The Anvil AV-RJCT is a low-cost, easy to use hand tool suitable for crimping RJ11 and RJ12 series connectors commonly used in data communications.

• Incorporates cable cutter, cable stripper and crimper
• Handle opening spring and locking mechanism
• Overall length 190mm
• Anvil type AV-RJCT

A professional quality, lightweight aluminium-framed ratchet crimping plier for use with a range of quick-change jaws, suitable for a wide range of crimp connectors.

• Lightweight aluminium crimp plier body
• Jaws change quickly without tools
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Jaws supplied separately

Fully interchangeable with Crimp Tool Sets 86-4500 and 86-4502.

Please see Technical Specification for details of the range of jaws

A professional quality, carbon steel-framed ratchet crimping plier fitted with removable jaws suitable for insulated terminals.

• Carbon steel crimp plier body
• Removable jaws
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Please see Technical Specification for details of suitable connectors
• Anvil type AV-CRMPA

A professional quality, carbon steel-framed ratchet crimping plier fitted with removable jaws suitable for open barrel terminals.

• Carbon steel crimp plier body
• Removable jaws
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Please see Technical Specification for details of suitable connectors
• Anvil type AV-CRMPC1

A professional quality, carbon steel-framed ratchet crimping plier fitted with removable jaws suitable for cord end terminals and bootlace ferrules.

• Carbon steel crimp plier body
• Removable jaws
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Please see Technical Specification for details of suitable connectors
• Anvil type AV-CRMPD

A professional quality, carbon steel-framed ratchet crimping plier fitted with removable jaws suitable for RG 58, etc., coaxial cable connectors.

• Carbon steel crimp plier body
• Removable jaws
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Please see Technical Specification for details of suitable connectors
• Anvil type AV-CRMPE

A professional quality, carbon steel-framed ratchet crimping plier fitted with removable jaws suitable for RG 174 etc., coaxial cable connectors.

• Carbon steel crimp plier body
• Removable jaws
• Ratchet mechanism ensures accurate and complete crimping
• Plastic handles with rubberised grip areas
• Please see Technical Specification for details of suitable connectors
• Anvil type AV-CRMPE5

A professional quality 7-piece crimping set consisting of a ratchet crimping plier and 6 sets of interchangeable jaws for different types of crimp connectors.

The set is housed in a sturdy blow-moulded case for easy and secure storage.

• Crimps Insulated Terminals, Non-Insulated Terminals, Open Barrel Terminals, Bootlace Ferrules, D-Sub Terminals, etc.
• Jaws change quickly without tools
• Ratchet mechanism ensures accurate and complete crimping
• Carbon steel crimp plier body
• Plastic handles with rubberised grip areas
• Zinc phosphate finish on jaws
• Case dimensions 280 x 195 x 50mm

The Anvil AV-CT is a compact crimping tool for crimping red, blue and yellow insulated crimp connectors.

• Crimps red (1.5mm), blue (2.5mm) and yellow (6mm) insulated crimps
• Also includes:
• Wire cutter
• Stripper for 0.75 to 6mm² insulated wire
• Bolt cutter M2.6 to M5
• Position for crimping ignition terminals
• Overall length 200mm
• Anvil type AV-CT

A professional quality, quick-change jaw for use with ratchet crimping pliers, 86-4504 and 86-4506

• Crimps open barrel terminals
• Jaws change quickly without tools
• Zinc phosphate finish

Fully interchangeable with Crimp Tool Sets 86-4500 and 86-4502.

Please see Technical Specification for details of the range of jaws and compatibility with connectors

A professional quality, quick-change jaw for use with ratchet crimping pliers, 86-4504 and 86-4506

• Crimps RG type coaxial connectors
• Jaws change quickly without tools
• Zinc phosphate finish

Fully interchangeable with Crimp Tool Sets 86-4500 and 86-4502.

Please see Technical Specification for details of the range of jaws and compatibility with connectors

A professional quality, quick-change jaw for use with ratchet crimping pliers, 86-4504 and 86-4506

• Crimps RG type coaxial connectors
• Jaws change quickly without tools
• Zinc phosphate finish

Please see Technical Specification for details of the range of jaws and compatibility with connectors

A professional quality, quick-change jaw for use with ratchet crimping pliers, 86-4504 and 86-4506

• Crimps 8-position, 8-contact RJ45 connectors
• Jaws change quickly without tools
• Zinc phosphate finish

Please see Technical Specification for details of the range of jaws and compatibility with connectors

The Anvil AV-IDCCT, IDC Connector Crimping Tool is a hand-operated tool that produces a parallel crimping action to ensure accurate fitting of Insulation Displacement Connectors (IDC) to flat ribbon cable.

• Squeezing the tool produces parallel action to fit IDC connectors to ribbon cable
• Manufactured from pressed steel with PVC handles
• Overall length 240mm (9.5in.)
• Max. connector width 55mm
• Crimping distance 6 to 27.5mm
• Double-sided jaw adaptor for connectors up to 6mm and up to 10mm height
• Anvil type AV-IDCCT

The Anvil AV-RJ-45CT is a low-cost, easy to use hand tool suitable for crimping RJ-45 series (FCC 68) connectors commonly used in data communications.

• Incorporates a cable cutter, cable stripper and crimping tool
• Comfortable plastic handles
• Jaw locking mechanism
• Overall length 205mm
• Anvil type AV-RJ45CT

A 339-piece kit containing a crimping tool with two exchangeable die sets and a wide range of superseal waterproof connectors ideal for automotive applications.

The H2 die set crimps wires from 0.35 to 0.5 and 1.5mm² (22 to 20 and 16 AWG) and the H3 die set crimps 0.75 and 1.0mm² wires (18 and 17 AWG).

The crimping tool has adjustable return spring tension and a quick-release lever. The dies simply push-fit for easy changing.

• Handy divided storage case keeps all parts separate and easy to find
• Crimp tool
• 2 easy change die sets
• Superseal crimp contacts, seals and housings
• Anvil type AV-SACKIT

The Anvil AV-TCT is a crimp tool for non-insulated terminals from 28 to 14 AWG.

• 5 crimp positions covering 28 to 14 AWG
• Cable cross section 0.08 to 2.08mm²
• Cable diameter 0.32 to 1.63mm
• Comfortable plastic handles
• Built-in cable cutter
• Overall length 180mm
• Anvil type AV-TCT

This crimp tool from Bernstein is suitable for crimping insulated and uninsulated terminals.

• Black insulated handles
• Length 230mm
• Manufacturer's part 3-0856

Crimping pliers for the crimping of boot lace ferrules to wire sized between 0.25 and 2.5mm2. Made from hardened and tempered high alloy carbon steel for a long life, the pliers are matt chrome plated for corrosion protection and feature contoured grips with anti-slip horns for comfort and safety.

Crimping pliers for the crimping of boot lace ferrules to wire sized between 0.5 and 16mm2. Made from hardened and tempered high alloy carbon steel for a long life, the pliers are matt chrome plated for corrosion protection and feature contoured grips with anti-slip horns for comfort and safety.

Designed for the safe and secure attachment of modular plugs without die changes. The C.K ratchet crimping pliers feature: Heavy duty body construction with hardened steel jaws - guaranteed for up to 30,000 cycles. Factory set crimp pressures for the optimum connection safety. Built in wire stripper/cutter mechanism. Full cycle ratchet mechanism for safe, repeatable results and comfortable ergonomic handles. Suitable for plugs type 4P2C, 4P4C, 6P4C (RJ11), 6P6C (RJ12), 8P8C (RJ45) and 6P6C/ Offset (Dec)

Non-ratchet action, specially hardened steel crimper with soft comfort grips. Ideal tool for occasional use when preparing electrical connections Total length: 300 mm

Designed for the safe and secure crimping of BNC/TNC connectors to coaxial cable. The C.K ratchet crimping pliers feature: Heavy duty body construction with hardened steel jaws - guaranteed for up to 30,000 cycles. Factory set crimp pressures for the optimum connection safety. Full cycle ratchet mechanism for safe, repeatable results and comfortable ergonomic handles. Suitable for type 58, 59, 62, 8X, 140, 141, 174, 210, 223, 303 and 400.

These CK Tools T3671A Ratchet Crimping Pliers are designed for the safe and secure crimping of Solar PV cable connectors.

The auto-stop ratchet system releases when correct pressure is applied to ensure precise crimping.

Capacity MC3 and MC4 2.5 - 6mm² / 14 - 10 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 250 mm

Compact crimping tool from C.K Tools suitable for crimping 6 and 8-position modular connectors including RJ11 and RJ45 connectors.

• Cuts and strips CAT3, CAT5e and flat cables
• Compact ergonomic design for convenient storage and handling
• Precision engineered crimping dies ensure secure termination
• Heavy duty carbon steel body for strength and durability
• Overall length 140mm
• Manufacturer's part T3673

These CK Tools T3676A Ratchet Crimping Pliers are designed for the safe and secure crimping of bell mouth ferrules.

The auto-stop ratchet system releases when correct pressure is applied to ensure precise crimping.

Capacity 6 - 25mm² / 10 - 4 AWG

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 365 mm

These CK Tools T3680A Ratchet Crimping Pliers are designed for the safe and secure crimping of green, red, and blue insulated terminals.

Also suitable for green, red and blue butt and parallel splicers.

Capacity 0.25 - 2.50mm² / 24 - 14 AWG

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 210 mm

These CK Tools T3681A Ratchet Crimping Pliers are designed for the safe and secure crimping of Modular Plugs 4P, 6P and 8P.

Built in wire stripper and cutters for convenience.

Capacity 8P8C (RJ45), 6P6C (RJ12), 6P4C (RJ11), 6P6C/Offset (Dec), 4P4C and 4P4C.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 210 mm

These CK Tools T3682A Ratchet Crimping Pliers are designed for the safe and secure crimping of red, blue and yellow insulated terminals.

Also suitable for red, blue and yellow butt and parallel splicers.

Capacity 0.5 - 6.0mm² / 20 - 10 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 250 mm

These CK Tools T3683A Ratchet Crimping Pliers are designed for the safe and secure crimping of large bootlace ferrules.

Capacity 10 - 25mm² / 8 - 3 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 250 mm

These CK Tools T3684 Ratchet Crimping Pliers are designed for the safe and secure crimping of medium bootlace ferrules.

Capacity 0.25 - 6mm² / 20 - 10 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 210 mm

These CK Tools T3692A Ratchet Crimping Pliers are designed for the safe and secure crimping of small bootlace ferrules.

Capacity 0.14 - 2.5mm² / 26 - 14 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 210 mm

These CK Tools T3697A Ratchet Crimping Pliers are designed for the safe and secure crimping of uninsulated terminals.

Capacity 1.0 - 10mm² / 16 - 8 AWG.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 250 mm

These CK Tools T3698A Ratchet Crimping Pliers are designed for the safe and secure crimping of COAX - BNC and TNC connectors.

Capacity 1.0, 1.69, 2.0, 3.25, 4.52, and 6.48mm | 0.039", 0.067", 0.078", 0.128", 0.178", and 0.255".

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• For use with BNC and TNC connectors
• Total length: 250 mm

These CK Tools T3698A Ratchet Crimping Pliers are designed for the safe and secure crimping of Modular Plus 6P and 8P.

Capacity 8P8C (RJ45), 6P6C (RJ12) and 6P4C (RJ11).

• Built in wire stripper and cutters for convenience
• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 190 mm

These CK Tools T3853 Ratchet Crimping Pliers are designed for the safe and secure crimping of Modular Plugs 8P.

Capacity 8P8C (RJ45) Cuts, strips, crimps and trims pass through modular plugs, fast and efficiently.

• Auto-stop ratchet system
• High compression pressure for secure crimping
• Precision engineered dies for quality crimps and safe connections
• Dies manufactured from fully hardened carbon alloy steel for strength and durability
• Heavy duty construction, tested up to 40,000 cycles
• Ergonomic two component handle for ease and comfort in use
• Total length: 190 mm

Heavy gauge carbon steel hardened, tempered and chemically blacked. Moulded grip handles. Display packed.

• Crimping insulated terminals size: 1.5mm² (red), 2.5mm² (blue) and 6.0mm² (yellow)
• Crimping non-insulated terminals size: 1.5mm², 2.5mm², 4.0mm² and 6.0mm²
• Wire stripping: 0.75, 1.0, 1.5, 2.5, 4.0 and 6.0mm²
• Shears bolts size: 2.6, 3.0, 3.5, 4.0 and 5.0mm
• Wire cutting

Heavy gauge carbon steel hardened, tempered and chemically blacked. Moulded grip handles. Display packed.

• Crimping insulated terminals size: 1.5mm² (red), 2.5mm² (blue) and 6.0mm² (yellow)
• Crimping ignition terminals
• Wire cutting
• Wire stripping: 0.75, 1.0, 1.5, 2.5, 4.0 and 6.0mm²
• Shears bolts size: 2.6, 3.0, 3.5, 4.0 and 5.0mm.

Heavy gauge carbon steel hardened, tempered and chemically blacked. Moulded grip handles. Packed in plastic storage case. Display packed.

• Crimping insulated terminals size: 1.5mm² (red), 2.5mm² (blue) and 6.0mm² (yellow)
• Crimping non-insulated terminals size: 1.5mm², 2.5mm² 4.0mm² and 6.0mm²
• Wire stripping: 0.75, 1.0, 1.5, 2.5, 4.0 and 6.0mm²
• Shears bolts size: 2.6, 3.0, 3.5, 4.0 and 5.0mm
• Wire cutting
• Assortment of approximately 60 insulated and 40 non insulated crimp terminals.

Assorted terminals in an 18 division plastic storage box. Display packed.

• 10 each of RF2-4M, RF2-5, RF1.25-5, RF1.25-3, RF2-3, YF1.25-3, YF1.25-5, YF2-4, BF1.25 and BF2
• 7 each of YF2-5, YL25-7A, V1.25-7B, Y2-7A and V2-7B
• 5 each of RF5.5-5, RF5.5-6 and BF5.5

Assorted terminals for making solderless electrical connections. All terminals are colour coded. Display packed.

• 10 of V2
• 6 of V-125
• 4 each of MF125-7A, MF2-7A, V5.5, F2BS and F5.5B
• 2 each of BF1.25, BG2, BF5.5, F1.25A, F5.5B, F1.25B and F2B

Designed specifically for crimping ScotchLok° terminals used in the electronic, telecommunications and the automotive industries. For crimping and Seating UG, UR, and UY connectors. Manufactured from carbon steel, oil hardened and tempered with smoothly ground jaws. Fitted with a spring between the handles for extra control. Display packed.

Essential when replacing or repairing automotive/marine battery cables, this tool provides secure crimping when used in conjunction with a hammer or vice. Manufactured from laminated and hardened steel. Display packed.

Expert Quality, carbon steel with hardened and tempered jaws. Continuous crimping at preset tension ensures accurate crimp. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows:- red channel: 0.5-1.00mm², blue channel: 1.5-2.5mm² and yellow channel: 4.0-6.0mm². Display packed.

Expert Quality, carbon steel hardened and tempered with chemically blacked finish for corrosion protection. For crimping RJ45, keyed and non-keyed modular plugs. PVC cushion grip handles for operator comfort. Display packed.

Expert Quality, carbon steel hardened and tempered with chemically blacked finish for corrosion protection. For crimping F connectors to BNC, TNC, RG6, RG58, R58, RG59 and RG62 co-axial cable. Hex. die sizes .068, .100, .213, .256 and .324". PVC cushion grip handles for operator comfort. Display packed.

Expert Quality, carbon steel with hardened and tempered jaws. Continuous crimping at preset tension ensures accurate crimp. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows:- red channel: 0.5-1.00mm², blue channel: 1.5-2.5mm² and yellow channel: 4.0-6.0mm². Supplied complete with 590 (approx.) mixed pre-insulated terminals in a steel storage case with insert. Display packed.

Expert Quality, drop forged from chrome vanadium steel hardened, tempered and chemically blacked for corrosion protection. For crimping cable ferrules in most automotive and electrical applications. Crimping stations; 0.5, 0.75, 1.0, 1.5, 2.5, 4.0, 6.0, 10.0 and 16.0mm². Moulded grip handles. Display packed.

Expert Quality, drop forged from chrome vanadium steel hardened, tempered and chemically blacked for corrosion protection. For crimping bootlace type terminals on most automotive and electrical applications. Crimping stations; 0.25/0.34, 0.5, 0.75, 1.0, 1.5 and 2.5mm². Tool includes a cable cutter. Moulded grip handles. Display packed.

Expert Quality, made from carbon steel, Supplied with two sets of interchangeable hardened and tempered jaws. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows: - red channel: 0.5 - 1.00mm, blue channel: 1.5 - 2.5mm and yellow channel: 4.0 - 6.0mm, and non - insulated crimps 1.5, 2.5, 6 and 10mm. Display packed.