A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 6.30mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 240R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 4.90mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 247R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 9.85mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 270R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 4.90mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 208R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 18.00mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 370R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A snap-fit ferrite core suitable for round cables or bundled wires with diameters up to 25.15mm. Designed to work at lower and broadband frequencies 1 to 300MHz.

• Attenuation 340R
• Provide common-mode filtering for multi-strand, and differential-mode filtering for single conductors
• UL94-VO rated polypropylene cases

A cylindrical split ferrite cable core that can take a max. cable diameter of 5.0mm. The core has an impedance of 33Ω at 25MHz and 92Ω at 100MHz. This device will greatly reduce both common and differential mode EMI/RFI and is a cost effective solution for retrofit and post-assembly use for internal and external power and data cables.

• Hinged cap
• Rugged construction
• Operating temperature range –25°C to +105°C