This yellow ESD floor marking tape from Antistat is printed with the ESD logo, is highly visible and adheres well to most surfaces. This self-adhesive tape is ideal for marking the boundaries of most ESD protected areas.

• Adheres well to synthetic surfaces such as PVC tiles
• Adheres to concrete floors will remain intact for several months, depending on traffic
• Yellow tape printed in black with the ESD logo as per EN61340-5-1
• Also includes the text ESD Protected Area
• Carrier tape laminated with a clear film to protect the print
• Not antistatic as it is intended for use outside the EPA
• 75mm width x 33m length
• Manufacturer's part 054-0007

This round conductive waste bin from Antistat is made from polypropelene and can accommodate 14 litres of waste.

• Black conductive polypropylene
• Marked with ESD logo
• Dimensions 265 x 320mm
• Washable
• Manufacturer's part 091-0031

These ESD and static dissipative refuse sacks from Antistat are ideal for use within ESD protected areas.

• Made from polyethylene
• Colour yellow
• ESD caution logo and text printed in black
• Size 110 litres
• Supplied in packs of 100
• Manufacturer's part 091-0036

This Antistatic Ring Binder is designed to replace standard high-charging insulative binders within the EPA. The materials used in standard ring binders have the potential to generate static charges which could damage sensitive components and equipment.

Made in portrait orientation, this folder is finished in high quality, permanently antistatic blue PVC and is fitted with two 50mm rings. The ESD warning symbol is featured on the front and spine of the ring binder, and it has a 65mm label pocket on the spine.

• Two 50mm rings
• Surface resistance: 10¹¹Ω/sq
• D-ring mechanism
• Wipe-clean permanently antistatic PVC covering
• Printed with the ESD logo to BS EN 61340-5-1 on front and spine
• Feature a 65mm spine label pocket
• Safely store paper products in an EPA, ensuring no static charges are generated
• House instructions manuals and technical datasheets
• Maintain administrative efficiency within the EPA
• Antistat type 105-0016

This Antistatic Ring Binder is designed to replace standard high-charging insulative binders within the EPA. The materials used in standard ring binders have the potential to generate static charges which could damage sensitive components and equipment.

Made in portrait orientation, this folder is finished in high quality, permanently antistatic blue PVC and is fitted with two 25mm rings. The ESD warning symbol is featured on the front and spine of the ring binder, and it has a 65mm label pocket on the spine.

• Two 25mm rings
• Surface resistance: 10¹¹Ω/sq
• D-ring mechanism
• Wipe-clean permanently antistatic PVC covering
• Printed with the ESD logo to BS EN 61340-5-1 on front and spine
• Feature a 65mm spine label pocket
• Safely store paper products in an EPA, ensuring no static charges are generated
• House instructions manuals and technical datasheets
• Maintain administrative efficiency within the EPA
• Antistat type 105-0020

This Antistatic Ring Binder is designed to replace standard high-charging insulative binders within the EPA. The materials used in standard ring binders have the potential to generate static charges which could damage sensitive components and equipment.

Made in portrait orientation, this folder is finished in high quality, permanently antistatic blue PVC and is fitted with four 50mm rings. The ESD warning symbol is featured on the front and spine of the ring binder, and it has a 65mm label pocket on the spine.

• Four 50mm rings
• Surface resistance: 10¹¹Ω/sq
• D-ring mechanism
• Wipe-clean permanently antistatic PVC covering
• Printed with the ESD logo to BS EN 61340-5-1 on front and spine
• Feature a 65mm spine label pocket
• Safely store paper products in an EPA, ensuring no static charges are generated
• House instructions manuals and technical datasheets
• Maintain administrative efficiency within the EPA
• Antistat type 105-0025

These A3 laminating film pouches will work with any standard document laminating machine but have been specially formulated to be conductive for use in ESD Protection Areas.

• A3 size
• Work with any standard laminating machine
• Ideal for protecting instruction documents
• Use at workstations where loose paper is not permitted
• Suitable for clean-rooms
• Made from PET / EVA
• 80 micron thickness
• 95gsm
• Supplied in packs of 100
• Antistat type 105-0066

These A4 laminating film pouches will work with any standard document laminating machine but have been specially formulated to be conductive for use in ESD Protection Areas.

• A4 size
• Work with any standard laminating machine
• Ideal for protecting instruction documents
• Use at workstations where loose paper is not permitted
• Suitable for clean-rooms
• Made from PET / EVA
• 80 micron thickness
• 95gsm
• Supplied in packs of 100
• Antistat type 105-0069

This moulded polyethylene ESD-safe drinking bottle has an average surface resistivity of 10⁹ to 10¹⁰Ω/square and will dissipate a static charge of +5000V in less than 2 seconds at 40% relative humidity.

It does not contain any Ethoxylated Tertiary Amine, widely used as an antistatic agent. By its chemical nature, it will not have any chemical reactivity with solvents as TCE or alcohol.

The pH of de-ionised water solutions tested, were the same before and after a seven day period. No colour or physical change was noted for any solvents tested.

• Safe for drinks
• Capacity: 900ml
• Antistat type 146-0077

A pair of antistatic scissors, ideal for use in ESD Protected Areas (EPAs) and clean room environments.

• Colour: black
• Permanently antistatic
• Surface resistance 10⁵ to 10⁸Ω
• Friction voltage: less than 100V
• Tested at both 12% and 50% RH at 23°C
• Test method: two point resistance as per ANSI/ESD STM 11.13-2015
• Length 178mm
• Antistat type 157-0007

A standard computer mouse made from antistatic plastic, ideal for use in ESD protected areas where a conventional mouse might produce static charges.

• Standard 2-button mouse with scroll wheel
• Marked with ESD symbol
• USB connection
• Compatible with standard PC systems
• Antistat type 157-0010

This basic calculator is made from antistatic plastic and is ideal for use in ESD protected areas.

• Basic function calculator with memory
• Solar powered
• Marked with ESD symbol
• Antistat type 157-0011

This handy desk tidy helps to keep pens, pencils, rulers and other stationery items neat and tidy, as well as preventing the build-up of static charges on them.

• Supplied flat packed
• Antistat type 157-0012

This standard layout keyboard is formed from conductive plastic to prevent the build-up of potentially damaging static charges.

It is ideal for use in static-controlled areas and is a direct replacement for standard USB keyboards.

• Antistatic plastic construction
• USB connection
• Standard QWERTY layout
• Antistat type 157-0013

A retractable ballpoint pen made from antistatic plastic, ideal for use in ESD protected areas.

• Retractable antistatic ballpoint pen
• Ink colour: black
• ESD symbol on pocket clip
• Antistat type 157-0117

This ESD Conductive Lamination Sheet A4 304 x 217mm from BJZ has been manufactured from PET film material and is ideal for lamination of documents via a conventional laminating machine. The documents are protected by an ESD-safe surface.

• Transparent
• 304 x 217mm
• 10⁴-10⁵Ω resistance to ground
• Antistatic laminate film
• Manufacturer's part C-199 2751

These stackable ESD A4 Document Trays from BJZ are made from conductive plastic that helps to prevent the creation and build-up of electrostatic charges.

• Black colour
• 330 x 240 x 60mm (L x W x H)
• made from conductive polystyrene (PS)
• 10⁴ Ω surface resistance
• Manufacturer's part C-199 975
• Trays are sold singly

Made from dissipative thermoplastic material for use in ESD areas - contains standard quality cartridge