The Finder 26.01.8.024.0000 is a 10A Step Relay Module from the 26 series. This 24V relay has been designed for panel mounting. The relay is 31.5 wide and 28.5 high making it compact for recessed boxes or on chassis. The relay contact is 1 NO (SPST-NO) manufactured from a Cadmium free material.

• Operating voltage: 24V AC
• Switching capacity: Max(AC1) 2500VA/(AC15, 230V) 500VA
• Switching voltage: Max 400V/AC/ 220V DC
• Switching current: 10A
• Protection type: IP20
• Contact material: AgNi
• Max. permanent current: (AC1) 10A/250(V/AC) 450
• Contact type: 1 NO (SPST-NO)
• Switch-on current: Max 20A
• Switching sequence: Step 1 OFF
• Switching sequence: Step 2 ON
• Manufacturer's part: Finder 26.01.8.024.0000

The Finder 26.02.8.230.0000 is a 10A Step Relay Module from the 26 series. This 230V relay has been designed for panel mounting. The relay is 31.5 wide and 28.5 high making it compact for recessed boxes or on chassis. The relay contact is 2 NO (SPST-NO) manufactured from a Cadmium free material.

• Operating voltage: 230V AC
• Switching capacity: Max(AC1) 2500VA/(AC15, 230V) 500VA
• Switching voltage: Max 400V/AC/ 220V DC
• Switching current: 10A
• Protection type: IP20
• Contact material: AgNi
• Max. permanent current: (AC1) 10A/250(V/AC) 450
• Contact type: 1 NO (DPST-NO)
• Switch-on current: Max 20A
• Switching sequence: Step 1 OFF
• Switching sequence: Step 2 ON
• Manufacturer's part: Finder 26.01.8.230.0000

The Finder 26.03.8.230.0000 is a 10A Step Relay Module from the 26 series. This 230V relay has been designed for panel mounting. The relay is 31.5 wide and 28.5 high making it compact for recessed boxes or on chassis. The relay contact is 1NO+1NC (SPST-NO+SPST-NC) manufactured from a Cadmium free material.

• Operating voltage: 230V AC
• Switching capacity: Max(AC1) 2500VA/(AC15, 230V) 500VA
• Switching voltage: Max 400V/AC/ 220V DC
• Switching current: 10A
• Protection type: IP20
• Contact material: AgNi
• Max. permanent current: (AC1) 10A/250(V/AC) 450
• Contact type: 1 NO+1NC (SPST-NO+SPST-NC)
• Switch-on current: Max 20A
• Switching sequence: Step 1 OFF-ON
• Switching sequence: Step 2 ON-OFF
• Manufacturer's part: Finder 26.03.8.230.0000

The Finder 5V Relay DPDT 1A High Sensitivity is identical to the BT51W series but supplied with a more sensitive coil (200mW).

• The relays are fully sealed, telecoms standard
• DIL pins are arranged on a 2.54mm grid
• UL and CSA approved
• Finder 30 series

The Finder 12V Relay DPDT 1A High Sensitivity is identical to the BT51W series but supplied with a more sensitive coil (200mW).

• The relays are fully sealed, telecoms standard
• DIL pins are arranged on a 2.54mm grid
• UL and CSA approved
• Finder 30 series

The Finder 24V Relay DPDT 1A High Sensitivity is identical to the BT51W series but supplied with a more sensitive coil (200mW).

• The relays are fully sealed, telecoms standard
• DIL pins are arranged on a 2.54mm grid
• UL and CSA approved
• Finder 30 series

The Finder 5V Relay DPDT BT47W/5 is a double pole changeover industry standard sealed relay.

• Equivalent to BT Type 47W, indicating acceptance for use on private or public telecommunications equipment
• Hermetically sealed and housed in a flame retardent case
• DIL pins on a 2.54mm pitch grid
• UL and CSA approved

The Finder 12V Relay DPDT DC BT47W/6 is a double pole changeover industry standard sealed relay.

• Equivalent to BT Type 47W, indicating acceptance for use on private or public telecommunications equipment
• Hermetically sealed and housed in a flame retardent case
• DIL pins on a 2.54mm pitch grid
• UL and CSA approved

The Finder 24V Relay DPDT DC BT47W/7 is a double pole changeover industry standard sealed relay.

• Equivalent to BT Type 47W, indicating acceptance for use on private or public telecommunications equipment
• Hermetically sealed and housed in a flame retardent case
• DIL pins on a 2.54mm pitch grid
• UL and CSA approved

The Finder 5V Relay SPDT DC 6A (Miniature) 32.21 is from the Finder series of slim solid state single pole relays.

• PCB mounting
• 1 CO (SPDT), 6A
• 240V AC switching capacity
• Ideal for industrial and commercial applications
• High capacity
• Low power consumption
• Ambient temperature –40°C to +85°C
• 5kV (1.2/50µs) insolation between coil and contacts
• Finder 32.21 series

The Finder 5V Relay SPST DC 6A (Miniature) 32.21 is from the Finder series of slim solid state single pole relays.

• PCB mounting
• 1 CO (SPDT), 6A
• 240V AC switching capacity
• Ideal for industrial and commercial applications
• High capacity
• Low power consumption
• Ambient temperature –40°C to +85°C
• 5kV (1.2/50µs) insolation between coil and contacts
• Finder 32.21 series

The Finder 12V Relay SPST DC 6A (Miniature) 32.21 is from the Finder series of slim solid state single pole relays.

• PCB mounting
• 1 CO (SPDT), 6A
• 240V AC switching capacity
• Ideal for industrial and commercial applications
• High capacity
• Low power consumption
• Ambient temperature –40°C to +85°C
• 5kV (1.2/50µs) insolation between coil and contacts
• Finder 32.21 series

The Finder 12V Relay SPST DC 6A (Miniature) 32.21 is from the Finder series of slim solid state single pole relays.

• PCB mounting
• 1 CO (SPDT), 6A
• 240V AC switching capacity
• Ideal for industrial and commercial applications
• High capacity
• Low power consumption
• Ambient temperature –40°C to +85°C
• 5kV (1.2/50µs) insolation between coil and contacts
• Finder 32.21 series

The Finder 24V Relay SPST DC 6A (Miniature) 32.21 is from the Finder series of slim solid state single pole relays.

• PCB mounting
• 1 CO (SPDT), 6A
• 240V AC switching capacity
• Ideal for industrial and commercial applications
• High capacity
• Low power consumption
• Ambient temperature –40°C to +85°C
• 5kV (1.2/50µs) insolation between coil and contacts
• Finder 32.21 series

The Finder 5V Relay (UltraSlim) SPDT 6A 34.51 is from an industry range of compact, slim single pole changeover relays.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

The Finder 5V Relay (Slim) SPDT 6A 34.51 is from an industry range of compact, slim single pole changeover relays.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

Buy Finder 12V Relay SPDT 6A Ultra Slim (34.51 Series) - a compact, slim single pole changeover relay.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

The Finder 24V Relay (UltraSlim) SPDT 6A 34.51 is from an industry range of compact, slim single pole changeover relays.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

This is a Finder 36.11 series miniature PCB mount 1 CO (SPDT) relay which is rated to carry 10A at 250V AC. The 'sugar cube' packaging measures only 19 x 15.5mm and this is a cadmium free design using silver-tin contacts.

• Contact arrangement 1 CO (SPDT)
• Contact current 10A
• Contact voltage 250V AC
• Coil voltage 5V DC
• Coil power 350mW
• Operating temperature -45 to +85°C
• Finder 36.11 series

This is a Finder 36.11 series miniature PCB mount 1 CO (SPDT) relay which is rated to carry 10A at 250V AC. The 'sugar cube' packaging measures only 19 x 15.5mm and this is a cadmium free design using silver-tin contacts.

• Contact arrangement 1 CO (SPDT)
• Contact current 10A
• Contact voltage 250V AC
• Coil voltage 6V DC
• Coil power 350mW
• Operating temperature -45 to +85°C
• Finder 36.11 series

This is a Finder 36.11 series miniature pcb mount 1 CO (SPDT) relay which is rated to carry 10A at 250V AC. The 'sugar cube' packaging measures only 19 x 15.5mm and this is a cadmium free design using silver-tin contacts.

• Contact arrangement 1 CO (SPDT)
• Contact current 10A
• Contact voltage 250V AC
• Coil voltage 9V DC
• Coil power 350mW
• Operating temperature -45 to +85°C
• Finder 36.11 series

Finder 12V Relay (Miniature) SPDT 10A Series 36.11 - a miniature single pole changeover relay rated at 10A.

• PCB mounting relays housed in a compact 'sugar cube' package
• Sealed to IP67
• 4kV insulation between coil and contacts

This is a Finder 36.11 series miniature PCB mount 1 CO (SPDT) relay which is rated to carry 10A at 250V AC. The 'sugar cube' packaging measures only 19 x 15.5mm and this is a cadmium free design using silver-tin contacts.

• Contact arrangement 1 CO (SPDT)
• Contact current 10A
• Contact voltage 250V AC
• Coil voltage 48V DC
• Coil power 350mW
• Operating temperature -45 to +85°C
• Finder 36.11 series

The Finder 24V Relay (Miniature) SPDT 10A 36.11 is from an industry range of compact, slim single pole changeover relays.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 36.11 series

The Finder 24V Relay 6A Interface Module 38.51 is a high quality 35mm DIN rail mounting relay interface module from Finder.

• Coil indication
• Protection circuit
• Fitted with retaining clip
• ID tab and jumper busbar available

The Finder 12V Relay (Miniature) SPDT 10A DC is a compact, slim single pole changeover relay.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

The Finder 24V Relay (Miniature) SPDT 10A DC is a compact, slim single pole changeover relay.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

The Finder 24V Relay (Miniature) SDPT DC 10A is an industry standard vertical PCB or socket mounted relay.

• Incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.31 series

The Finder 240V Relay (Miniature) SPDT DC 10A is an industry standard vertical PCB or socket mounted relay.

• Incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.31 series

The Finder 6V Relay (Miniature) SDPT DC 10A is an industry standard vertical PCB or socket mounted relay.

• Incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.31 series

The Finder DC DPDT 12V Relay (Miniature) 8A is a standard vertical PCB or socket mounted relay.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

Buy 24V Relay (Miniature) DC DPDT 8A from Finder - a standard vertical PCB or socket mounted relay.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

The Finder 40.52 miniature pcb mount 2CO (DPDT) relay is rated to switch 8A at 250V AC. It's footprint is designed for PCB mounting either directly or in a socket. This version has an AC coil operating at 50 or 60Hz . Relays in this series feature an 8mm gap between coil and contacts which provides 6kV of isolation.

• Contacts 2CO (DPDT)
• Coil voltage 12V AC
• Coil power 1.2VA
• Contact current 8A
• Flux proof to RT II as standard
• Compatible with 95 series sockets
• Compatible with 86 series timer accessories
• Coil EMC suppression
• Finder 40.52 series

The Finder 24V Relay (Miniature) DPDT AC 8A is from a range of industry standard vertical PCB or socket mounted relays.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

The Finder 240V Relay (Miniature) DPDT AC 8A is an industry standard vertical PCB or socket mounted relays.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

The Finder 6V Relay (Miniature) DPDT DC 8A is from a range of industry standard vertical PCB or socket mounted relays.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

The relays meet VDE 0106/T101 (Protective separation between coil and the contacts).

• 5mm Pinning
• Approvals: VDE, UL, CSA, RINA, GOST, FI, IMQ, S, Nemko, Semko, BEAB, B

The relays meet VDE 0106/T101 (Protective separation between coil and the contacts).

• 5mm Pinning
• Approvals: VDE, UL, CSA, RINA, GOST, FI, IMQ, S, Nemko, Semko, BEAB, B

The relays meet VDE 0106/T101 (Protective separation between coil and the contacts).

• 5mm Pinning
• Approvals: VDE, UL, CSA, RINA, GOST, FI, IMQ, S, Nemko, Semko, BEAB, B

The Finder 48V Relay (Miniature) DPDT DC 8A is from a range of industry standard vertical PCB or socket mounted relays.

• The Finder 40.52 series incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.52 series

The Finder 40.52 miniature PCB mount 2CO (DPDT) relay is rated to switch 8A at 250V AC. It's footprint is designed for PCB mounting either directly or in a socket. This version has a standard coil which requires 0.65W compared to the sensitive DC coil which only requires 0.5. Relays in this series feature an 8mm gap between coil and contacts which provides 6kV of isolation.

• Contacts 2CO (DPDT)
• Coil voltage 60V DC
• Coil power 0.65W
• Contact current 8A
• Flux proof to RT II as standard
• Compatible with 95 series sockets
• Compatible with 86 series timer accessories
• Coil EMC suppression
• Finder 40.52 series

The relays meet VDE 0106/T101 (Protective separation between coil and the contacts).

• 5mm Pinning
• Approvals: VDE, UL, CSA, RINA, GOST, FI, IMQ, S, Nemko, Semko, BEAB, B

The Finder 12V Relay (Miniature) SPDT 16A DC is a compact, slim single pole changeover relay.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

A 16A 12V DC miniature PCB relay with SPDT-CO AgCdO contacts and 5mm contact pin spacing.

• Switching voltage 250V AC
• SPDT-CO or SPST-NO contacts
• Choice of contact pin pitch
• DC Sensitive coils as standard
• 8mm Creepage and clearance distances between coil and contacts
• Meets EN 60335-1 glow wire requirements
• Flux proof: RT II standard, (RT III option)
• UL, IMQ approved

A 16A 12V DC miniature PCB relay with SPST-NO AgCdO contacts and 5mm contact pin spacing.

• Switching voltage 250V AC
• SPDT-CO or SPST-NO contacts
• Choice of contact pin pitch
• DC Sensitive coils as standard
• 8mm Creepage and clearance distances between coil and contacts
• Meets EN 60335-1 glow wire requirements
• Flux proof: RT II standard, (RT III option)
• UL, IMQ approved

The Finder 24V Relay (Miniature) SPDT 16A DC is a compact, slim single pole changeover relay.

• Housed in a SIL package
• Ideally suited to high density PCB mounting
• Contacts are rated at 6A with 6kV isolation between coil and contacts
• Sealed to IP50, 8mm creepage and 6mm clearance
• Finder 34.51 series

A 16A 24V DC miniature PCB relay with SPDT-CO AgCdO contacts and 5mm contact pin spacing.

• Switching voltage 250V AC
• SPDT-CO or SPST-NO contacts
• Choice of contact pin pitch
• DC Sensitive coils as standard
• 8mm Creepage and clearance distances between coil and contacts
• Meets EN 60335-1 glow wire requirements
• Flux proof: RT II standard, (RT III option)
• UL, IMQ approved

The relays meet VDE 0106/T101 (Protective separation between coil and the contacts).

• 5mm Pinning
• Approvals: VDE, UL, CSA, RINA, GOST, FI, IMQ, S, Nemko, Semko, BEAB, B

The Finder 240V Relay (Miniature) SDPT DC 16A is an industry standard vertical PCB or socket mounted relay.

• Incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.31 series

The Finder 6V Relay (Miniature) SDPT DC 16A is an industry standard vertical PCB or socket mounted relay.

• Incorporate 8mm isolation gap between coil and contacts as required by VDE0700
• Housed in a dustproof IP40 tinted case (AC versions have an orange tint)
• Widely approved including VDE, BEAB, UL, CSA, SEV, NF-USE, SETI, IMQ, SEMKO and DEMKO
• Finder 40.31 series