A PCB mounting coin cell holder for use on equipment where battery replacement may be necessary.

• Holder for non-tagged coin cells
• Cells held in position by positive contact
• Negative terminal in base of holder
• Raised sides holds the cells in place
• For CR1225 size battery
• Takes 2 cells
• PCB pin terminals
• Tin plated phosphor bronze contacts
• PBT body

Rectangular battery holder suitable for CR123A type batteries.

• 1 Cell
• PCB mount
• Can be screwed into position
• Open style

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 2 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 2 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 3 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 3 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 4 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 4 AA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire, switch is rated at 30V and 0.5A Max.

A black ABS panel mounting battery box from Comfortable.

• Holds 6 AA size cells for 9V applications where a 9V PP3 battery would have insufficient capacity
• Cells are accessed by simply unclipping the battery box door
• Box clip-fits into panels approximately 1mm thick and requires a cut-out of approx 60mm x 94mm
• Overall dimensions: 114.5 x 66 x 19mm
• Terminated in 150mm stripped and tinned, red and black 26AWG wires

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 2 AAA batteries
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 2 AAA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 3 AAA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 3 AAA batteries
• Snap-in battery Box
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 4 AAA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long

Enclosed battery box with detachable lid, moulded in black ABS.

• Suitable for 4 AAA batteries
• Lids may be secured with the small screws provided
• Terminated in red and black stranded 26AWG wires approx. 150mm long
• Fitted miniature On/Off switch wired into the black (negative) wire

This battery holder has a slide top for easy access with a firm snap closing action. The internal battery contacts are connected to two 200mm leads terminated with a DC plug.

The top of the box has a simple On/Off slide switch. Dimensions of box: 68 x 33 x 21mm.

• Ideal for projects and backup power applications
• Designed for standard PP3 type 9V battery
• Suppplied in black
• Includes On/Off switch

This battery holder has a slide top for easy access with a firm snap closing action. The internal battery contacts are connected to two steel nickel plated contacts with solder lug terminals for easy and quick connection.

• Ideal for projects and backup power applications
• Designed for standard PP3 type 9V battery
• Supplied in black polycarbonate
• Steel nickel plated contacts with solder lug terminals
• Dimensions: 54(L) x 34(W) x 23(D)mm (not including front)

High quality PCB mounting 24mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for two 24mm diameter cells

High quality PCB mounting 20mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for two 20mm diameter cells

The Keystone PCB Battery Holder AA has been specifically designed to firmly retain AA cylindrical batteries.

• Tinned nickel plated contacts for excellent soldering
• Polarity clearly marked for orientation
• Low profile, space saving
• Moulded from PBT
• UL-94-0 approved

High quality PCB mounting 23mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for single 23mm diameter cell

Low profile PCB mounting holders for CR2032 coin cells.

• Surface-mount version
• Holders have polarised dual-spring contacts to ensure correct polarity and low contact resistance
• Height above PCB 5.5mm
• Keystone type 1060 (surface-mount) available

A high quality PCB mounting holder for a single ½ AA cell without tags e.g. 18-0420.

• PCB battery holder
• 1/2AA size battery
• Takes 1 cell
• PCB pin terminals
• Tin nickel plated steel contact
• -50 to +145°C
• PBT base material
• Approximate battery dimensions 14.5 dia. x 25mm
• Suitable for Duracell PX28L, Panasonic CR14250 etc.
• Keystone part no. 108

A 9V battery holder suitable for PCB mounting.

• Ideal for power source or memory back-up applications
• Excellent spring retention for holding battery in place
• Male and female snap-in terminals assure positive contact and correct polarity
• Withstands severe shock and vibration
• Moulded from high impact glass filled nylon
• PCB pin terminal
• Nickel plated steel contact
• Glass filled nylon body
• 9.7mm long, 4mm wide, 14mm high
• Keystone type 1294

This battery holder from Keystone holds 1 AA battery securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads with male/female snap fasteners

This battery holder from Keystone holds 2 AA batteries securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads with male/female snap fasteners

This battery holder from Keystone holds 3 AA batteries securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads with male/female snap fasteners

This battery holder from Keystone holds 2 AAA batteries securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads and male/female snap fasteners

This battery holder from Keystone holds 4 AA batteries securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads with male/female snap fasteners

This battery holder from Keystone holds 3 AAA batteries securely in place to provide a positive connection and maintain a low contact resistance.

• Contact springs self-adjust to variations in battery length
• Designed to withstand shock and vibration
• Polypropylene holder material
• Supplied with 26AWG tinned red and black 150mm wire leads and male/female snap fasteners

High quality PCB mounting 12mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for single 12mm diameter cell

High quality PCB mounting 12mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for two 12mm diameter cells

High quality PCB mounting 16mm coin cell battery holder from Keystone.

• Suitable for applications where batteries need to be changed when exhausted and desoldering is undesirable
• Cells are held in position by the positive contact and connect with a negative contact in the base of the holder
• Suitable for single 16mm diameter cell

A PCB mounting coin cell holder for use on equipment where battery replacement may be necessary.

• Holder for non-tagged coin cells
• Cell held in position by positive contact
• Negative terminal in base of holder
• Raised sides holds the cell in place
• For CR2430 size battery
• Takes 1 cell
• PCB pin terminals
• Tin plated phosphor bronze contacts
• PBT body

A PCB mounting coin cell holder for use on equipment where battery replacement may be necessary.

• Holder for non-tagged coin cells
• Cell held in position by positive contact
• Negative terminal in base of holder
• Raised sides holds the cell in place
• For CR2032 size battery
• Takes 1 cell
• PCB pin terminals
• Tin plated phosphor bronze contacts
• PBT body