This camera module add-on board version 2 features a high quality 8 megapixel Sony IMX219 image sensor that is custom designed for the Raspberry Pi. The camera sensor has a fixed focus lens and the sensor is capable of producing images of 3280 x 2464 and capturing video at resolutions of 1080p30, 720p60 and 640 x 480p90. Connection between the module and board is via the dedicated Camera Serial Interface (CSI) which is specifically designed for interfacing to cameras, with attachment via a short ribbon cable. The small size and light weight of this add-on board make it perfect for mobile or other applications where size and weight are important. Suitable applications include CCTV security camera, motion detection, time lapse photography, etc.

• Turn a Raspberry Pi into a high quality still and video camera
• Software supported within the Raspbian Operating System
• Tiny board is just 25 x 23 x 9mm
• Weighs just over 3g

A camera module add-on board version 2 that features a HD 8 megapixel Sony IMX219 image sensor that is custom designed for use with the Raspberry Pi. The NOIR (no infrared) module omits the infrared filter from the lens, increasing sensitivity to the infrared band for IR and low light photography. A fixed focus lens and sensitive sensor gives the capability of taking still images of 3280 x 2464 pixels as well as capturing HD videos of 1080p30, 720p60 and 640x480p60/90. The module connects to the Pi using the dedicated Camera Serial Interface (CSI) with attachment via a short ribbon cable from a socket on the upper surface of the camera module. The small size and light weight of this module make it perfect for mobile applications and for IR photography, low light photography, monitoring plant growth, CCTV security camera, etc.

• Turn a Raspberry Pi into an IR and low light HD still and video camera
• Software supported within the Raspbian Operating System
• Ideal for twilight conditions
• Tiny board is just 25 x 23 x 9mm
• Weighs just over 3g

The Raspberry Pi SC0870 High Quality Camera M12, is a new version of the Raspberry Pi HQ Camera. The M12 version, like the original version, is built around the 12.3-megapixel Sony IMX477 image sensor module.

The M12 variant of the High-Quality Camera has modified metalwork that supports M12-mount lenses natively, with no need for an adapter.The High Quality Camera M12 module has been designed to accept any M12 mount lens, giving greater flexibility of use.

Three different M12 lenses are available separately, for use with the HQ Camera M12 version.

Excludes Pi 5 camera cable, please add 75-1290 (camera) / 75-1291 (display) if required.

Features

• 12.3 megapixels
• Aluminium M12 lens mount
• Integrated 1/4"-20 tripod mount
• Designed for use with Interchangeable M12 lenses
• Lenses not included (available separately)

What is included:

• HQ Camera module - M12 Mount, with integrated tripod mount
• 3 x Lens locking rings (1 required, plus 2 spares)
• Dust Cap

Specifications

• Sensor: Sony IMX477R stacked, back-illuminated
• Resolution: 12.3 megapixels
• Sensor size: 7.9mm sensor diagonal
• Pixel size: 1.55µm × 1.55µm
• Output: RAW12/10/8, COMP8
• Back focus: 2.6mm–11.8mm
• Lens standards: M12
• IR cut filter: Integrated
• Ribbon cable length: 200 mm
• Tripod mount: 1/4"-20
• Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, EMC 2014/30/EU, RoHS

The Raspberry Pi Camera Module 3 with a standard (75°) lens is a high quality 12 Megapixel Sony IMX708 image sensor custom designed add-on board for the Raspberry Pi, featuring powered autofocus, improved low-light sensitivity and High Dynamic Range (HDR) support.It connects to the Raspberry Pi via the dedicated Camera Serial Interface (CSI), designed especially for interfacing to cameras, using the short ribbon cable attached to the module. Camera Module 3's operation is fully supported by the libcamera library, including the rapid autofocus feature making it easy for beginners to use, while offering plenty for advanced users.

Camera Module 3 is available in standard (visible-light-only) and infrared-sensitive (NoIR) variants, with either a standard (75°) or wide-angle (120°) lens, giving you more options for your specific project needs. It can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

The small size and light weight of this module make it ideal for mobile or other applications where size and weight are important. Suitable applications include CCTV security camera, motion detection, time lapse photography, etc.

Excludes Pi 5 camera cable, please add 75-1290 (camera) / 75-1291 (display) if required.

Features

• Standard lens
• Improved low-light sensitivity
• High dynamic range (HDR) support
• Powered autofocus
• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• 2-wire serial control of focus mechanism

Specifications

• Sensor: Sony IMX708
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10
• IR cut filter: Integrated
• Autofocus system: Phase Detection Autofocus
• Dimensions: 25 × 24 × 11.5mm
• Ribbon cable length: 200mm
• Cable connector: 15 × 1mm FPC
• Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, EMC 2014/30/EU, RoHS

Lens Specification (Standard)

• Effective focal length 4.74mm
• f/1.8
• Diagonal field of view 120 degrees (at 16:9)
• 35mm equivalent focal length 28mm approx. (full width) - 30mm (3:2 crop)
• Focus 10cm - infinity

The Camera Module 3 is compatible with all Raspberry Pi boards fitted with a camera connector (CSI connector).To use this camera with a Raspberry Pi Zero (with smaller connector), an adapter cable is required.

Important:Camera Module 3 requires libcamera software to be installed, which requires an updated version of Raspberry Pi OS with a new driver.

The Raspberry Pi Camera Module 3 (NoIR) with a standard (75°) lens is a high quality 12 Megapixel Sony IMX708 image sensor custom designed add-on board for the Raspberry Pi, featuring powered autofocus, improved low-light sensitivity and High Dynamic Range (HDR) support.The NoIR version is infrared-sensitive with no InfraRed (NoIR) filter on the lens, which makes it perfect for shooting Infrared photography and taking pictures/video in low light (twilight) environments.It connects to the Raspberry Pi via the dedicated Camera Serial Interface (CSI), designed especially for interfacing to cameras, using the short ribbon cable attached to the module. Camera Module 3's operation is fully supported by the libcamera library, including the rapid autofocus feature making it easy for beginners to use, while offering plenty for advanced users.

Camera Module 3 is available in standard (visible-light-only) and infrared-sensitive (NoIR) variants, with either a standard (75°) or wide-angle (120°) lens, giving you more options for your specific project needs. It can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

The small size and light weight of this module make it ideal for mobile or other applications where size and weight are important. Suitable applications including IR photography, low light photography, CCTV security camera, motion detection, time lapse photography, etc.

Excludes Pi 5 camera cable, please add 75-1290 (camera) / 75-1291 (display) if required.

Features

• Infrared-sensitive (NoIR)
• Standard lens
• Improved low-light sensitivity
• High dynamic range (HDR) support
• Powered autofocus
• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• 2-wire serial control of focus mechanism

Specifications

• Sensor: Sony IMX708
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10
• IR cut filter: Not present (NoIR)
• Autofocus system: Phase Detection Autofocus
• Dimensions: 25 × 24 × 11.5mm
• Ribbon cable length: 200mm
• Cable connector: 15 × 1mm FPC
• Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, EMC 2014/30/EU, RoHS

Lens Specification (Standard)

• Effective focal length 4.74mm
• f/1.8
• Diagonal field of view 120 degrees (at 16:9)
• 35mm equivalent focal length 28mm approx. (full width) - 30mm (3:2 crop)
• Focus 10cm - infinity

The Camera Module 3 is compatible with all Raspberry Pi boards fitted with a camera connector (CSI connector). To use this camera with a Raspberry Pi Zero (with smaller connector), an adapter cable is required.

Important:Camera Module 3 requires libcamera software to be installed, which requires an updated version of Raspberry Pi OS with a new driver.

The Raspberry Pi Camera Module 3 with a wide-angle (120°) lens is a high quality 12 Megapixel Sony IMX708 image sensor custom designed add-on board for the Raspberry Pi, featuring powered autofocus, improved low-light sensitivity and High Dynamic Range (HDR) support.It connects to the Raspberry Pi via the dedicated Camera Serial Interface (CSI), designed especially for interfacing to cameras, using the short ribbon cable attached to the module. Camera Module 3's operation is fully supported by the libcamera library, including the rapid autofocus feature making it easy for beginners to use, while offering plenty for advanced users.

Camera Module 3 is available in standard (visible-light-only) and infrared-sensitive (NoIR) variants, with either a standard (75°) or wide-angle (120°) lens, giving you more options for your specific project needs. It can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

The small size and light weight of this module make it ideal for mobile or other applications where size and weight are important. Suitable applications include CCTV security camera, motion detection, time lapse photography, etc.

Excludes Pi 5 camera cable, please add 75-1290 (camera) / 75-1291 (display) if required.

Features

• Wide-angle lens
• Powered autofocus
• Improved low-light sensitivity
• High dynamic range (HDR) support
• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• 2-wire serial control of focus mechanism

Specifications

• Sensor: Sony IMX708
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4µm × 1.4µm
• Horizontal/vertical: 4608 × 2592 pixels
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10
• IR cut filter: Integrated
• Autofocus system: Phase Detection Autofocus
• Dimensions: 25 × 24 × 12.4mm
• Ribbon cable length: 200mm
• Cable connector: 15 × 1mm FPC
• Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, EMC 2014/30/EU, RoHS

Lens Specification (Wide)

• Effective focal length 2.75mm
• f/2.2
• Diagonal field of view 120 degrees (at 16:9)
• 35mm equivalent focal length roughly 16mm (full width) - 18mm (3:2 crop)
• Focus 5cm – infinity

The Camera Module 3 is compatible with all Raspberry Pi boards fitted with a camera connector (CSI connector). To use this camera with a Raspberry Pi Zero (with smaller connector), an adapter cable is required.

Important:Camera Module 3 requires libcamera software to be installed, which requires an updated version of Raspberry Pi OS with a new driver.

The Raspberry Pi Camera Module 3 (NoIR) with a wide-angle (120°) lens is a high quality 12 Megapixel Sony IMX708 image sensor custom designed add-on board for the Raspberry Pi, featuring powered autofocus, improved low-light sensitivity and High Dynamic Range (HDR) support.The NoIR version is infrared-sensitive with no InfraRed (NoIR) filter on the lens, which makes it perfect for shooting Infrared photography and taking pictures/video in low light (twilight) environments.It connects to the Raspberry Pi via the dedicated Camera Serial Interface (CSI), designed especially for interfacing to cameras, using the short ribbon cable attached to the module. Camera Module 3's operation is fully supported by the libcamera library, including the rapid autofocus feature making it easy for beginners to use, while offering plenty for advanced users.

Camera Module 3 is available in standard (visible-light-only) and infrared-sensitive (NoIR) variants, with either a standard (75°) or wide-angle (120°) lens, giving you more options for your specific project needs. It can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

The small size and light weight of this module make it ideal for mobile or other applications where size and weight are important. Suitable applications including IR photography, low light photography, CCTV security camera, motion detection, time lapse photography, etc.

Excludes Pi 5 camera cable, please add 75-1290 (camera) / 75-1291 (display) if required.

Features

• Infrared-sensitive (NoIR)
• Wide-angle lens
• Improved low-light sensitivity
• High dynamic range (HDR) support
• Powered autofocus
• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• 2-wire serial control of focus mechanism

Specifications

• Sensor: Sony IMX708
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10
• IR cut filter: Not present (NoIR)
• Autofocus system: Phase Detection Autofocus
• Dimensions: 25 × 24 × 12.4mm
• Ribbon cable length: 200mm
• Cable connector: 15 × 1mm FPC
• Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, EMC 2014/30/EU, RoHS

Lens Specification (Wide)

• Effective focal length 2.75mm
• f/2.2
• Diagonal field of view 120 degrees (at 16:9)
• 35mm equivalent focal length roughly 16mm (full width) - 18mm (3:2 crop)
• Focus 5cm – infinity

The Camera Module 3 is compatible with all Raspberry Pi boards fitted with a camera connector (CSI connector). To use this camera with a Raspberry Pi Zero (with smaller connector), an adapter cable is required.

Important:Camera Module 3 requires libcamera software to be installed, which requires an updated version of Raspberry Pi OS with a new driver.