For use with all Draper Inverter/Welders. 2.5M 16mm welding cable with trailing dinse-type plug and 200A crocodile earth clamp fitted. Packed in polythene bag.

Multi - purpose machine suitable for experienced and DIY users alike. Features: Continuous regulation of welding current, Direct fit earth clamp and electrode holder Supplied with face mask and combined chipping hammer/wire brush. Carton packed.

• Output amperage range 40 - 100A
• Phase Single 230V
• Input current 16A
• Duty cycle 10% @ 100A
• Electrode size 1.6mm - 3.2mm
• Dimensions 470 x 270 x 320mm
• Weight 15kg

Multi - purpose machine suitable for experienced and DIY users alike. Features: Continuous regulation of welding current, Thermal overload protection, Direct fit earth clamp and electrode holder. Supplied with face mask and combined hammer/wire brush.

• Output amperage range 50 - 130A
• Phase Single 230V
• Input current 16A
• Duty cycle 10% @ 130A
• Electrode size 2.0 - 3.2mm
• Dimensions 470 x 270 x 320mm
• Weight 18kg

A Tig welding torch suitable for use with all Draper Inverter/Welders.

• Accessories for these torches are available separately
• Draper type 57096

The Draper 1/16" Collet Body for Inverter Welder Tig Torch W623.

Multi - purpose machine Supplied with 1.5M earth clamp, 1.5M welding torch, welding brush and welding mask.Features: Continuous regulation of welding current, Internal cooling fan, Automatic thermal overload protection, Direct fit earth clamp and electrode holder

• Output amperage range 60 - 160A
• Phase Single 230V
• Input current 16A
• Duty cycle 10% @ 160A
• Electrode size 1.6mm - 4.0mm
• Dimensions 470 x 240 x 320mm
• Weight 14kg

Expert Quality, multi purpose welder fitted with microprocessor - controlled inverter technology. This technology enables features like hot start, anti - stick device and thermal overload protection. Supplied complete with MIG torch, TIG torch, MMA electrode holder, earth clamp, welding mask and chipping hammer/brush.Features: Microprocessor - controlled inverter technology TIG DC welding MIG welding MMA welding

• Output amperage range 20 - 200A
• Input current 16A
• Duty cycle 20% @ 200A
• Mig welding wire sizes 0.6 and 0.8mm
• MMA/ARC electrode sizes 1.5 - 4.0mm
• Dimensions 580 x 245 x 360mm
• Weight 14.08kg

Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc). Suitable for arc welding a variety of rods including rutile, basic and stainless. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Switchable between MIG, TIG* or MMA* welding modes (*optional extra torches required). Thermal overload protection which automatically switches off when it exceeds maximum temperature. Fully functional front panel with self explanatory pictograms for each dial and switch. Wire feed control for adjusting speed of wire fed through the torch during welding. Polarity change terminals allow for MIG or flux-cored welding. Includes 3m MIG torch, earth cable, gas hose, regulator and contact tips.

Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Fully functional LCD front panel with easy to follow assisted set up. First, select type of welding, you will be advised the gas mixture and polarity recommended. Input electrode or wire thickness, completing the set up with the material thickness, you are then ready to start welding. Up to four set ups can be saved on the machine for fast loading. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc). Suitable for arc welding a variety of rods including rutile, basic and stainless. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Switchable between MIG, TIG* or MMA* welding modes (*optional extra torches required). Thermal overload warning tells you to switch off when it exceeds maximum temperature. Wire feed control for adjusting speed of wire fed through the torch during welding. Polarity change terminals allow for MIG or flux-cored welding. Includes 3m MIG torch, earth cable, gas hose, regulator and contact tips.

• Pressed steel outer casing.
• Fully functional LCD front panel with easy to follow assisted set up.
• Up to four set ups can be saved on the machine for fast loading.
• Suitable for arc welding a variety of rods including rutile, basic and stainless from Ø1.6 to Ø4mm.
• Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys.
• 3-in-1 Welder, switch between MIG, TIG* and MMA* welding modes (*optional extra torches required).
• Wire feed speed control.
• Allows change of polarity of welding torch depending on MIG or flux-cored welding.
• Includes 3m MIG torch, 3m earth cable, gas hose and regulator.
• Contact Tips: 0.6, 0.8, 0.9, 1mm.
• Model No. INVMIG200LCD

Inverter power supply fitted with plasma cutter control circuitry. Features digital Amp display and two LEDs on the front panel indicating overload and mains power. Supplied with a 4.6m plasma torch, 2m earth cable, 2m gas hose and regulator. Ideal for cutting steel, stainless steel, galvanized steel, aluminium, copper and brass. IP21S Rated.

• Inverter power supply fitted with plasma cutter control circuitry.
• Features digital Amp display and two LEDs on the front panel indicating overload and mains power.
• Supplied with a 4.6m plasma torch, 2m earth cable, 2m gas hose and regulator.
• Ideal for cutting steel, stainless steel, galvanized steel, aluminium, copper and brass.
• Max. Cutting Thickness: 11mm.
• Weight: 9.4kg.
• IP21S Rated.
• Model No. PP40E

Features an integral compressor yet weighs only 18.5kg. Inverter power supply fitted with plasma cutter control circuitry. With built-in 4m plasma torch, earth cable and 4m gas hose. Features an LED display for the current output and dial adjustment from 15-40A. Three indication lights show voltage input, amps output & thermal overload. Uses air to strike arc making it suitable for use near electrical equipment. Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass. IP21S Rated.

• Features an integral compressor yet weighs only 18.5kg.
• Inverter power supply fitted with plasma cutter control circuitry.
• With built-in 4m plasma torch, earth cable and 4m gas hose.
• Features LED Display to show the current output and dial adjustment from 15-40Amp.
• Three indication lights show voltage input, amps output and thermal overload.
• Uses air to strike arc making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• IP21S Rated.
• 230V Supply.
• Model No. PP40PLUS

Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features quick release switch on the torch for control of gas, saving on consumption. Features hot start, anti-stick, forced air cooling, thermal cut-out protection. Suitable for arc welding using the lift start method. Supplied with MMA/TIG Accessories. Optional MMA Electrode Holder: Model No. MMA01.

• Fan-cooled DC power supply for TIG and arc welding applications.
• Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance.
• Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician.
• Features quick release switch on the torch for control of gas, saving on consumption.
• Features hot start, anti-stick, forced air cooling, thermal cut-out protection.
• Suitable for arc welding using the lift start method.
• Supplied with MMA/TIG Accessories.
• Duty Cycle: 20% @ 130A, 60% @ 75A, 100% @ 60A.
• Weight: 4.7kg.
• Optional MMA Electrode Holder: MMA01.
• Model No. TIG130

Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features quick release switch on the torch for control of gas, saving on consumption. Features hot start, anti-stick, forced air cooling, thermal cut-out protection. Suitable for arc welding using the lift start method. Supplied with MMA/TIG Accessories. Optional MMA Electrode Holder: Model No. MMA01

• Fan-cooled DC power supply for TIG and arc welding applications.
• Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance.
• Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician.
• Features quick release switch on the torch for control of gas, saving on consumption.
• Features hot start, anti-stick, forced air cooling, thermal cut-out protection.
• Suitable for arc welding using the lift start method.
• Supplied with MMA/TIG Accessories.
• Duty Cycle: 20% @ 160A, 60% @ 90A, 100% @ 70A.
• Weight: 5.35kg.
• Optional MMA Electrode Holder: MMA01
• Model No. TIG160

Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Digital display enables user to quickly determine which mode has been selected. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features lift and high frequency starts enabling operations to start smoothly and efficiently, along with two or four touch start modes. TIG cycle features pulse TIG which includes post gas and current down-slope regulation. Supplied with TIG Accessories. Optional MMA Electrode Holder: MMA01

Fan-cooled AC/DC power supply for pulse TIG and MMA welding applications. Suitable for welding aluminium, magnesium, stainless steel, steel, copper, nickel and titanium. TIG cycle includes post gas and current down-slope regulation. Features regulated high frequency (HF) push-button arc that prevents having to touch the workpiece to start, keeping the tip in good condition for longer. Includes connector for foot pedal when more control is required.

• Fan-cooled AC/DC power supply for pulse TIG and MMA welding applications.
• Suitable for welding aluminium, magnesium, stainless steel, steel, copper, nickel and titanium.
• TIG cycle includes post gas and current down-slope regulation.
• Features regulated high frequency (HF) push-button arc that prevents having to touch the workpiece to start, keeping the tip in good condition for longer.
• Includes connector for foot pedal when more control is required. Foot pedal available as an optional accessory (Model No. TIG200HFACDCF).
• Model No. TIG200HFACDC

Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Digital display enables user to quickly determine which mode has been selected. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features lift and high frequency starts enabling operations to start smoothly and efficiently, along with two or four touch start modes. TIG cycle features pulse TIG which includes post gas and current down-slope regulation. Supplied with MMA/TIG Accessories. Optional MMA Electrode Holder: MMA01