 Protection

A 1A 12V DC PCB mounting subminiature polarised monostable signal relay that has DPCO contacts and low coil power. Ideal for use in telecommunications devices, office equipment, alarm systems, medical monitoring devices, AV equipment, control sensors, etc.

• PCB Mounting
• Pitch 2.54mm
• Sealed for wave soldering and cleaning
• FCC Part 68 - 1500V - lightning surge
• IP64 Protection

A 1A 5V monostable subminiature signal relay with a sensitive, low power DC coil as well as a light weight construction. Ideal for use in telecommunications devices, domestic appliances, office equipment, etc.

• Choice of coil voltages
• Rated current 1A
• PCB Mounting
• Subminiature package
• Sealed for wave soldering and cleaning
• IP64 Protection

This standard DIL relay is a 3A 5V DC relay with a 2 form C (DPCO or DPDT) contact arrangement. The parameters and features of this relay make it suitable for use in: communications equipment, office equipment, measurement and control gear, entertainment electronics, medical equipment, consumer electronics.

• Standard DIL relay
• Switching and continuous current
• 2 form C contacts (DPCO)
• Immersion cleanable
• Surge voltage resistance meets FCC Part 68
• UL approved

This 5V DC 2A DPCO signal/telecommunications relay is a surface mount device that comes in a 'gull wing' surface mounting package. The slim line 10 x 6mm dimensions along with the 5.65mm low profile and footprint of just 60mm² make this relay ideal for use on PCBs. A rated switching current of 2A, switching voltage of 220V DC/250v AC and switching power of 60W/62.5VA together with other features such as high mechanical shock resistance mean that this relay is perfect for use in applications such as: telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, automotive applications.

• Break before make double pole changeover contacts
• Slim line and low profile
• Polarised
• Surface mounting 'gull wing' package
• Suitable for reflow soldering
• Bifurcated contacts
• High sensitivity gives low nominal power consumption
• High surge capability
• High mechanical shock resistance
• IP67 rated, suitable for immersion cleaning
• Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20, K21, K45
• UL 94V-0 approved

This 12V DC 2A DPCO signal/telecommunications relay is a surface mount device that comes in a 'gull wing' surface mounting package. The slim line 10 x 6mm dimensions along with the 5.65mm low profile and footprint of just 60mm² make this relay ideal for use on PCBs. A rated switching current of 2A, switching voltage of 220V DC/250v AC and switching power of 60W/62.5VA together with other features such as high mechanical shock resistance mean that this relay is perfect for use in applications such as: telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, automotive applications.

• Break before make double pole changeover contacts
• Slim line and low profile
• Polarised
• Surface mounting 'gull wing' package
• Suitable for reflow soldering
• Bifurcated contacts
• High sensitivity gives low nominal power consumption
• High surge capability
• High mechanical shock resistance
• IP67 rated, suitable for immersion cleaning
• Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20, K21, K45
• UL 94V-0 approved

This 24V DC 2A DPCO signal/telecommunications relay is a surface mount device that comes in a 'gull wing' surface mounting package. The slim line 10 x 6mm dimensions along with the 5.65mm low profile and footprint of just 60mm² make this relay ideal for use on PCBs. A rated switching current of 2A, switching voltage of 220V DC/250v AC and switching power of 60W/62.5VA together with other features such as high mechanical shock resistance mean that this relay is perfect for use in applications such as: telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, automotive applications.

• Break before make double pole changeover contacts
• Slim line and low profile
• Polarised
• Surface mounting 'gull wing' package
• Suitable for reflow soldering
• Bifurcated contacts
• High sensitivity gives low nominal power consumption
• High surge capability
• High mechanical shock resistance
• IP67 rated, suitable for immersion cleaning
• Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20, K21, K45
• UL 94V-0 approved