Cable-mounted plugs ideal for connection to a compatible PCB-mounted socket.

• Number of ways: 4
• Nominal current: 16A
• Rated voltage (III/2): 320V
• Pitch: 5.08mm
• Connection method: screw connection with tension sleeve
• Conductor cross-section 2.5mm²
• Colour: green
• Contact surface: tin
• VDE & UL approvals

This SKEDD direct plug-in technology 1-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 1-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/1-PV-5,0-ZB

This SKEDD direct plug-in technology 2-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 2-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/2-PV-5,0-ZB

This SKEDD direct plug-in technology 3-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 3-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/3-PV-5,0-ZB

This SKEDD direct plug-in technology 4-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 4-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/4-PV-5,0-ZB

This SKEDD direct plug-in technology 5-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 5-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/5-PV-5,0-ZB

This SKEDD direct plug-in technology 6-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 6-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/6-PV-5,0-ZB

This SKEDD direct plug-in technology 7-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 7-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/7-PV-5,0-ZB

This SKEDD direct plug-in technology 8-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 8-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/8-PV-5,0-ZB

This SKEDD direct plug-in technology 9-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 9-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/9-PV-5,0-ZB

This SKEDD direct plug-in technology 10-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 10-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/10-PV-5,0-ZB

This SKEDD direct plug-in technology 11-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 11-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/11-PV-5,0-ZB

This SKEDD direct plug-in technology 12-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 12-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/12-PV-5,0-ZB

This SKEDD direct plug-in technology 13-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 13-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/13-PV-5,0-ZB

This SKEDD direct plug-in technology 14-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 14-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/14-PV-5,0-ZB

This SKEDD direct plug-in technology 15-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 15-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/15-PV-5,0-ZB

This SKEDD direct plug-in technology 16-way PCB connector from Phoenix Contact has spring-loaded contacts that connect directly to the through-plated holes in the PCB without soldering. The advantage is that there is no need for an additional header or soldering, so your component and process costs are reduced.

The connector mounts easily on the PCB without tools or solder and locks into place with built-in mounting rivets to form a vibration-resistant connection. The connector can be easily removed, making it ideal for use as a test plug.

The connector is suitable for conductor cross-sections from 0.2 to 2.5mm². It can handle currents up to 12A and voltages up to 320V (IEC).

• 16-way
• Current rating: up to 12A
• Voltage rating: up to 320V (300V UL)
• Conductor cross-sections: 0.2 to 2.5mm²
• Pitch: 5.0mm
• Phoenix Contact type SDC 2,5/16-PV-5,0-ZB

Solder-enabled PCB Screw Terminals from PTR, 17.5A, with wire protection, 5.08mm pitch with 2 poles.

• Colour grey
• Wire size AWG 22 - 12
• Nominal voltage 250V

End stackable interlocking terminal block with 12 poles, 5mm pitch. Blocks interlock to give any number of connections.

• 16A current rating
• 250V Voltage rating
• Screw termination
• PCB mounting
• 2.5mm² wire size
• Tin plated brass contact material
• PBT housing material
• M3 Zinc plated steel screw
• Stainless steel wire protector
• UL, VDE Approved.

These terminal blocks provide optimal control panel circuit connectors for all types of application. They are available with a 12A rating in 2-way and 3-way versions. The terminals are housed in moulded green polyamide PA66.

• Supplied with rising clamps
• Pitch 5.08mm
• Slotted screws
• Rated current 12A
• Rated voltage 250V
• Moulded housing in green flame retardant PA66
• Screws zinc plated steel
• Pin header tin plated brass
• Rising clamp: nickel plated brass
• 2-way option
• UL, VDE Approved.

End stackable interlocking terminal block with 2 poles, 5mm pitch. Blocks interlock to give any number of connections.

• 16A current rating
• 250V Voltage rating
• Screw termination
• PCB mounting
• 2.5mm² wire size
• Tin plated brass contact material
• PBT housing material
• M3 Zinc plated steel screw
• Stainless steel wire protector
• UL, VDE Approved.

Interlocking terminal block with 2 poles, 5mm pitch. Blocks interlock to give any number of connections.

• Vertical orientation
• Interlocking (2-way and 3-way)
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

These 5mm pitch PCB terminal blocks from TruConnect interlock to give any number of connections.

• 2 poles
• 16A current rating
• 300V Voltage rating
• Screw termination
• PCB mounting
• PBT housing material
• M2.6 zinc plated steel
• UL Approved.

These 2-way terminal blocks from Rapid provide optimal control panel circuit connectors for every type of application. Voltage and current carrying capacity of these pluggable terminal blocks is 250V 18A per pole. They feature a tin-plated brass pin header and a nickel plated brass wire guard.

• 5.0mm pitch
• Slotted screws
• Rated current 18A
• Moulded housing in green flame retardant PA66
• Screws zinc plated steel
• Pin header tin plated brass
• Wire guard nickel plated brass
• UL, VDE Approved.

Horizontal moulded rising clamp terminal blocks with 7 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 9 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 11 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 4 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 5 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (0.25-2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 6 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 8 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 10 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal moulded rising clamp terminal blocks with 12 poles, 5.08mm pitch.

• Standard profile design
• Interlocking
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG (2.5mm²)
• Rated voltage: 300V
• Rated current: 15A
• Moulded housing in green flame retardant PA66
• Screws: M2.5, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 7 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to 14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 9 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to 14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 11 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to 14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 2 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 3 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 4 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 5 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 6 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 8 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 10 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 12 poles, 5mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 4 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 5 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 6 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 8 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 10 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved

Low profile, vertical mounting, moulded rising clamp terminal block with 12 poles, 5.08mm pitch.

• Low profile design
• Interlocking (2-way and 3-way)
• Vertical orientation
• Rising clamp
• Slotted screws
• 26 to14AWG (1.5mm²)
• Rated voltage: 300V
• Rated current: 12A
• Moulded housing in green flame retardant PA66
• Screws: M3, zinc plated steel
• Pin header: tin plated brass
• UL approved