The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 5mm.

The Stahlwille Series 44K INHEX short sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille INHEX Socket 1/4in Drive Short.

Size: 3mm.

The Stahlwille Series 44K INHEX short sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille INHEX Socket 1/4in Drive Short.

Size: 4mm.

The Stahlwille Series 44K INHEX short sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille INHEX Socket 1/4in Drive Short.

Size: 5mm.

The Stahlwille Series 44K INHEX short sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille INHEX Socket 1/4in Drive Short.

Size: 6mm.

The Stahlwille Series 44K INHEX short sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille INHEX Socket 1/4in Drive Short.

Size: 8mm.

The Stahlwille Series 40TX Sockets for external TORX screws have 1/4in Square Drives, and are manufactured from HPQ® high performance steel and chrome plated.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. Free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

Overall length: 23mm.

MADE IN GERMANY.

Stahlwille Outside TORX Socket 1/4in Drive E5.

Size: 4.7mm.

The Stahlwille Series 40TX Sockets for external TORX screws have 1/4in Square Drives, and are manufactured from HPQ® high performance steel and chrome plated.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. Free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

Overall length: 23mm.

MADE IN GERMANY.

Stahlwille Outside TORX Socket 1/4in Drive E6.

Size: 5.7mm.

The Stahlwille Series 40TX Sockets for external TORX screws have 1/4in Square Drives, and are manufactured from HPQ® high performance steel and chrome plated.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. Free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

Overall length: 23mm.

MADE IN GERMANY.

Stahlwille Outside TORX Socket 1/4in Drive E8.

Size: 7.5mm.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T10.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T15.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T20.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T25.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T27.

Stahlwille Screwdriver sockets for inside TORX screws. 1/4in Square Drive. Made from chrome alloy steel and chrome plated.

Overall length: 28mm.

Made in Germany.

Stahlwille TORX Bit Socket 1/4in Drive.

Size: T30.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4 in Drive.

Size: 1/16 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 5/64 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 3/32 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 7/64 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 1/8 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 9/64 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4in Drive.

Size: 5/32 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4 in Drive.

Size: 3/16 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4 in Drive.

Size: 7/32 AF.

The Stahlwille Series 44 INHEX sockets have 1/4in Square Drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated.

Manufactured to DIN 3124/ISO 2725-1 standards.

Overall length: 55mm.

MADE IN GERMANY.

Stahlwille INHEX Socket 1/4 in Drive.

Size: 1/4 AF.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 7/32 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 1/4 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 9/32 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 5/16 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 11/32 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 3/8 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/4in Drive.

Size: 7/16 AF.Overall length: 23mm.

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Size 1/2 AFOverall length 23mm

Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in Square Drive in AF imperial sizes are made from HPQ® high-performance steel, and are chrome plated.

HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Size: 9/16 AF.Overall length: 24mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 3/16 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 1/4 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket 1/4in Drive.

Size: 9/32 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 5/16 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 3/8 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 7/16 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 1/2 AF.Overall length: 50mm.

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial.

The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm.

MADE IN GERMANY.

Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive.

Size: 9/16 AF.Overall length: 50mm.

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 3/16 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 7/32 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 1/4 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 9/32 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 5/16 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 11/32 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 3/8 in AF

A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mm

Size. 7/16 in AF