This handy organiser from ForgeFix includes a full range of ForgeFast wood screws with Pozi compatible heads supplied in an elegant case for easy storage and portability.

Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for interior use

Organised supplied with the following screws: 150 x 3.5 x 16mm, 100 x 3.5 x 25mm, 180 x 3.5 x 30mm, 130 x 4 x 25mm, 140 x 4 x 30mm, 100 x 4 x 40mm, 80 x 4 x 50mm, 55 x 5 x 50mm, 65 x 5 x 80mm, 5 x Pozi compatible bits.

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3 x 12mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP312Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3 x 16mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP316Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3 x 20mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP320Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3 x 25mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP325Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP330Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 16mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3516Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 20mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3520Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 25mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3525Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3530Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 1600
• Manufacturer's part FFP3530YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3540Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 3.5 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP3550Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 16mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP416Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 20mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP420Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 20mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 1800
• Manufacturer's part FFP420YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 25mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP425Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 25mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 1600
• Manufacturer's part FFP425YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP430Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 1400
• Manufacturer's part FFP430YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 35mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP435Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP440Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 1200
• Manufacturer's part FFP440YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 45mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP445Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP450Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 900
• Manufacturer's part FFP450YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 60mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP460Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 60mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 700
• Manufacturer's part FFP460YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 70mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP470Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4 x 70mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 600
• Manufacturer's part FFP470YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP4530Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP4540Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP4550Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 60mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP4560Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 70mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP4570Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 4.5 x 80mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP4580Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 100mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP5100Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 100mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 300
• Manufacturer's part FFP5100YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 120mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP5120Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 25mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP525Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 30mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP530Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP540Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 40mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 800
• Manufacturer's part FFP540YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 200
• Manufacturer's part FFP550Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 50mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 600
• Manufacturer's part FFP550YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 60mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP560Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 60mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 500
• Manufacturer's part FFP560YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 70mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP570Y

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 70mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in tub of 450
• Manufacturer's part FFP570YT

These ForgeFast wood screws from ForgeFix have Pozidriv compatible heads and are available in a wide range of sizes. Each screw has 6 underhead lobes for improved countersinking and reduced surface dust, and a reinforced countersunk neck to improve holding power.

The thread is serrated for improved pull-out and reduced torque while the double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

• Screw size 5 x 80mm
• Elementech 400 coating gives an anti-corrosive metal finish
• Lasts up to 6 times longer than standard zinc coatings
• Coating is salt spray tested to 400 hours
• Screws suitable for both interior and exterior use
• Supplied in box of 100
• Manufacturer's part FFP580Y