A 0.5mm conical bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 10

Replacement Bit, 2.3mm Tip, Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For use with ANTEX XS 25W Soldering Irons

Replacement Bit, 2.3mm Tip, They have been Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, For Use Exclusively on ANTEX XS 25W Soldering Irons, Antex 50 Series

Replacement Bit, 3mm Tip, Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For use with ANTEX XS 25W Soldering Irons

Replacement Bit, 3mm Tip, They have been Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Suitable for use with ANTEX XS 25W Soldering Irons, Antex 50 Series

Replacement Bit, 4.7mm Tip, Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For use with ANTEX XS 25W Soldering Irons

The Antex 2.3mm Bit for XS Iron is suitable for the Antex XS range of soldering irons.

• Bits are held in place by an internal spring

The Antex 3mm Bit for XS Iron is suitable for the Antex XS range of soldering irons.

• Bits are held in place by an internal spring

Replacement Bit, 0.5mm Tip, Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For use with ANTEX XS 25W Soldering Irons

Replacement Bit, 0.5mm Tip, They have been Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For Use Exclusively on ANTEX XS 25W Soldering Irons

Replacement Bit, 1mm Tip, Specifically Designed to Match the Power Output of the Heating Element, Antex Replacement Bits are Manufactured from High-grade Copper, Plated First with Iron and Then Chrome to Give a Long Working Life, Antex 50 Series, For use with ANTEX XS 25W Soldering Irons

The Antex 0.12mm Bit for XS Iron is suitable for the Antex XS range of soldering irons.

• Bits are held in place by an internal spring

A 2.3mm chisel bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 102

A 4.0mm chisel bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 103

A 4.7mm chisel bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 104

A 1.0mm chisel bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 106

A 0.12mm conical bit suitable for use with Antex model M, C and TC25 soldering irons.

• Antex No. 107

A 2.3mm chisel bit suitable for use with Antex model M, C, G and TC25 soldering irons.

• Antex No. 820

A 3.0mm chisel bit suitable for use with Antex model M, C, G and TC25 soldering irons.

• Antex No. 821

Replacement bit with 2.3mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 2.3mm long life tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station
• Extra plated to increase protection from the more aggressive fluxes used with lead-free solder

Replacement bit with 3mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 3.2mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station
• Extra plated to increase protection from the more aggressive fluxes used with lead-free solder

Replacement bit with 4.7mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 6mm tip from Antex suitable for use with ANTEX CS, and TCS soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits are held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 0.5mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits are held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 0.5mm long life tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station
• Extra plated to increase protection from the more aggressive fluxes used with lead-free solder

Replacement bit with 1mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits are held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 0.12mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 3mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits are held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

Replacement bit with 5mm tip from Antex suitable for use with ANTEX CS, TCS, TC50, SD50, XSTC, A245, A545, A718 soldering irons. Manufactured from high-grade copper, plated first with iron and then chrome to give a long working life.

• Bits are held in place by an internal spring
• Bits for the CS and TCS also fit the Antex TC50 and SD50 irons and the 660TC station

A 0.6mm pointed longlife tip for the Anvil AV-SI25W, AV-SI30W and AV-SI40W mains powered soldering irons.

• Fits Anvil 25, 30 & 40W mains irons
• Approximate length: 70mm
• Approximate diameter: 4mm
• Anvil type AV-B11

A 2mm screwdriver chisel longlife tip for the Anvil AV-SI25W, AV-SI30W and AV-SI40W mains powered soldering irons.

• Fits Anvil 25, 30 & 40W mains irons
• Approximate length: 70mm
• Approximate diameter: 4mm
• Anvil type AV-B12

A 3.8mm 45° chisel longlife tip for the Anvil AV-SI25W, AV-SI30W and AV-SI40W mains powered soldering irons.

• Fits Anvil 25, 30 & 40W mains irons
• Approximate length: 70mm
• Approximate diameter: 4mm
• Anvil type AV-B13

A 5.5mm 45° chisel longlife tip for the Anvil AV-SI60W mains powered soldering iron.

• Fits the Anvil 60W mains iron
• Approximate length: 70mm
• Approximate diameter: 6mm
• Anvil type AV-B33

A spare or replacement soldering tip for the Anvil AV-A48W Adjustable Temperature Analogue Soldering Station, 85-5900, the Anvil AV-A48WK Adjustable Temperature Analogue Soldering Station Kit, 85-5914, and the Anvil AV-ANS48W Analogue Soldering Station 85-5987.

• Conical
• 1.5mm tip
• Anvil type AV-C11

A spare or replacement soldering tip for the Anvil AV-A48W Adjustable Temperature Analogue Soldering Station, 85-5900, the Anvil AV-A48WK Adjustable Temperature Analogue Soldering Station Kit, 85-5914, and the Anvil AV-ANS48W Analogue Soldering Station 85-5987.

• Conical
• 0.5mm tip
• Anvil type AV-C12

A spare or replacement soldering tip for the Anvil AV-A48W Adjustable Temperature Analogue Soldering Station, 85-5900, the Anvil AV-A48WK Adjustable Temperature Analogue Soldering Station Kit, 85-5914, and the Anvil AV-ANS48W Analogue Soldering Station 85-5987.

• Chisel
• 3mm tip
• Anvil type AV-C13

A spare or replacement soldering tip for the Anvil AV-A48W Adjustable Temperature Analogue Soldering Station, 85-5900, the Anvil AV-A48WK Adjustable Temperature Analogue Soldering Station Kit, 85-5914, and the Anvil AV-ANS48W Analogue Soldering Station 85-5987.

• Chisel
• 2mm tip
• Anvil type AV-C14

A spare or replacement soldering tip for the Anvil 48W ESD safe digital soldering station, 85-5912.

• Conical
• 0.5mm tip

A 1.5mm pointed longlife tip for the Anvil AV-AN48W 48W Analogue Soldering Station.

• 1.5mm, pointed
• Length approx. 55mm
• Body diameter approx. 7mm
• Anvil type AV-N216

A 0.5mm pointed longlife tip for the Anvil AV-AN48W 48W Analogue Soldering Station.

• 0.5mm, pointed
• Length approx. 55mm
• Body diameter approx. 7mm
• Anvil type AV-N226

A 3mm 45° chisel longlife tip for the Anvil AV-AN48W 48W Analogue Soldering Station.

• 3mm, 45° chisel
• Length approx. 55mm
• Body diameter approx. 7mm
• Anvil type AV-N236

A 2mm, screwdriver chisel longlife tip for the Anvil AV-AN48W 48W Analogue Soldering Station.

• 2mm, screwdriver chisel
• Length approx. 55mm
• Body diameter approx. 7mm
• Anvil type AV-N246

A spare or replacement soldering tip for the Anvil 48W ESD safe digital soldering station, 85-5912.

• Conical
• 0.3mm tip

A spare or replacement soldering tip for the Anvil 48W ESD safe digital soldering station, 85-5912.

• Chisel
• 3.0mm

A spare or replacement soldering tip for the Anvil 48W ESD safe digital soldering station, 85-5912.

• Screwdriver
• 2.0mm

A high quality 0.8mm chisel soldering tip for use with Atten ST-60, ST-80, AT938D and AT980E soldering irons and soldering stations.

• Atten 900M-T-0.8

A high quality 1.2mm chisel soldering tip for use with Atten ST-60, ST-80, AT938D and AT980E soldering irons and soldering stations.

• Atten 900M-T-1.2

A high quality 2.4mm chisel soldering tip for use with Atten ST-60, ST-80, AT938D and AT980E soldering irons and soldering stations.

• Atten 900M-T-2.4