Horizontal mounting moulded rising clamp terminal blocks with 2 poles, 5mm pitch.

• Standard profile design
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG
• Rated voltage 300V
• Rated current 15A
• Moulded housing in green flame retardant PA66
• Screws: zinc plated steel
• Pin header: tin plated brass
• UL approved

Horizontal mounting moulded rising clamp terminal blocks with 3 poles, 5mm pitch.

• Standard profile design
• Horizontal orientation
• Rising clamp
• Slotted screws
• 24 to 12AWG
• Rated voltage 300V
• Rated current 15A
• Moulded housing in green flame retardant PA66
• Screws: zinc plated steel
• Pin header: tin plated brass
• UL approved

End stackable interlocking terminal block with 6 poles, 5mm pitch. Blocks interlock to give any number of connections.

• 16A current rating
• 250V Voltage rating
• Screw termination
• PCB mounting
• 2.5mm² wire size
• Tin plated brass contact material
• PBT housing material
• M3 Zinc plated steel screw
• Stainless steel wire protector
• UL, VDE Approved.

The WAGO PCB Spring Connector 5mm 16A Grey with mounting flanges, 4-pin 5mm pitch, coding and two latching jacks. For surface mounting, screw mounting or similar fixing methods, with coding flange and latch flange, grey.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

The WAGO PCB Spring Connector 5mm 16A Grey is a female connector 16-pole pin spacing 5mm/0.197in with coding fingers and integrated fixing flanges.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

This 1-way PCB spring terminal block from WAGO is a modular PCB connectable single terminal for use with 256 series PCBs.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allow easier installation in smaller spaces.

• Body style: 45°
• Pitch 5/5.08mm
• Current rating 16A
• Cage clamp connection
• Grey colour
• Manufacturer's part 236-401

This 2-way PCB spring terminal block from WAGO is a modular PCB connectable single terminal for use with 256 series PCBs.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allow easier installation in smaller spaces.

• Body style: 45°
• Pitch 5/5.08mm
• Current rating 16A
• Cage clamp connection
• Grey colour
• Manufacturer's part 236-402

This 3-way PCB spring terminal block from WAGO is a modular PCB connectable single terminal for use with 256 series PCBs.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allow easier installation in smaller spaces.

• Body style: 45°
• Pitch 5/5.08mm
• Current rating 16A
• Cage clamp connection
• Grey colour
• Manufacturer's part 236-403

Stackable 4-pole PCB terminal block from WAGO with CAGE CLAMP® connection and screwdriver actuation.

• 45° conductor entry angle permits a wide range of applications and wiring options
• Commoning option
• Pitch 5/5.08mm
• Current rating 24A
• Colour: grey
• Height 17mm
• Width 22.3mm
• Depth 14mm
• Manufacturer's part 236-404

Stackable 6-pole PCB terminal block from WAGO with CAGE CLAMP® connection and screwdriver actuation.

• 45° conductor entry angle permits a wide range of applications and wiring options
• Commoning option
• Pitch 5/5.08mm
• Current rating 24A
• Colour: grey
• Height 17mm
• Width 32.3mm
• Depth 14mm
• Manufacturer's part 236-406

Stackable 8-pole PCB terminal block from WAGO with CAGE CLAMP® connection and screwdriver actuation.

• 45° conductor entry angle permits a wide range of applications and wiring options
• Commoning option
• Pitch 5/5.08mm
• Current rating 24A
• Colour: grey
• Height 17mm
• Width 42.3mm
• Depth 14mm
• Manufacturer's part 236-408

Stackable 12-pole PCB terminal block from WAGO with CAGE CLAMP® connection and screwdriver actuation.

• 45° conductor entry angle permits a wide range of applications and wiring options
• Commoning option
• Pitch 5/5.08mm
• Current rating 24A
• Colour: grey
• Height 17mm
• Width 62.3mm
• Depth 14mm
• Manufacturer's part 236-412

Stackable 48-pole PCB terminal block from WAGO with CAGE CLAMP® connection and screwdriver actuation.

• 45° conductor entry angle permits a wide range of applications and wiring options
• Commoning option
• Pitch 5/5.08mm
• Current rating 24A
• Colour: grey
• Height 17mm
• Width 242.3mm
• Depth 14mm
• Manufacturer's part 236-448

A 2-way pushbutton PCB terminal block from WAGO with 5mm pitch.

• Compact terminal strips
• Simple push-in termination for solid conductors
• Termination/removal of fine-stranded conductors via push-buttons
• 45° conductor entry angle provides easy, space-saving wiring
• CAGE CLAMP® connection
• Colour: grey
• Tin-plated copper alloy contacts
• Height 20.5mm
• Depth 13mm
• Width 11.5mm
• Manufacturer's part 250-502

This 3-way PCB push button terminal block from WAGO has a 45° entry angle for easy, space-saving wiring.

• Pitch 5mm
• Current rating 17.5A
• Push-in Cage Clamp® termination
• Number of poles 3
• Number of potentials 3
• Colour: grey
• Height 20.5mm
• Width 16.5mm
• Depth 13mm
• Manufacturer's part 250-503

A 4-way pushbutton PCB terminal block from WAGO with 5mm pitch.

• Compact terminal strips
• Simple push-in termination for solid conductors
• Termination/removal of fine-stranded conductors via push-buttons
• 45° conductor entry angle provides easy, space-saving wiring
• CAGE CLAMP® connection
• Colour: grey
• Tin-plated copper alloy contacts
• Height 20.5mm
• Depth 13mm
• Width 21.5mm
• Manufacturer's part 250-504

This 6-way PCB push button terminal block from WAGO has a 45° entry angle for easy, space-saving wiring.

• Pitch 5mm
• Current rating 17.5A
• Push-in Cage Clamp® termination
• Number of poles 6
• Number of potentials 6
• Colour: grey
• Height 20.5mm
• Width 31.5mm
• Depth 13mm
• Manufacturer's part 250-506

This 7-way PCB push button terminal block from WAGO has a 45° entry angle for easy, space-saving wiring.

• Pitch 5mm
• Current rating 17.5A
• Push-in Cage Clamp® termination
• Number of poles 7
• Number of potentials 7
• Colour: grey
• Height 20.5mm
• Width 36.5mm
• Depth 13mm
• Manufacturer's part 250-507

This 8-way PCB push button terminal block from WAGO has a 45° entry angle for easy, space-saving wiring.

• Pitch 5mm
• Current rating 17.5A
• Push-in Cage Clamp® termination
• Number of poles 8
• Number of potentials 8
• Colour: grey
• Height 20.5mm
• Width 41.5mm
• Depth 13mm
• Manufacturer's part 250-508

This 10-way PCB push button terminal block from WAGO has a 45° entry angle for easy, space-saving wiring.

• Pitch 5mm
• Current rating 17.5A
• Push-in Cage Clamp® termination
• Number of poles 10
• Number of potentials 10
• Colour: grey
• Height 20.5mm
• Width 51.5mm
• Depth 13mm
• Manufacturer's part 250-510

A 12-way pushbutton PCB terminal block from WAGO with 5mm pitch.

• Compact terminal strips
• Simple push-in termination for solid conductors
• Termination/removal of fine-stranded conductors via push-buttons
• 45° conductor entry angle provides easy, space-saving wiring
• CAGE CLAMP® connection
• Colour: grey
• Tin-plated copper alloy contacts
• Height 20.5mm
• Depth 13mm
• Width 61.5mm
• Manufacturer's part 250-512

A 12-way PCB terminal block from WAGO with CAGE CLAMP® connection which allows stripped solid and ferruled conductors to be pushed in.

With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart
• Ideal for in-the-field wiring thanks to simplified push-button actuation
• Convenient, tool-free operation
• Grey colour
• Tin-plated electrolytic copper contacts
• Pitch 5/5.08mm
• Width 62.9mm
• Height 22.2mm
• Depth 17.6mm
• Manufacturer's part 256-412

Stackable 1-pole PCB terminal block from WAGO with push button actuation.

• Ideal for in-the-field wiring
• Convenient, tool-free operation
• CAGE CLAMP® connection
• 45° entry
• Pitch 5/5.08mm
• Current rating 24A
• Colour: blue
• Height 22.2mm
• Width 7.8mm
• Depth 17.6mm
• Manufacturer's part 256-744

Stackable 1-pole PCB terminal block from WAGO with push button actuation.

• Ideal for in-the-field wiring
• Convenient, tool-free operation
• CAGE CLAMP® connection
• 45° entry
• Pitch 5/5.08mm
• Current rating 24A
• Colour: orange
• Height 22.2mm
• Width 7.8mm
• Depth 17.6mm
• Manufacturer's part 256-746

Stackable 1-pole PCB terminal block from WAGO with push button actuation.

• Ideal for in-the-field wiring
• Convenient, tool-free operation
• CAGE CLAMP® connection
• 45° entry
• Pitch 5/5.08mm
• Current rating 24A
• Colour: light green
• Height 22.2mm
• Width 7.8mm
• Depth 17.6mm
• Manufacturer's part 256-747

Double deck PCB terminal block from WAGO with 6 x 2 poles and 45° entry angle.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: grey
• Pitch 5mm
• Current rating 21A
• Number of poles: 6
• Number of potentials: 12
• Height 30.5mm
• Width 31mm
• Depth 21mm
• Manufacturer's part 736-106

Double deck PCB terminal block from WAGO with 8 x 2 poles and 45° entry angle.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: grey
• Pitch 5mm
• Current rating 21A
• Number of poles: 8
• Number of potentials: 16
• Height 30.5mm
• Width 41mm
• Depth 21mm
• Manufacturer's part 736-108

Double deck PCB terminal block from WAGO with 12 x 2 poles and 45° entry angle.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: grey
• Pitch 5mm
• Current rating 21A
• Number of poles: 12
• Number of potentials: 24
• Height 30.5mm
• Width 61mm
• Depth 21mm
• Manufacturer's part 736-112

Double deck 45° PCB terminal block from WAGO with 4 x 2 poles.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: orange
• Pitch 5mm
• Current rating 21A
• Number of poles: 4
• Number of potentials: 8
• Height 30.5mm
• Width 21.32mm
• Depth 21mm
• Manufacturer's part 736-304

Double deck 45° PCB terminal block from WAGO with 6 x 2 poles.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: orange
• Pitch 5mm
• Current rating 21A
• Number of poles: 6
• Number of potentials: 12
• Height 30.5mm
• Width 31.48mm
• Depth 21mm
• Manufacturer's part 736-306

Double deck 45° PCB terminal block from WAGO with 8 x 2 poles.

• Terminal strips with screwdriver-actuated CAGE CLAMP®
• High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
• Custom inkjet marking for all termination levels
• Colour: orange
• Pitch 5mm
• Current rating 21A
• Number of poles: 8
• Number of potentials: 16
• Height 30.5mm
• Width 41.64mm
• Depth 21mm
• Manufacturer's part 736-308

Stackable 1-pole PCB terminal block from WAGO with 45° entry angle.

• Screwdriver-actuated CAGE CLAMP® for custom terminal strip assemblies
• Comb-style jumper bars for commoning and distributing potentials
• Double solder pins for high mechanical stability
• Saves spaces thanks to positioning of terminal strips behind one another
• Integrated testing tap
• Marker slot for miniature WSB markers
• Pitch 5mm
• Rated current 32A
• Colour: grey
• Height 23mm
• Width 6.5mm
• Depth 22.9mm
• Manufacturer's part 745-801

Stackable 1-pole PCB terminal block from WAGO with 45° entry angle.

• Screwdriver-actuated CAGE CLAMP® for custom terminal strip assemblies
• Suitable for Ex-i applications
• Comb-style jumper bars for commoning and distributing potentials
• Double solder pins for high mechanical stability
• Saves spaces thanks to positioning of terminal strips behind one another
• Integrated testing tap
• Marker slot for miniature WSB markers
• Pitch 5mm
• Rated current 32A
• Colour: blue
• Height 23mm
• Width 6.5mm
• Depth 22.9mm
• Manufacturer's part 745-804

Staggered 2-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 11.5mm
• Depth 15mm
• Manufacturer's part 804-102

Staggered 3-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 16.5mm
• Depth 15mm
• Manufacturer's part 804-103

Staggered 4-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 21.5mm
• Depth 15mm
• Manufacturer's part 804-104

Staggered 6-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 31.5mm
• Depth 15mm
• Manufacturer's part 804-106

Staggered 7-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 36.5mm
• Depth 15mm
• Manufacturer's part 804-107

Staggered 8-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 41.5mm
• Depth 15mm
• Manufacturer's part 804-108

Staggered 12-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

• Large conductor entry accommodates conductors with a cross-section up to 12 AWG with insulation diameter up to 4.2mm
• Rated current 24A
• Pitch 5mm
• Colour: grey
• Height 18.1mm
• Width 61.5mm
• Depth 15mm
• Manufacturer's part 804-112