Constructed from heavy-duty Ø114 steel pipe. Features integral lock. Sturdy 200 x 220mm base plate with four pre-drilled Ø13.5mm holes for fixing to floor (fixings not included).

• Constructed from heavy-duty Ø114mm steel pipe, standing 900mm tall including metal hoop.
• Sealed top section with a fixed metal hoop to run a chain or cordon through (maximum Ø24mm), which also acts as a handy grip when lifting or lowering.
• Ideal for protecting designated parking, or preventing unwanted use of passage outside of chosen hours.
• Sturdy 200 x 220mm base plate with four pre-drilled Ø13.5mm holes for fixing to floor (fixings not included).
• Integral lock recessed in base section, which releases the base of the bollard, allowing it to pivot 90�° to lay flat on its protective rubber pad.
• Once bollard arm is horizontal the maximum height is 130mm, for ample vehicle clearance.
• Model No. FBOL900

Heavy-duty parking barrier manufactured from Ø50mm tube steel. Supplied with integral lock and two keys. Powder coat finish for corrosion resistance. For full security, we suggest you drill out the screw head after installation.

Claw locks around wheel rim and tyre. Simple and quick ratchet action makes fitting easy. Fully lockable. No need to touch wheel or tyre when installing or removing so hands remain clean. Plastic sleeved claws will not damage alloys. Finished in yellow and red for high visibility.

• Claw locks around wheel rim and tyre.
• Simple and quick ratchet action makes fitting easy.
• No need to touch wheel or tyre when installing/removing so hands remain clean.
• Plastic sleeved claws will not damage alloys.
• Yellow and red finish for high visibility.
• Model No. PB395

Manufactured from quality steel with zinc plating for corrosion resistance. Simple and quick ratchet action makes protection easy. Fully lockable and supplied with two keys. Ideal for forecourt use. Finished in yellow for high visibility.

• Manufactured from quality steel with zinc plating for corrosion resistance.
• Simple and quick ratchet action makes protection easy.
• Fully lockable and supplied with two keys.
• Min./Max. Clamp Diameter: Ø450/640mm.
• Max. Tyre Width: 225mm.
• Model No. PB397

Steel bollard base plate fixes permanently in place using four pre-drilled Ø23.5mm mounting holes (fixings not included). Base will fit various sizes of bollards (not supplied) - especially suited to Sealey Model No's. BOL600, BOL900, BOL1050 and BOL1200. Ø11mm Padlock hole will accommodate most robust padlock designs such as Sealey Model No. PL402L or PL302W.

• Steel bollard base plate fixes permanently in place using four pre-drilled Ø23.5mm mounting holes (fixings not supplied).
• Remove collar, slide base of bollard into recess then replace the collar which can then be padlocked in place (padlock not included).
• Base will fit various sizes of bollards (not included) - especially suited to Sealey Model No's. BOL600, BOL900, BOL1050 and BOL1200.
• Ø11mm Padlock hole will accommodate most robust padlock designs such as Sealey Model No. PL402L.
• Model No. RBLP