An AM receiver from CIC in a TO-92 package which requires very few external components to make a complete radio.

• Low operating voltage – down to 1.3V
• Low quiescent current – 0.2mA

The TDA2030AV is an 18W Hi-Fi audio power amplifier that provides high output current and has very low harmonic and cross-over distortion, further the device incorporates an original short circuit protection system comprising an arrangement for automatically limiting the dissipated power so as to keep the working point of the output transistors within their safe operating area, a conventional thermal shut-down system is also included. Intended for use as a low frequency class AB amplifier.

• Hi-Fi Audio power amplifier
• 18W Output power
• 8R Load impedance
• Class AB amplifier
• 6 to 36V supply voltage
• Pentawatt case

The UTC TDA2822 is a monolithic integrated audio amplifier in a 8-Pin plastic dual in line package. It is designed for portable media players and radios.

• Wide operating supply voltage 1.8 to 12V
• Low crossover distortion
• Low quiescent circuit current
• Bridge/stereo configuration

The TEA2025B/D is a monolithic integrated circuit in a DIL-16 package that is intended for use as dual or bridge power audio amplifier for portable audio equipment and other AV equipment.

• Dual or bridge connection modes
• Minimal external component count
• Supply voltage down to 3V
• High channel separation
• Very low switch On/Off noise
• Maximum gain of 45dB with adjustable external resistor
• Soft clipping
• Thermal protection

The LM380 is a power audio power amplifier for consumer applications. Gain is internally fixed at 34dB. A unique input stage allows inputs to be ground referenced. The output is automatically self-centering to one half the supply voltage. Applications include simple phonograph amplifiers, intercoms, line drivers, teaching machine outputs, alarms, ultrasonic drivers, TV sound systems, AM-FM radio, small servo drivers, power converters, etc.

• 2.5W Output power
• 8R Load impedance
• 10 to 22V Supply voltage
• Working temperature 0°C to +70°C
• DIL-14 Case
• Wide supply voltage range
• Low quiescent power drain
• Voltage gain fixed at 50
• High peak current capability
• Input referenced to GND
• High input impedance
• Low distortion

The LM386N is a low voltage audio power amplifier for consumer applications. Ideal for AM/FM radio amplifiers, portable tape player amplifiers, intercoms, TV sound systems, line drivers, ultrasonic drivers, small servo drivers, power converters, etc.

• 325mW Output power
• 8R Load impedance
• 4 to 12V Supply voltage
• Working temperature 0°C to +70°C
• DIL-8 Case

An audio amplifier with a 1.2W output. Intended for use as low frequency Class B power amplifier in portable radios, cassette recorders and players etc. This IC is a drop-in replacement for the obsolete ST TBA820M.

• 8R Load Impedance
• Class B Amplifier Class
• 3V to 16V Supply Voltage
• Operating temperature -40°C to +150°C
• DIL-8 Case
• Low quiescent current
• Low number of external components required
• Good ripple rejection
• No cross-over distortion
• Low power dissipation

This Unisonic PA2009 J11 pin multiwatt class AB stereo audio amplifier IC, contains two identical amplifiers capable of delivering 10W per channel.

• Supply range 8V ~ 28V
• High power outputs (10W per channel)
• High output current up to 3.5A
• Short circuit protection
• Thermal protection