For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car. Precision manufactured steel bushes with chemically blacked finish. Suitable for use on most cars and light commercial vehicles. Display packed in handy storage case.

This revolutionary tool makes quick work of accurately aligning the clutch and pressure plate before fitting. Fits most vehicles up to 5 tons except vehicles with double plate clutches. Body manufactured from ABS with brassed screw and supplied with three collets. A full instruction leaflet is included with each tool. Display packed.

Expert Quality universal clutch and brake bleeding kit. A comprehensive 6 piece spanner set suitable for most brake and clutch hydraulic units. Colour coded bleed nipples provide easy identification. The bleed nipples are fitted with a 6 - point socket, helping to prevent slipping and rounding. Supplied with a silicon hose and the integrated one - way valve prevents air returning into the system. Supplied in a heavy duty storage case.

• Contents:
• 6x Colour coded spanners (7 - 12mm)
• 1x 1200mm (approx) hose

Expert Quality, for fast accurate alignment of flywheel pilot hole with clutch drive plate when assembling to vehicles. Supplied with eight precision manufactured steel bushes and three expanding mandrels. Suitable for most cars and light commercial vehicles. Display packed in storage case.

• Contents:
• 3 x Expanding mandrels: 15 - 19mm diameter, 20 - 26mm diameter, 23 - 36mm diameter
• 8 x Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Expert Quality, essential time saving tools specifically designed for use with Draper self adjusting clutch kit (Stock No. 38600). For use on BMW clutches fitted with a centrally mounted removable locking plate, which can only be removed once the clutch cover is fitted.

Manufactured from Chrome Vanadium steel. Specially designed for use on Ford bell housings. Use with 10mm spanner to access restricted areas.

Chemically blackened steel components in storage case. Aids alignment of clutch plate for assembly.

Suitable for a wide range of commercial vehicles. Screw action provides fast adjustment to suit hub diameter. Four interchangeable spigot adaptors aid close alignment.

1/2"Sq Drive Chrome Vanadium steel socket with knurled ring and S2 steel bit. Suitable for gearbox drain plugs on Audi; A3, A4, A6, VW; Golf IV and LT.

Nylon components with steel main shaft. Fits 90% of cars and light vans up to 5tonne gross (not suitable for vehicles with double plate clutches). Supplied with three different sized expanding collets.

• Nylon components with steel main shaft.
• Fits 90% of cars and light vans up to 5tonne gross (not suitable for vehicles with double plate clutches).
• Supplied with three different sized expanding collets.
• Model No. VS010

High quality die-cast aluminium tool. Suitable for pre-tensioning clutch plate combination prior to re-assembly.

Necessary for pre-tensioning self-adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool, allowing the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors. Supplied in storage case.

Essential tool for DSG clutch removal and installation used on VAG 6/7 speed gearboxes. Kit includes clutch support device, puller, gauge block, thrust piece and assembly lever. Supplied in storage case.

• Suitable for use on VAG 6/7 speed gearboxes.
• Applications: Audi A3 (04-19), VW Golf (04-19), VW Touareg (04-19).
• OEM Tool(s): T10323, T10373, T10374, T10376, T10407.
• Kit includes clutch support device, puller, gauge block, thrust piece and assembly lever.
• Supplied in storage case.
• Model No. VS0122

Clutch removal/refitting tool kit designed for Ford Dual Clutch systems. Suitable for DPCS6 and 6DCT250 6-speed gearboxes fitted to Fiesta, Focus and EcoSport vehicles. Equivalent to OEM 307-675. Supplied in a storage case with instructions.

• Clutch removal/refitting tool kit designed for Ford Dual Clutch systems.
• Suitable for DPCS6 and 6DCT250 6-speed gearboxes fitted to Fiesta, Focus and EcoSport vehicles.
• Equivalent to OEM 307-675.
• Supplied in a storage case with instructions.
• Model No. VS3075

• • Clutch removal/refitting tool kit designed for Ford Dual Clutch systems. • Suitable for DPCS6 and 6DCT250 6-speed gearboxes fitted to Fiesta, Focus and EcoSport vehicles. • Equivalent to OEM 307-675. • Supplied in a storage case with instructions. • Model No. VS3075

For clutch plate alignment on 5 speed gearboxes fitted to engine codes (W10, B14A and B16A). Six Speed applications use Model No. VS717.

• For clutch alignment on BMW MINI One (01 to 06), MINI Cooper (01 to 06) and MINI Convertible (05 to 08).
• Engine codes (W10, B14A and B16A) fitted with a 5 speed gearbox.
• OEM Tool: 216100.
• Six Speed applications use Model No. VS717.
• Model No. VS716

For clutch plate alignment on 6 speed gearboxes. Engine codes: Petrol; W11, B16A, Diesel; W17, D14. Five speed applications use Model No. VS716.

• For clutch alignment on BMW Mini One D (01 to 06), Mini Cooper S (01 to 06), Mini Cooper S JCW (01 to 06) and Mini Convertible (05 to 08) fitted with a 6 speed gearbox.
• Engine Codes: Petrol
• W11, B16A, Diesel
• W17, D14.
• OEM Tool: 212210.
• Five speed applications use Model No. VS716.
• Model No. VS717