This LINIAN 1LERPB Earth Rod Pro Bit with carbide tip is designed for use with the LINIAN Earth Rod Pro Drivers as an innovative method for installing earth rods.

Combined with the Pro Driver, this carbide bit converts your earth rod into a SDS drill bit. Using a drill, the earth rod can now be installed into the ground within minutes.

The Carbide tip of this bit also removes the requirement for luck during this operation, the Earth Rod Pro can drill through any rock or debris that crosses its path.

For use with:

• LINIAN 1LERPD Earth Rod Pro Driver (SDS+) or
• LINIAN 1LERPM Earth Rod Pro MAX Driver (SDS Max)

This LINIAN 1LERPD Earth Rod Pro Driver is designed for use with the LINIAN Earth Rod Pro Bit as an innovative method for installing earth rods.

Combined with the Pro Bit, this driver converts your earth rod into a SDS drill bit. Using a drill, the earth rod can now be installed into the ground within minutes.

The Carbide tip of the Pro Bit also removes the requirement for luck during this operation, the Earth Rod Pro can drill through any rock or debris that crosses its path.

For use with:

• LINIAN 1LERPB Earth Rod Pro Bit with Carbide Tip

This LINIAN 1LERPM Earth Rod Pro MAX Driver is designed for use with the LINIAN Earth Rod Pro Bit as an innovative method for installing earth rods.

Combined with the Pro Bit, this driver converts your earth rod into a SDS drill bit. Using a drill, the earth rod can now be installed into the ground within minutes.

The Carbide tip of the Pro Bit also removes the requirement for luck during this operation, the Earth Rod Pro can drill through any rock or debris that crosses its path.

For use with:

• LINIAN 1LERPB Earth Rod Pro Bit with Carbide Tip

A copper-clad rod, suitable for providing a local Earthing point for electric vehicle chargers and other electrical equipment.

The rod allows any fault current generated to be safely conducted to ground.

• Diameter: 3/8in.
• Length: 4ft.
• Copper thickness: 0.25mm
• Offers excellent corrosion resistance
• High tensile strength for driving into ground
• Approved to BS7430

A split Earth rod clamp for 3/8in. rods.

Use this UniStrand 8 Way Earth Terminal Block to connect up to 16 Earth wires.

• Material: nickel-plated brass
• Takes 16mm & 25mm conductors
• Nickel-plated slotted screws

A copper-clad rod, suitable for providing a local Earthing point for electric vehicle chargers and other electrical equipment.

The rod allows any fault current generated to be safely conducted to ground.

• Diameter: 5/8in.
• Length: 4ft.
• Can be extended by adding another rod with a coupler (not included)
• Copper thickness: 0.25mm
• Offers excellent corrosion resistance
• High tensile strength for driving into ground
• Approved to BS7430

Use this UniStrand 5/8in. Earth Rod Coupler to join two 5/8in. rods.

• Coupler for Earth rod, 28-4772

Use this UniStrand 5/8in. Earth Rod Driving Stud to prevent damage to the end of the Earth rod when driving it into the ground.

• Prevents damage to Earth rod during installation

A split Earth rod clamp for 5/8in. rods.

Use this UniStrand 4 Way Earth Terminal Block to connect up to 8 Earth wires.

• Material: nickel-plated brass
• Takes 16mm & 25mm conductors
• Nickel-plated slotted screws

A green box with cable gland for secure connections to an Earth Rod.

• Box size: 106 x 106 x 67mm
• Earth rod/cable entry: 7 to 10.5mm