A solid state magnetically operated switch designed for use on all Norgren pneumatic piston cylinder ranges. The switch can be mounted flush using the included special adaptor.

• Reliable switching with very fast response time
• Particularly suitable for use in high levels of vibration
• Normally open PNP
• Cable length 5m
• LED Indicator as standard
• Operating temperature -40°C to +80°C

This magnetically operated reed switch is suitable for use with all Norgren pneumatic/hydraulic cylinder ranges with magnetic pistons. The switch can be flush mounted with the supplied adaptor and there is an LED to indicate operation.

• Terminated by 5m cable
• Wide input voltage
• Normally open configuration
• Protection class IP66

This magnetically operated reed switch is suitable for use with all Norgren pneumatic/hydraulic cylinder ranges with magnetic pistons. The switch can be flush mounted with the supplied adaptor and there is an LED to indicate operation.

• Terminated by 0.3m cable with M8 plug
• Wide input voltage
• Normally open configuration
• Protection class IP66

This mounting bracket enables a Norgren magnetic switch to be mounted on to a roundline cylinder.

• Cylinder diameter 25mm

This mounting bracket enables a Norgren magnetic switch to be mounted on to a roundline cylinder.

• Cylinder diameter 32mm

This sensor can be mounted onto a Univer pneumatic cylinder to detect the position of the piston. It works by detecting the magnetic field produced by the magnet incorporated in the piston. The sensor can then be used to switch an electrical circuit, e.g. a safety interlock or warning signal or to energise the next component in a sequence. This model employs an electromechanical reed switch and can be employed in both in DC and AC circuits. An LED indicator shows its switching status.

• Mounts on to Univer pneumatic cylinder
• Detects the position of the piston
• Can be used to switch an electrical circuit, e.g. warning signal, etc.
• Electromechanical model uses a reed switch
• Can be employed in both in DC and AC circuits
• LED indicator shows switch status
• Fitted with 3m cable
• Height: 4.5mm
• Length: 30mm
• Width: 6.2mm
• Max. current: 120mA
• Max. device temperature: +80°C
• Min. device temperature: -20°C
• Univer type: DF-220

This sensor can be mounted onto a Univer pneumatic cylinder to detect the position of the piston. It works by detecting the magnetic field produced by the magnet incorporated in the piston. The sensor can then be used to switch an electrical circuit, e.g. a safety interlock or warning signal or to energise the next component in a sequence. This model employs an electronic transistor switch and can only be employed in DC circuits. An LED indicator shows its switching status.

• Mounts on to Univer pneumatic cylinders
• Detects the position of the piston
• Can be used to switch an electrical circuit, e.g. warning signal, etc.
• Electronic model with PNP transistor output
• Functions in DC circuits up to 30V max.
• LED indicator shows switch status
• Fitted with 3m cable
• Height: 4.5mm
• Length: 30mm
• Width: 6.2mm
• Max. current: 500mA
• Max. device temperature: +80°C
• Min. device temperature: -20°C
• Univer type: DF-330