Irwin Jigsaw Metal Cutting blades.

T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws.Fast, straight cuts in aluminum 4-15mm, plastic 4-30mm, non-ferrous metal, metal 4-6mm, fiberglass, lead, tin 4-20mm.

Length: 100mm.Pitch: 6.

Supplied in a pack of 5.

Jigsaw Metal & Wood Cutting Blades made from Bi-Metal which is a highly flexible, tough combination of HSS and HCS which is suitable for the most demanding applications.

HSS and BiMetal progressive tooth blade for all-purpose cutting in wood and metal, whilst also extendeding life. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws.

Progressive tooth spacing for fast cuts, long life in metal 3.5-10mm, wood with nails, particleboard 3.5-90mm, non-ferrous metal, aluminium, plastics 2-30mm

Length: 132mm.Pitch: Progressive.

Supplied in a pack of 5.

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal.

Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel 1.5-3mm, plastic 1.5-30mm, fiberglass 1-20mm.

Length: 100mm.Pitch: 24.

Supplied in a pack of 5.

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal.

Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in).

Length: 92mm.Pitch: 36.

Supplied in a pack of 5.

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, clean cuts in hard and soft wood, particle board 6-60 mm (1/4-2 3/8in).

Length: 100mm.Pitch 6 Fast Cut.

Supplied in a pack of 5.

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Straight cuts in hard and soft wood, plastics, plywood, laminated particle board 4-30 mm (3/16 Inch - 1 1/4 Inch).

Length: 100mm.Pitch: 10 Ordinary Cut.

Supplied in a pack of 5.

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in metal. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 1.5-3 mm (1/16Inch -1/8in).

Length: 92mm. Pitch: 24 Precise Cut.

Supplied in a pack of 5.

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

Universal shank with 3 sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, coarse cuts in hard and soft wood, plastics 5-60 mm (7/32Inch -2 3/8in).

Length: 100mm.Pitch: 8 Fast Cut.

Supplied in packs of 5.

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast straight cuts in hard and soft wood, plastics, particleboard 6-60 mm (1/4Inch -2 3/8in).

Length: 100mm.Pitch 6 Fast Cut.

Supplied in a pack of 5.

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Very fast clean cuts in hard and soft wood, particleboard 6-60 mm (1/4Inch -2 3/8in).

Length: 100mm.Pitch 6 Fast Cut.

Supplied in a pack of 5.

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in thin and thick meta metal. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in).

Length: 92mm. Pitch: 36 Precise Cut.

Supplied in a pack of 5.

Irwin Jigsaw Metal & Wood Cutting blades made from Bi-Metal which is a highly flexible, tough combination of HSS and HCS is suitable for the most demanding applications.

With a universal shank and HSS and BiMetal progressive tooth form, for all-purpose cutting in wood and metal. Progressive tooth spacing for fast cuts, long life in metal 3.5-10mm, wood with nails, particleboard 3.5-90mm, non-ferrous metal, aluminium, plastics 2-30mm.

Length: 132mm.Pitch: Progressive Precise Cut.

Supplied in a pack of 5.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws.

These Irwin 10504410 (T144DP) Wood Jigsaw Blades provide fast, clean, parallel cuts in hard and soft wood, particle board 6-60mm.

These Irwin Jigsaw Blades are carbide tipped for long life and are especially suited for abrasive materials. They are ideal for use on glass fibre reinforced plastics (5-50mm), plasterboard and fibre cement boards (<80mm).

This blade has the following specifications:

Popular Reference: T141HM. Length: 100mm. 6 TPI.

These Irwin Jigsaw Blades are carbide tipped for long life and are especially suited for abrasive materials. They are ideal for use on glass fibre reinforced plastics (5-50mm), plasterboard and fibre cement boards (<80mm).

This blade has the following specifications:

Popular Reference: T341HM. Length: 132mm. 6 TPI.

The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials.

Contain the following pieces:

2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.

A standard T-shank jigsaw blade with ground teeth for very clean and fast cuts.

• Application: hardwood, softwood, plywood and fibre boards up to 70mm, soft plastics up to 40mm
• Material: HCS
• Saw blade length: 132mm
• Specification: Very clean and fast cut. Tapered blade, ground teeth
• Tooth pitch: 6tpi
• Supplied in packs of 5
• RUKO type 321 8024

HCS Blade suitable for cutting through harder woods. Colour-coded bayonet type fitting allows for easy identification. Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastics. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through harder woods.
• Colour-coded bayonet type fitting allows for easy identification.
• Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastics.
• Works with most popular brands of Jigsaws.
• Model No. SJBT101AO

HCS Blade suitable for cutting through harder woods. Colour-coded bayonet type fitting allows for easy identification. Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastic. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through harder woods.
• Colour-coded bayonet type fitting allows for easy identification.
• Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastic.
• Works with most popular brands of Jigsaws.
• Model No. SJBT101B

HCS Blade suitable for cutting through harder woods. Colour-coded bayonet type fitting allows for easy identification. Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastics. Downward cut make this blade ideal for leaving a clean cut on materials such as laminate worktops. Works with most popular brands of jigsaws.

• HCS Blade suitable for cutting through harder woods.
• Colour-coded bayonet type fitting allows for easy identification.
• Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastics.
• Downward cut make this blade ideal for leaving a clean cut on laminate.
• Works with most popular brands of Jigsaws.
• Model No. SJBT101BR

HCS Blade suitable for cutting through harder woods. Colour-coded bayonet type fitting allows for easy identification. Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastic. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through harder woods.
• Colour-coded bayonet type fitting allows for easy identification.
• Ground and taper ground teeth allow for a precise, clean cut into harder woods and plastic.
• Works with most popular brands of Jigsaws.
• Model No. SJBT101D

HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard. Colour-coded bayonet type fitting allows for easy identification. Milled and side set teeth allow for a relatively rough and efficient cut. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled and side set teeth allow for a relatively rough and efficient cut.
• Works with most popular brands of Jigsaws.
• Model No. SJBT111C

HSS Blade suitable for cutting through metals. Multiple teeth pitch on the blade gives a smoother cut in various different thicknesses of metal. Colour-coded bayonet type fitting allows for easy identification. Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium. Works with most popular brands of jigsaws.

• HSS Blade suitable for cutting through metals.
• Multiple teeth pitch on the blade gives a smoother cut in various different thicknesses of metal.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT118A

Bi-Metal blades suitable for cutting through metals. Colour-coded bayonet type fitting allows for easy identification. Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium. Works with most popular brands of jigsaws.

• Bi-Metal blades suitable for cutting through metals.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT118AF

HSS Blade suitable for cutting through metals. Multiple teeth pitch on the blade gives a smoother cut in various different thicknesses of metal. Colour-coded bayonet type fitting allows for easy identification. Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium. Works with most popular brands of jigsaws.

• HSS Blade suitable for cutting through metals.
• Multiple teeth pitch on the blade gives a smoother cut in various different thicknesses of metal.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT118B

Bi-Metal blades suitable for cutting through metals. Colour-coded bayonet type fitting allows for easy identification. Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium. Works with most popular brands of jigsaws.

• Bi-Metal blades suitable for cutting through metals.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled & wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT118BF

HSS Blade suitable for cutting through metals. Colour-coded bayonet type fitting allows for easy identification. Milled and wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium. Works with most popular brands of jigsaws.

• HSS Blade suitable for cutting through metals.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled and wavy set teeth allow for a fine, straight cut into metals such as soft steel and aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT118G

HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard. Flexible blade, which makes it ideal for cutting curves into general wood and other similar materials. Colour-coded bayonet type fitting allows for easy identification. Milled and side set teeth allow for a relatively rough and efficient cut. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard.
• Flexible blade, which makes it ideal for cutting curves into general wood and other similar materials.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled and side set teeth allow for a relatively rough and efficient cut.
• Works with most popular brands of Jigsaws.
• Model No. SJBT119BO

HSS Blade suitable for cutting through metals. Colour-coded bayonet type fitting allows for easy identification. Milled and wavy set teeth allow for a fine, straight cut into aluminium. Works with most popular brands of jigsaws.

• HSS Blade suitable for cutting through metals.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled and wavy set teeth allow for a fine, straight cut into aluminium.
• Works with most popular brands of jigsaws.
• Model No. SJBT127D

HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard. Colour-coded bayonet type fitting allows for easy identification. Milled and side set teeth allow for a relatively rough and efficient cut. Works with most popular brands of Jigsaws.

• HCS Blade suitable for cutting through softer woods such as plywood, chipboard and plasterboard.
• Colour-coded bayonet type fitting allows for easy identification.
• Milled and side set teeth allow for a relatively rough and efficient cut.
• Works with most popular brands of Jigsaws.
• Model No. SJBT144D

The Starrett BU36-5 ;Wood Cutting Jigsaw Blades with Unified Shank™, will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied as a pack of 5.

Specification

Length: 75mm.Width: 7.5mm.Thickness: 1.3mm.TPI: 6.Tooth: Skip.Set: Alternate.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU310-5 Wood Cutting Jigsaw Blades with Unified Shank™, will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied as a pack of 5.

Specification

Length: 75mm.Width: 7.5mm.Thickness: 1.3mm.TPI: 10.Tooth: Ground.Set: Tapered.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU310DT-5 Wood Cutting Jigsaw Blades with Unified Shank™. They will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied as a pack of 5.

Specification

Length: 75mm.Width: 7.5mm.Thickness: 1.3mm.TPI: 10.Tooth: Ground.Set: Tapered, Downstroke Cut.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

Starrett BU214-5 Multi Purpose Jig Saw Blades with Unified Shank™. These blades will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification

Length: 50mm, ;Width: 7.5mm, Thickness: 1mm.TPI: 14.Tooth: Regular, Set: Wavy.Capacity: Non Ferrous Metal: 4.8-6.4mm, Wood: 6-30mm & Plastic: 3-12mm.

Length dimension references the tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU224-5 Metal Cutting Jigsaw Blades with Unified Shank™. These blades will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification

Length: 50mm.Width: 7.5mm.Thickness: 1mm.TPI: 24.Tooth: Regular.Set: Wavy.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU224S-5 Metal Cutting Jigsaw Blades with Unified Shank™, these blades will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification:

Length: 50mmWidth: 4.5mmThickness: 1mmTPI: 24Tooth: ScrollSet: Wavy

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU424-5 ;Metal Cutting Jigsaw Blades with Unified Shank™ will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification

Length: 100mm.Width: 9.5mm.Thickness: 1mm.TPI: 24.Tooth: Regular.Set: Wavy.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

The Starrett BU232-5 Metal Cutting Jigsaw Blades with Unified Shank™. These blades will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification

Length: 50mm.Width: 7.5mm.Thickness: 1mm.TPI: 32.Tooth: Regular.Set: Wavy.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

Tungsten carbide grit edged jigsaw blades.Suitable for cutting ceramics, slate, fibreglass, plastics etc.Ideal for awkward shaped cuts.Black and Decker fitting.

Tungsten carbide grit edged jigsaw blade.Suitable for cutting ceramics, slate, fibreglass, plastics etc.Ideal for awkward shaped cuts.Universal fitting, bayonet type.

Bi-Metal blade suitable for cutting through non-ferrous metals and aluminium. 75mm cutting length. Compatible with most popular brands of saws.

• Bi-Metal blade suitable for cutting through non-ferrous metals and aluminium.
• 75mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT101A

Chrome Vanadium steel blade suitable for cutting through wood and plastics. Clean cutting performance. Diagonal teeth. 75mm cutting length. Compatible with most popular brands of saws.

• Chrome Vanadium steel blade suitable for cutting through wood and plastics.
• Clean cutting performance.
• Diagonal teeth.
• 75mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT101B

Chrome Vanadium steel blade suitable for cutting through wood and plastics. Reverse teeth. 75mm cutting length. Compatible with most popular brands of saws.

• Chrome Vanadium steel blade suitable for cutting through wood and plastics.
• Reverse teeth.
• 75mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT101BR

Chrome Vanadium steel blade suitable for cutting through soft wood and plastics. Side set teeth. 75mm cutting length. Compatible with most popular brands of saws

• Chrome Vanadium steel blade suitable for cutting through soft wood and plastics.
• Side set teeth.
• 75mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT111C

HSS Blade suitable for cutting through metals. Wavy set teeth allow for a fine, straight cut into metals such as steel and sheet metal up to 2mm thick. 55mm cutting length. Compatible with most popular brands of saws.

• HSS Blade suitable for cutting through metals.
• Wavy set teeth allow for a fine, straight cut into metals such as steel and sheet metal up to 2mm thick.
• 55mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT118A

HSS Blade suitable for cutting through non-ferrous metals and aluminium. Wavy set teeth allow for a fine, straight cut into metals. 55mm cutting length. Compatible with most popular brands of saws.

• HSS Blade suitable for cutting through non-ferrous metals and aluminium.
• Wavy set teeth allow for a fine, straight cut into metals
• 55mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT118B

Bi-metal blade suitable for cutting through metals. Wavy set teeth allow for a fine, straight cut into metals such as aluminium, non-ferrous metals and stainless steel up to 3mm thick. 55mm cutting length. Compatible with most popular brands of saws.

• Bi-metal blade suitable for cutting through metals.
• Wavy set teeth allow for a fine, straight cut into metals such as aluminium, non-ferrous metals and stainless steel up to 3mm thick.
• 55mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT118BF

Chrome Vanadium steel blade suitable for quick cutting through wood. Side set and diagonal teeth. 75mm cutting length. Compatible with most popular brands of saws.

• Chrome Vanadium steel blade suitable for quick cutting through wood.
• Side set and diagonal teeth.
• 75mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT144D

Chrome Vanadium steel blade suitable for cutting through wood and plastics. Diagonal teeth. 90mm cutting length. Compatible with most popular brands of saws.

• Chrome Vanadium steel blade suitable for cutting through wood and plastics.
• Diagonal teeth.
• 90mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT301CD

Bi-Metal blade suitable for cutting through stainless steel up to 2mm thick. Wavy set teeth allow for a fine, straight cut into metals. 105mm cutting length. Compatible with most popular brands of saws.

• Bi-Metal blade suitable for cutting through stainless steel up to 2mm thick.
• Wavy set teeth allow for a fine, straight cut into metals.
• 105mm Cutting length.
• Compatible with most popular brands of saws.
• Model No. WJT318A