The Metcal BVX-101 is a single user, PRE-HEPA-GAS volume extraction system designed to be used directly on the workbench. The unit is designed with an innovative adaptor which allows the user to choose between plenum or arm extraction options.
Portable, single user fume extraction system
Low noise unit
No external ducting or compressor needed
Unit easily fits on any bench-top or under-bench
300mm wide (12in.) plenum
Innovative adaptor transforms the plenum into an arm
Powerful 85m3/hr-airflow rate
Immediate extraction of fumes, particles and vapours
Two filtration configurations: heavy soldering and light dust or light duty organic solvent and adhesive applications
Bi-coloured LED light indicates when the filters are blocked and require replacing
The Weller FT 12 fume extraction unit operates from a clean and oil-free compressed air supply. The vacuum is generated by a maintenance-free compressed air converter. The contaminated air is purified by a pre-filter and main filter system. A compressed air cleaning filter removes additional odours caused by the compressed air. This highly efficient filter system makes the FT 12 a genuine air recovery system.
Weller FE (Fume Extraction) soldering irons are connected directly to the unit – additional leads are not required.
Maintenance-free compressed air converter
Ideal for long term industrial use
Up to 2 FE soldering irons can be connected
High stability against overturning
An air cleaning filter removes odours from the compressed air
In all applications where laser tools are being used, particles and gases are emitted. These emissions are hazardous to health and can also settle on, or contaminate the work piece and work area. The use of a Weller fume filter extraction system can prevent this from happening.
The WellerFT Laserline LL 200 V filter system is made from high-quality components and has been specifically developed to extract hazardous emissions right at the source. Its innovative filter system separates fine dust and gases in three stages and only returns completely cleaned air into the work area.
Extraction unit for laser marking, engraving and welding applications with low to medium dust volumes
230V / 50 Hz operation
Constant flow control (CFC) guarantees automatic air flow regulation independent of the filter pollution level
In all applications where laser tools are being used, particles and gases are emitted. These emissions are hazardous to health and can also settle on, or contaminate the work piece and work area. The use of a Weller fume filter extraction system can prevent this from happening.
The WellerFT Laserline LL 400 V filter system is made from high-quality components and has been specifically developed to extract hazardous emissions right at the source. Its innovative filter system separates fine dust and gases in three stages and only returns completely cleaned air into the work area.
Laser extraction unit for laser marking, grinding, cutting and welding with high dust levels
230V, 50Hz operation
Electronic filter control with optical and acoustic 'filter full' alarm
Constant flow control (CFC) guarantees optimal air flow regulation independent of the filter pollution level
Efficiency test via USB port
Intake fittings (50mm, 75mm or 100mm diameter) available separately
The WellerFT Zero-Smog 2 produces more suction force than its predecessor and is powerful enough to remove all types of fumes from the work bench. It can produce 190m³/h suction volume and offers a high extraction power of 3000Pa even with a used filter in place.
The performance increase is provided by a high-quality, reliable, long-life, maintenance-free brushless EC blower. In combination with flexible and adjustable 'Easy-Click 60' arms, the Zero Smog 2 unit is the ideal solution for smaller, cost-conscious soldering applications for 1 to 2 work benches.
Portable fume extraction unit with 1x extraction hose and funnel nozzle
Designed for placing under or next to bench-top
Quick and simple installation with 'Easy-Click' System
Economic unit purifies air for 1 to 2 workplaces
Large EPA E12 filter surface of 2.4m² For long filter lifetime
Main filter with EPA E12 efficiency of 99.5% at MPPS
Activated carbon filter to remove additional gaseous pollutants
Easy filter change
Supplied complete with:
Flexible extraction arm OF15, 1.5m, Ø60mm
Funnel nozzle ALFA (225 x 100mm)
Fixing clamp
Replacement filters, additional extraction arms and parts are available separately
The Weller Zero Smog TL is a fume extraction unit for 1 to 2 workplaces. The portable unit is designed to be placed under, or next to, the bench. Installation is quick and simple using Weller's user-friendly Easy-Click system.
The fume extractor uses a granular activated-carbon filter for effective fume extraction. It has a long service life due to the exceptionally large filter surface of 2.4m². The fine dust pre-filter F7, can be changed separately, without having to change the main filter. Filter changes are quick and easy and the automated filter-change notification system alerts the user of the need to change the filter.
The extractor has a variable speed setting and an exceptionally long service life due to its maintenance-free brushless EC turbine.
Fume extraction unit Zero Smog TL
Low noise level
Automated filter change notification system
Easy operation
Easy filter replacement
Longer service life due to exceptionally large filter surface
The Weller Zero Smog TL fume extractor kit 1 FN is a fume extraction unit for 1 to 2 workplaces. The portable unit is designed to be placed under, or next to, the bench. Installation is quick and simple using Weller's user-friendly Easy-Click system.
The kit includes the Zero Smog TL fume extraction unit, OF10 flexible extraction arm, 3 metre extraction hose, stop valve with bench mounting brackets, ZSRS remote switch and ALFA funnel nozzle.
The fume extractor uses a granular activated-carbon filter for effective fume extraction. It has a long service life due to the exceptionally large filter surface of 2.4m². The fine dust pre-filter F7, can be changed separately, without having to change the main filter. Filter changes are quick and easy and the automated filter-change notification system alerts the user of the need to change the filter.
The extractor has a variable speed setting and an exceptionally long service life due to its maintenance-free brushless EC turbine.
Fume extraction unit Zero Smog TL
Low noise level
Automated filter change notification system
Easy operation
Easy filter replacement
Longer service life due to exceptionally large filter surface
The Weller Zero Smog TL fume extractor kit 1 FN is a fume extraction unit for 1 to 2 workplaces. The portable unit is designed to be placed under, or next to, the bench. Installation is quick and simple using Weller's user-friendly Easy-Click system.
The kit includes the Zero Smog TL fume extraction unit, OF10 flexible extraction arm, 3 metre extraction hose, stop valve with bench mounting brackets, ZSRS remote switch and ALFA funnel nozzle.
The fume extractor uses a granular activated-carbon filter for effective fume extraction. It has a long service life due to the exceptionally large filter surface of 2.4m². The fine dust pre-filter F7, can be changed separately, without having to change the main filter. Filter changes are quick and easy and the automated filter-change notification system alerts the user of the need to change the filter.
The extractor has a variable speed setting and an exceptionally long service life due to its maintenance-free brushless EC turbine.
The Weller Zero Smog TL fume extractor kit 2 SN is a fume extraction unit for 1 to 2 workplaces. The portable unit is designed to be placed under, or next to, the bench. Installation is quick and simple using Weller's user-friendly Easy-Click system.
The kit includes the Zero Smog TL fume extraction unit, 2x OF15 flexible extraction arms, 2x arm fixing clamps, 2x FT-NL sloped nozzles and a ZSRS remote switch.
The fume extractor uses a granular activated-carbon filter for effective fume extraction. It has a long service life due to the exceptionally large filter surface of 2.4m². The fine dust pre-filter F7, can be changed separately, without having to change the main filter. Filter changes are quick and easy and the automated filter-change notification system alerts the user of the need to change the filter.
The extractor has a variable speed setting and an exceptionally long service life due to its maintenance-free brushless EC turbine.
The Weller Zero Smog TL fume extractor kit 2 FN is a fume extraction unit for 1 to 2 workplaces. The portable unit is designed to be placed under, or next to, the bench. Installation is quick and simple using Weller's user-friendly Easy-Click system.
The kit includes the Zero Smog TL fume extraction unit, 2x OF15 flexible extraction arms, 2x arm fixing clamps, 2x ALFA funnel nozzles and a ZSRS remote switch.
The fume extractor uses a granular activated-carbon filter for effective fume extraction. It has a long service life due to the exceptionally large filter surface of 2.4m². The fine dust pre-filter F7, can be changed separately, without having to change the main filter. Filter changes are quick and easy and the automated filter-change notification system alerts the user of the need to change the filter.
The extractor has a variable speed setting and an exceptionally long service life due to its maintenance-free brushless EC turbine.
In all applications where laser tools are being used, particles and gases are emitted. These emissions are hazardous to health and can also settle on, or contaminate the work piece and work area. The use of a Weller fume filter extraction system can prevent this from happening.
The WellerFT Laserline LL 150 filter system is made from high-quality components and has been specifically developed to extract hazardous emissions right at the source. Its innovative filter system separates fine dust and gases in three stages and only returns completely cleaned air into the work area.
Efficient laser extraction unit for low volumes of dust
The Weller WFE P is a line-voltage fume extraction unit designed to run with one or two FE (Fume Extraction) soldering irons. It uses an electric, long-life, soundproofed vacuum pump to produce the required vacuum – it does not need a compressed air supply.
The vacuum pump has two power settings which can be selected by means of rocker switches depending on the number of FE soldering irons connected to the unit, saving energy when used with only one iron. The motor is maintenance-free and has a thermal over-load cut-out for protection.
FE soldering irons are connected directly to the unit – additional leads are not required.
230V / 50Hz operation
Up to 2 FE soldering irons can be connected
Electric vacuum pump produces the required vacuum
2 power stages for higher extraction performance with 2 FE soldering irons
Portable unit for stand-alone applications
The motor is maintenance-free and has thermal over-load protection
Filter lift system allows fast and convenient main filter replacement
The Weller WFE fume extraction unit operates from a clean and oil-free compressed air supply. The vacuum is generated by a maintenance-free compressed air converter. The contaminated air is purified by a pre-filter and main filter system. A compressed air cleaning filter removes additional odours caused by the compressed air. This highly efficient filter system makes the WFE a genuine air recovery system.
Weller FE (Fume Extraction) soldering irons are connected directly to the unit – additional leads are not required.
Maintenance-free compressed air converter
Also requires 230V / 50Hz supply
Ideal for long term industrial use
Up to 2 FE soldering irons can be connected
High stability against overturning
An air cleaning filter removes odours from the compressed air
The Weller Zero Smog 4V is a mobile fume extraction unit for volume extraction. It is easy to operate and is designed for use as a small central system providing sufficient extraction for up to 4 workplaces.
Its powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230m³/h. A constant flow control adjusts the turbine speed, avoiding unnecessary waste of suction power and saving energy.
ESD safe
Sufficient for up to 4 workplaces
Constant Flow Control (CFC) adjusts air flow according to number of connected workplaces
Electronic 'filter full' control with audible and visual alarm
The Weller Zero Smog 4V Kit 1 Funnel is a mobile fume extraction unit for volume extraction. The kit includes the Zero Smog 4V fume extraction unit and 1 Easy-Click 60 flexible extraction arm with funnel and stop valve.
It is easy to operate and is designed for use as a small central system providing sufficient extraction for up to 4 workplaces. Its powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230m³/h. A constant flow control adjusts the turbine speed, avoiding unnecessary waste of suction power and saving energy.
ESD safe
Sufficient for up to 4 workplaces
Constant Flow Control (CFC) adjusts air flow according to number of connected workplaces
Electronic 'filter full' control with audible and visual alarm
Efficiency test via USB port
4 wheels allow easy movement of the unit
Low noise level
Supplied with compact filter and fine dust filter
Weller type Zero Smog 4V Kit 1 Funnel, T0053662699N
The Weller Zero Smog 4V Kit 1 Nozzle is a mobile fume extraction unit for volume extraction. The kit includes the Zero Smog 4V fume extraction unit and 1 Easy-Click 60 flexible extraction arm with sloped nozzle and stop valve.
It is easy to operate and is designed for use as a small central system providing sufficient extraction for up to 4 workplaces. Its powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230m³/h. A constant flow control adjusts the turbine speed, avoiding unnecessary waste of suction power and saving energy.
ESD safe
Sufficient for up to 4 workplaces
Constant Flow Control (CFC) adjusts air flow according to number of connected workplaces
Electronic 'filter full' control with audible and visual alarm
Efficiency test via USB port
4 wheels allow easy movement of the unit
Low noise level
Supplied with compact filter and fine dust filter
Weller type Zero Smog 4V Kit 1 Nozzle, T0053663699N
The Weller Zero Smog 4V Kit 2 Funnel is a mobile fume extraction unit for volume extraction. The kit includes the Zero Smog 4V fume extraction unit and 2 Easy-Click 60 flexible extraction arms with funnel and stop valve.
It is easy to operate and is designed for use as a small central system providing sufficient extraction for up to 4 workplaces. Its powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230m³/h. A constant flow control adjusts the turbine speed, avoiding unnecessary waste of suction power and saving energy.
ESD safe
Sufficient for up to 4 workplaces
Constant Flow Control (CFC) adjusts air flow according to number of connected workplaces
Electronic 'filter full' control with audible and visual alarm
Efficiency test via USB port
4 wheels allow easy movement of the unit
Low noise level
Supplied with compact filter and fine dust filter
Weller type Zero Smog 4V Kit 2 Funnel, T0053664699N
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.