MoTip Sport Cycling Chain Spray Lubricant with ceramic particles to treat chains and gear wheels of bikes. It has a very low friction factor for minimal resistance, maintaining the outstanding lubricating properties, even at heavy load. Prevents wear and reduces the adhesion of dirt. It is also water-repellent and resistant to weather influences.

Extremely suitable for chains and gear wheels of racing, cross and mountain bikes. For heavy circumstances we advise to use MoTip Cycling Chain Spray Ultra.

1 x MoTip Sport Cycling Chain Spray Lubricant 200ml

Durable construction with chrome plated steel upright tube. Dial type high pressure gauge with rotating bezel. Gauge calibrated in psi and bar with ranges from 0-160psi and 0-11bar. Fitted with twin head for both Presta and Schrader valves and a 360° rotatable hose.

Features a wide base for added stability with foldable foot stand. Supplied with accessories for inflating items such as small inflatable boats, air beds and balls stored in a compartment located in the handle.

Heavy-duty 10.5mm square link chain, fitted with durable nylon sleeve for avoiding accidental scratching and damage to the bike. Features hardened zinc alloy bodied disc lock with anti-drill, anti-saw and anti-pick protection on the locking cylinder. 4* ART Approval. Supplied with two keys.

Features hardened locking pin and impact resistant die cast body. Visible bright colour acts as a reminder that the unit is attached to the bike. Supplied with two keys and storage pouch.

Mini air compressor with delivery of 25L/min. Air output hose features quick release coupling. Suitable for inflating tyres on cars. Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

• Air Delivery: 25L/min.
• Typical Inflation Time: 0-30psi in 139sec (175/70/R13).
• 1.5m Air hose with quick release coupling and 3m power cord with accessory plug.
• Suitable for inflating tyres on cars.
• Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.
• Model No. MAC04

Mini air compressor with delivery of 50L/min. Air output hose features quick release coupling. Suitable for inflating tyres on lawnmowers, motorcycles, cars and vans. Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

• Air Delivery: 50L/min.
• Typical Inflation Time: 0-30psi in 104sec (175/70/R13).
• 4.5m Air hose with quick release coupling and 3m power cord with clamps.
• Suitable for inflating tyres on lawnmowers, motorcycles, cars and vans.
• Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.
• Model No. MAC05

Mini air compressor with delivery of 75L/min. Air output hose features quick release coupling. Suitable for inflating tyres on cars, vans, and 4x4s. Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

• Air Delivery: 75L/min.
• Typical Inflation Time: 0-30psi in 60sec (175/70/R13).
• 7.5m Air hose with quick release coupling and 3m power cord with clamps.
• Suitable for inflating tyres on cars, vans and 4x4s.
• Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.
• Model No. MAC06

Mini air compressor with delivery of 95L/min. Air output hose features quick release coupling. Suitable for inflating tyres on cars, vans, 4x4s and commercial vehicles. Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

• Air Delivery: 95L/min.
• Typical Inflation Time: 0-30psi in 45sec (175/70/R13).
• 7.5m Air hose with quick release coupling and 3m power cord with clamps.
• Suitable for inflating tyres on cars, vans, 4x4s and commercial vehicles.
• Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.
• Model No. MAC07

Emergency kit includes 12V compressor, 450ml sealant bottle, accessories for inflatables, instructions and zipped storage bag fitted with hook-and-loop fastening for smart storage. Can seal a puncture up to Ø6mm at the roadside in under 10 minutes. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Very simple-to-use kit requires no tools, no need to remove the valve core and is TPMS safe. Plugs into a 12V vehicle accessory socket. Replacement sealant bottle available - Sealey Model No. MAC10SR. Suitable for cars, vans and 4x4s.

• Emergency kit includes 12V compressor, 450ml sealant bottle, accessories for inflatables, instructions and zipped storage bag fitted with hook-and-loop fastening for smart storage.
• Can seal a puncture up to Ø6mm at the roadside in under 10 minutes.
• Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair.
• Very simple-to-use kit requires no tools, no need to remove the valve core and is TPMS safe.
• Plugs into a 12V vehicle accessory socket.
• Replacement sealant bottle available - Sealey Model No. MAC10SR.
• Suitable for cars, vans and 4x4s.
• Maximum Pressure: 100psi.
• Model No. MACR10S

Heavy-duty hardened steel bolt-down anchor, supplied with all fixings. Provides a secure locking point for items such as motorcycles, bicycles, boats, caravans and trailers.

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector. 90° Angled connector for the difficult to reach valves.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push-button quick release.
• Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector.
• 90° Angled connector for the difficult to reach valves.
• Model No. PCL6A

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose. 90° Angled connector for the difficult to reach valves.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push-button quick release.
• Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.
• 90° Angled connector for the difficult to reach valves.
• Model No. PCL6AT

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector. 90° Angled connector for the difficult to reach valves.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push-button quick release.
• Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector.
• Model No. PCL6S

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push-button quick release.
• Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.
• Model No. PCL6ST

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose. 90° Angled connector for the difficult to reach valves.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push-button quick release.
• Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.
• 90° Angled connector for the difficult to reach valves.
• Model No. PCL8A

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
• Simple but effective thumb push button quick release.
• Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.
• Model No. PCL8S

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 0.5m flexible hose fitted with 240mm twin push-on air connector. Supplied with a serial numbered calibration certificate. Three year guarantee.

• Manufactured to comply with EN 12645.
• Aluminium body with rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• 0.5m Flexible hose fitted with 240mm twin push-on air connector.
• Range: 0-9.6bar(0-140psi).
• Supplied with a serial numbered calibration certificate.
• Three year guarantee.
• Model No. SA37/93B

Die cast aluminium body with large rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 2.5m Flexible hose fitted with twin lock-on air connector. Supplied with a serial numbered calibration certificate.

• Manufactured to comply with EN 12645.
• Aluminium body with rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• Fitted with 2.5m hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres.
• Range: 0-9.6bar(0-140psi).
• Supplied with a serial numbered calibration certificate.
• 2 Year guarantee*.
• Model No. SA37/95

Anodised black aluminium body with impact absorbing rubber bumper. Features auto power on/power off backlit LCD digital display for ease of use. Calibrated in psi, bar and kPa. 0.5m flexible hose fitted with 240mm twin push-on air connector. Features a battery level indicator, powered by 2 x AAA batteries (supplied). Supplied with a serial numbered calibration certificate. 3 Year guarantee.

• Anodised black aluminium body with impact absorbing rubber bumper.
• Auto power on/off backlit LCD digital display.
• Calibrated in psi, bar and kPa.
• 0.5m Flexible hose fitted with 240mm twin push-on air connector.
• Range: 0.3-17.2bar(4-250psi).
• Supplied with a serial numbered calibration certificate.
• Features a battery level indictor.
• Powered by 2 x AAA batteries (supplied).
• 3 Year guarantee.
• Model No. SA37/96B

Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95.

• Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose.
• Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95.
• Model No. SA37/C

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 0.5m Flexible hose fitted with 240mm, twin push-on air connector.

• Manufactured to comply with EN 12645.
• Aluminium body with rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• 0.5m Flexible hose fitted with 240mm, twin push-on air connector.
• Range: 0-9.5bar(0-138psi).
• Model No. SA371

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 2.7m Flexible hose fitted with 240mm clip-on air connector.

• Manufactured to comply with EN 12645.
• Aluminium body with rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• 2.7m Flexible hose fitted with 240mm clip-on air connector.
• Range: 0-9.5bar(0-138psi).
• Model No. SA372

Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. Auto power off after 8 seconds and auto power on once pressure is sensed, or air inflation starts. 0.5m Flexible hose fitted with 240mm push-on air connector.

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.
• Auto power off after 8 seconds and auto power on once pressure is sensed, or air inflation starts.
• 0.5m Flexible hose fitted with 240mm push-on air connector.
• Model No. SA374

Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. Auto power off after 8 seconds and auto power on once pressure is sensed, or air inflation starts. 2.7m Flexible hose fitted with clip-on air connector.

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.
• Auto power off after 8 seconds and auto power on once pressure is sensed, or air inflation starts.
• 2.7m Flexible hose fitted with clip-on air connector.
• Model No. SA375

Robust, high reliability and modern design which is lightweight and space-saving. Touch screen technology with human touch recognition software. Electronic pressure set with additional four button memory function. Three modes, inflate, deflate and over pressure setting (OPS) – which allows operator to set the machine to automatically seat the bead on new tyres whilst getting on with alternative work. The inclusion of the nitrogen (N2) purge facility allows the unit to increase the effectiveness of this increasingly popular tyre service. Red flashing light, flashing screen and audio signal for end of cycle. Auto-start Inflation. Ceramic sensor gives guaranteed accuracy to ± 0.5% of full scale reading even with hoses up to 50m in length. 21mm Backlit transflective LCD gives a clear easy to read display. Supplied with a wall bracket, 5m hose with new patented design clip-on connector and 3-pin plug.

• Robust, high reliability and modern design which is lightweight and space-saving.
• Touch screen technology with human touch recognition software.
• Electronic pressure preset with additional four button memory function.
• Three modes - inflate, deflate and over pressure setting (OPS) - for automated bead seating.
• Nitrogen (N2) purge capability.
• Red flashing light, flashing screen and audio signal for end of cycle.
• Auto-start Inflation.
• Ceramic sensor gives guaranteed accuracy to ± 0.5% of full scale reading even with hose up to 50m in length.
• 21mm Backlit transflective LCD gives a clear easy-to-read display.
• Supplied with a wall bracket, 5m hose with new patented design PCL clip-on connector and 3-pin plug.
• 2 Year guarantee*.
• Model No. SA390

Die-cast body and dial type gauge with rubber protector. Features a glow in the dark measuring scale. Displayed in psi and bar. Fitted with 500mm rubber hose and single clip-on connector.

• Die-cast body and dial type gauge with rubber protector.
• Features a glow in the dark measuring scale.
• Displayed in psi and bar.
• Range: 0-7bar(0-100psi).
• Fitted with 500mm rubber hose and single clip-on connector.
• Inlet Size: 1/4"BSP.
• Model No. SA399

Die-cast body and digital type gauge with rubber protector. Displayed in psi, bar, kpa and kg/cm². Fitted with 500mm rubber hose and single clip-on connector. Supplied with 2 x AAA batteries.

• Die-cast body and digital type gauge with rubber protector.
• Displayed in psi, bar, kPa and kg/cm².
• Range: 0-17bar(0-250psi).
• Display Type: backlit LCD.
• Fitted with 500mm rubber hose and single clip-on connector.
• Batteries: 2 x AAA (supplied).
• Inlet Size: 1/4"BSP.
• Model No. SA400

Composite 3ft board fitted with 2m of 7-core cable and 12V N-type plug. Includes two E-Approved reflectors and two 4-function lamp clusters (stop, tail, indicator and number plate illumination light). Important: Standard trailer boards should not be used in conjunction with cycle carriers.

Squire Security Cable is 1800mm long with looped ends. The cable is octagonal and is recommended to be used with a suitable Squire 'D' lock.

Length: 1800mm.Diameter: 12mm.

Squire Toughlok Lock & Chain Set offers excellent value for money. The chain, like the higher specification Squire chains, is hardened, so it is still a good choice for securing valuables. The chain is recommended for securing items within sheds when combined with a Squire wall or ground anchor.

It is also recommended for securing garden furniture, barbeques, tool, and storage areas. As this chain is lighter than others in the Squire range, it is particularly suitable where the chain needs to be carried, for example, if used for locking a bicycle.

Specification:

Length: 900mm.Diameter: 5mm. Chain and Shackle Material: hardened mild steel.Lock Width: 38mm.Mechanism: 4-pin tumbler.Keyed-alike.

Security chain only. For securing bulky items complete with sleeve to help protect from scratches.

Chain length: 900mm.Link diameter: 6.5mm.Chain material: hardened mild steel.

Type: CP36PR.

Security chain only. For securing bulky items complete with sleeve to help protect from scratches.

Chain length: 1200mm.Link diameter: 6.5mm.Chain material: hardened mild steel.

Type: CP48PR.

Squire G3 Round Section Hard Boron Alloy Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests.

This range has achieved Silver, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported.

Size: 900 x 10mm.

Squire G4 High Security Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests.

This range has achieved Gold, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported.

Length: 1200mm.Diameter: 10mm.

Squire J3 Round Section Hard Boron Alloy Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests.

This range has achieved Silver, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported.

Size: 900 x 8mm.

Hardened steel chains with diameters ranging from 8mm to 10mm. The range covers applications that require a low, medium or high security chain. Larger diameter chains use an extended end link that allows the small end link to pass through allowing a higher security closed shackle padlock to be used.Square section.

Size 900 x 8mm

Hardened steel chains with diameters ranging from 8mm to 10mm. The range covers applications that require a low, medium or high security chain. Larger diameter chains use an extended end link that allows the small end link to pass through allowing a higher security closed shackle padlock to be used.Square section.

Size 900 x 10mm

Hardened steel chains with diameters ranging from 8mm to 10mm. The range covers applications that require a low, medium or high security chain. Larger diameter chains use an extended end link that allows the small end link to pass through allowing a higher security closed shackle padlock to be used.Square section.

Size 1200 x 10mm