This thermometer from Brannan is ideal for fixing onto a pipe so that the temperature can be regulated - for instance, on a radiator pipe. It comes supplied with a fixing spring and is manufactured in a plastic case with a push-in acrylic window, displaying temperature ranges of 0 to +120°C and +30 to 250°F.
Easy to adjust
Suitable for pipe diameter: 20 to 50 mm
Dial dimensions:With bezel: 66mm diameter x 30mm Without bezel: 62mm diameter x 29mm
This thermometer from ETI has been manufactured to a high standard and is the ideal instrument for achieving maximum accuracy and repeatability of a temperature reading. Please Note: Probe Not Supplied Please see below for link to suitable probes
,
The Therma 1 is rugged and comes housed in a robust ABS case containing a 'Biomaster' additive, reducing bacterial growth. The thermometer operates through the range of +300 to +1372°C, with a 0.1°C or 1°C resolution and ±0.4°C ±0.1% accuracy. It is also simple to use and has been designed with an easy to read, LCD display with open circuit error, hold and low battery indication.
The thermometer is powered by 3 x AAA batteries (not supplied), giving a minimum of five years battery life. The unit will power off automatically after 10 minutes, maximising battery life (can be disabled, if not required).
This thermometer from ETI has been manufactured to a high standard and is the ideal instrument for achieving maximum accuracy and repeatability of a temperature reading.
The Therma 3 is rugged and comes housed in a robust ABS case containing a 'Biomaster' additive, reducing bacterial growth. The thermometer operates through the range of -100 to +1372°C, with a 1°C resolution and ±1°C ±0.1% accuracy. It is also simple to use and has been designed with an easy to read, LCD display with open circuit error, hold and low battery indication.
The thermometer is powered by three AAA batteries (not supplied), giving a minimum of five years battery life. The unit will power off automatically after 10 minutes, maximising battery life (can be disabled, if not required).
The MicroTherma 1 microprocessor-based thermometer from ETI measures all temperature over a wide range from -270 to +1768°C with a 0.1°C resolution. It incorporates an easy-to-read 4½-digit dual LCD display with open circuit, low battery, hold, max/min and °C/°F indication.
And this thermometer should never need recalibrating as the built-in microprocessor enables the instrument to continuously and automatically carry out self-diagnostic recalibration. In addition, the user can adjust the reading (±2.5°C) to offset any probe errors, correcting any inaccuracies of the thermocouple probe.
Each thermometer thereafter will automatically store, display the offset and adjust the instrument for the known probe error, maximising system accuracy.
The versatile MicroTherma 1 accepts any type K, J, T, R, N, S or E thermocouple probe - the probe type is simply selected through the mode button. The unit incorporates both maximum and minimum readings with a reset function and also features an auto-power off facility to prolong battery life, turning the instrument off automatically after 30 minutes. This function can be disabled if not required.
Selectable parameters include display contrast and internal CJC temperature reading
Dimensions 141 x 73 x 35mm
Case made from ABS plastic
Made in the UK
2 year guarantee
Battery life 1000 hours
Manufacturer's part 221-091
Supplied without probe. Requires 2 x AAA batteries (supplied).
The Therma 1T handheld thermometer from ETI utilises a type T thermocouple sensor which offers both fast response and a measurement range of -100 to +400°C with a 0.1 °C resolution.
The thermometer is housed in a robust ABS case containing Biomaster which reduces bacterial growth. The Therma 1T features a large, easy to read, LCD display with open circuit and low battery indication.
Each thermometer is powered by 3 x AAA batteries (supplied) with a minimum of five years battery life. The instrument will power off automatically after 10 minutes, but this feature can be disabled if not required.
12mm LCD display
Dimensions 128 x 56 x 25mm
Made in the UK
2 years guarantee
Manufacturer's part 221-107
Probe not included. For a selection of suitable probes click here.
This Reference thermometer from ETI is a high accuracy PT100 instrument supplied with a 5-point UKAS Certificate of Calibration. Each certificate indicates deviations from standards at various check points: -18, 0, 40, 70 and 100°C.
The Reference thermometer is ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source. The instrument measures temperature over the range of -199.99 to +199.99°C with a resolution of 0.01°C. It has a simple on/off push button with open circuit 'Err' and low battery indication.
Supplied with a permanently attached, high accuracy probe incorporating a 1/10th DIN PT100 sensor
Probe measures 130 x 3.3mm and is supplied with a one metre PVC lead
With the Pro-Surface Thermapen® thermometer from ETI you can measure the temperature of grills, hotplates and other surfaces over a range of -49.9 to 299.9 °C with a user-selectable resolution of 0.1 or 1 °C. Simply open the probe and take the reading - the pivoting probe and swivel tip ensure perfect surface contact and highly accurate measurement.
The washable ABS plastic Thermapen® body is splashproof, designed for industrial use and has no buttons to press. Swing open the probe and it's on - close it and it's off. It uses no cables and the probe's foldaway action offers protection when not in use and eliminates the need for replacement.
For high temperature use you can order a protective silicone rubber boot for added thermal and drop protection.
Pivoting probe and swivel tip for perfect contact
Auto power on/off function
Temperature reading available in just 3 seconds
2-year guarantee
Made in the UK
Dimensions 153 x 47 x 19mm
Measurement scale: Celsius and Fahrenheit
Requires 2 x CR2032 lithium coin cell batteries (supplied)
The Thermapen One thermometer is the latest model of the UK's number one selling food thermometer, Thermapen. Measuring temperature over the range of -49.9 to 299.9 °C and used by hundreds of thousands of discerning cooks worldwide, it offers a combination of speed, accuracy and convenience of use. The new Thermapen One uses advanced technology and includes a number of innovative features illustrated below.
The Thermapen One is fully configurable using buttons in the battery compartment. Here you can choose to lock the display position, disable auto-sleep mode, choose °C or °F scales and select 1° or 0.1° resolution.
The patented 360° self-rotating display can be used in any position, in either hand and is truly ambidextrous. The Thermapen One incorporates an intelligent backlit display sensing light levels, automatically turning the backlight on/off in varying light conditions. The motion-sensing sleep mode with user changeable time delay automatically turns the Thermapen on/off when set down or picked up, maximising battery life.
The casing is washable and includes Biomaster Anti-Microbial Technology that reduces bacterial growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
As well as being waterproof to IP67, it is 'probably' the fastest reading contact thermometer on the market today. The true temperature of a product can be tested in just one second. The Thermapen One incorporates a reduced tip, stainless steel, food penetration probe (Ø3.3 x 110 mm) that conveniently folds back through 180° into the side of the instrument when not in use.
The Thermapen One is powered by a single AAA battery with a life expectancy of 2000 hours in normal use, without the backlight. Both low battery (icon) and open circuit indication are displayed, when applicable. Each Thermapen One is supplied with a FREE traceable certificate of calibration.
Thermapen® is a registered trademark in the UK (2025607), EU (008449571) and the USA (3898535). It is also protected by German Utility Patent DE202013103605 (U1), EC Regd.Des.No. 002535161-0003 and EC Regd.Des.No. 002535161-0005. The automatic 360° rotational display is protected by UK Patent No. GB 2504936 and USA Patent No. US 9470560
Colour: black
Reaches temperature in just 1 second
Made in the UK
5-year guarantee
Measurement scale: Celsius and Fahrenheit
IP67 protection
Dimensions: 48.2mm x 156.2mm x 19.3mm
Requires 1 x AAA battery (supplied)
Battery life: 2000 hours (without backlight), 100 hours backlight on time
The MicroCal 1 Plus thermocouple calibrator from ETI helps ensure the frequent checking of thermometer accuracies is a routine operation. The calibrator is designed to simulate a chosen temperature to test thermocouple types K, J, T, R, N, S and E thermometers without the need for specialised equipment or conversion tables. The simulator features a custom 10mm LCD display with alpha-numeric display line to prompt the user when changing parameters. Selectable parameters include: °C/°F, auto power off - enable/disable, CJC - internal/external and display contrast adjustment.
Supplied with a one-metre PVC type K thermocouple lead with miniature connectors and a five point (type K) UKAS Certificate of Calibration which indicates deviations from standards at the various points.
Designed for frequent checking of thermometer accuracies
This digital thermometer from ETI simultaneously displays the actual temperature while also displaying maximum and minimum readings and is ideal for recording temperatures in the office, factory, laboratory, home, greenhouse or conservatory.
It is extremely easy to use. To switch the current reading between °C and °F or reset the recorded max/min temperatures simply press the button on the side of the unit.
Measures temperature between -20 and +69.9°C with a 0.1°C/°F resolution
Housed in ABS plastic case measuring 29 x 79 x 187mm
It looks like a plate for good reason. The DishTemp® dishwasher thermometer from ETI simulates a plate as it's cleaned and sanitised in a commercial dishwasher, accurately recording the maximum surface temperature at the touch of a button. This thermometer eliminates the need for costly and inaccurate test strips that don't stay in place and don't record temperature at the plate surface.
Built to survive daily use in professional kitchens, the DishTemp indicates temperature within a range of 0 and 90°C with a resolution of 0.1° and an accuracy of ±0.5°C. Incorporating a durable water-tight seal, this unit is waterproof to IP66 and is supplied complete with a traceable certificate of calibration.
Displays maximum temperature reached
Simulates plate surface temperature
Made in the UK
Dimensions 127 x 14mm
Measurement scale: Celsius and Fahrenheit
Battery life 5000 hours
1 year guarantee
Manufacturer's part 810-280
Requires 1 x CR2032 lithium coin cell battery (supplied).
A versatile, multi-function digital thermometer with an attached probe, ideal for restaurants, bars and cafes.
The thermometer has several useful features such as Measurement Hold, Maximum and Minimum readings, a high/low temperature audible alarm and selectable Centigrade or Fahrenheit display.
A very useful calibration feature allows the thermometer to be adjusted to agree with a known-good thermometer or another thermometer that has been laboratory calibrated.
The Multi-Function thermometer's housing and probe handle includes Biomaster Antimicrobial Technology that reduces bacterial growth.
Each unit is supplied with a stainless steel, food penetration probe (Ø3.5 x 125mm) with one metre PVC connecting lead, pocket clip and probe cover.
The infrared thermometer Comparator from ETI provides an inexpensive way of checking infrared hand held thermometers when used in conjunction with a Reference thermometer. The Comparator consists of an aluminium cup measuring Ø60 x 100mm with a solid matt black base. The base incorporates two Ø3.5mm holes, one for a Reference thermometer's probe and the other for an additional probe, if required.
The Comparator can be used at any ambient temperature between 5 and 80°C. The information from the Reference thermometer can be used to compensate for minor differences in the readings from the test instrument. As a result, only instruments with unacceptable errors need to be returned to the supplier for re-calibration or certification.
The Extech Instruments TM20 is a Waterproof, Portable, Wall Mountable Temperature Indicator. This indicator has been designed and manufactured for measuring the temperature of air, liquid, paste, or semi-solid materials. The TM20 uses a standard temperature probe.
The TM20 comes with a removable foot and magnetic back. It can easily be used on your desktop or mounted on any metal surface. This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Applications: Laboratories, Calibration Labs, Cold Chain Facilities/Vehicles, Healthcare Offices Storage Areas and Warehouses.
What's in the Box?TM20 Temperature IndicatorStandard probeFoot standCR2032 button batteryOperating instructions
Audible and visual alarm alerts when temperature level is higher or lower than the user programmed
High/Low set points
Fast response sensor measures temperature in liquids, semi-solids, and air
LCD displays Temperature reading, alarm indicator and high or low alarm icons
Displays Min/Max reading with reset function
Data Hold freezes current reading on display
Low battery indication
Magnetic back and can be mounted on a metal surface, used on a desktop with included foot stand, or can be wall mounted
Waterproof housing and sensor designed to meet IP65
Dimensions: 86(L) x 57(H) x 30(D)mm
Weight: 90g
Sensor measures Temperature from -40°F to +158°F (-40°C to +70°C)
Supplied with standard probe measuring 20mm with a 2.9m long cable
A Faithfull high-precision digital electronic thermometer, for use in both industrial and domestic applications where accurate temperature readings are required. Ideal for use in laboratories for temperature testing and monitoring and essential for use when preparing cooked foods such as meat, poultry, infant milk and many other foods when accurate temperature readings are necessary.
This thermometer can be set for either Celsius or Fahrenheit measurement, maximum or minimum readings and has a useful data hold facility. The easy-clean stainless steel probe features a sharp point with a Slimline design allowing effortless penetration of meats and provides a fast response time when taking readings. The large LCD digital display is easy to read and has an automatic power off function when not in use. The thermometer is supplied in with a probe cover for safe storage when not in use.
Features:Clear easy-to-read LCD display.Celsius or Fahrenheit readout.Data hold facility.Stainless Steel slimline easy clean probe.1.5V LR44 battery included.Pocket size.Automatic power off function.Probe cover for safe storage.
SPECIFICATION:Measuring Range (Probe): Celsius Temperature: -40°C to 250°C.Fahrenheit Temperature: -40°F to 482°F.Operating Temperature: 0°C (32°F) to 50°C (122°F).
This attractive and practical wall-mounted thermometer is ideal for the home, conservatory, office or factory. Graduations are clearly marked on a silver plate which is set in a sturdy beech wood casing.
Measures temperature in both Celsius and Fahrenheit. Mercury free.
Based on a traditional design, the Faithfull Digital Max-Min Thermometer offers the convenience of both digital and standard capillary thermometers. Double capillary thermometers provide an instant and accurate reading of the surrounding environment in both Centigrade and Fahrenheit.
The thermometer features a large, easy to read LED display that records and shows the highest and lowest temperatures reached throughout the day and night since its last reset. The display can easily be switched between Centigrade and Fahrenheit depending on preference and can be instantly reset to the current temperature at the press of a single button.
This is the ideal instrument for measuring and recording the temperature of greenhouses, conservatories or any room around the home. The thermometer can be used free standing or hung and is suitable for both indoor and outdoor use and is mercury free.
Uses 1 x AAA battery.Range: -40°C to +50°C / -40°F to +120°F
This Faithfull Wall Thermometer is mercury free. A simple white plastic wall thermometer for everyday use in and around the home and garden. It measures temperature in both Celsius and Fahrenheit and is suitable for indoor or outdoor use. It is also ideal also for checking the temperature of fridges. Range: -30°C to +50°C / -20°F to +120°F.
This Faithfull Stick-On Window Thermometer is a simple but effective thermometer which sticks directly onto the outside of a window with the adhesive pads supplied. The outside temperature can then be read while you are indoors. Mercury free.Range: -50°C to +50°C.
The Greisinger GMH 3710 is a Precision Thermometer for the measurement of the temperature with exchangeable 4-wire Pt100 temperature sensors. With high resolution and precision temperature values can be measured from -200°C to +850°C.
Highest accuracy and resolution (0.01°C)
Suitable for all Pt100 4-wire probes with 4-pin miniature DIN-plug
Freely adjustable analogue output 0 to 1V or serial interface
The Labfacility L200TC Thermocouple Thermometer / Temperature Logger can be used in conjunction with a PC to provide accurate, versatile 8 channel temperature measurement, scanning and logging of measured values.
It can be used as stand-alone indicator or logger and incorporates a digital display of measured temperature. The in-built, self-calibration facility is a rapid and convenient method for on-site calibration and does not require any additional equipment other than a special, external link.
The L200TC is designed to provide exceptional stability, with high measurement resolution, and represents an ideal crossover between plant practicality and laboratory performance at a very competitive price. The PC software supplied with the instrument allows Control, Measure and Calibration functions.
Simple operation
Low cost, high performance
USB PC interface
8 thermocouple inputs, types J, K, T, E ,N ,R, S & B
Built-in continuous display for a single channel or auto-scrolling display for all channels
Resolution 0.1°C on L200 display, 0.01°C in software
Self-calibration feature
Select °C or °F
PC software included for remote control and measure, logging and calibration
The Labfacility L200PT Pt100 (3-wire) Thermometer / Temperature Logger can be used in conjunction with a PC to provide accurate, versatile 8 channel temperature measurement, scanning and logging of measured values.
It can be used as stand-alone indicator or logger and incorporates a digital display of measured temperature. The in-built, self-calibration facility is a rapid and convenient method for on-site calibration and does not require any additional equipment other than a special, external link.
The L200PT is designed to provide exceptional stability, with high measurement resolution, and represents an ideal crossover between plant practicality and laboratory performance at a very competitive price. The PC software supplied with the instrument allows Control, Measure and Calibration functions.
Simple operation
Low cost, high performance
USB PC interface
8 Pt100 (3 wire) inputs
Built-in continuous display for a single channel or auto-scrolling display for all channels
Resolution 0.1°C on L200 display, 0.01°C in software
Self-calibration feature
Select °C or °F
PC software included for remote control and measure, logging and calibration
This temperature meter from Testo provides an accurate means of carrying out temperature measurements at temperatures as low as -50°C and is ideal for use in cold storage rooms and warehouses.
With a large, crisp, two-line display, user-defined thresholds, audible alarm alerts and min/max value recognition, you can count on the Testo 110 to provide you with precise and reliable results.
A wide range of optional NTC sensors to suit your individual requirements are available.
What's in the Box?Testo 110 digital temperature meterCertificate of Conformity9V (PP3 type) battery
Temperature measuring range: -50 to +150°C (accuracy ±0.3°C, resolution: 0.1°C)
Storage temperature: -40 to +70°C
Weight: 171g
Dimensions: 182 x 64 x 40mm
Operating temperature: -20 to +50°C
Housing: ABS
Number of channels: 1
Standards: EN 13485
Warranty: 2 years
Battery type: 9V
Manufacturer's part: 0560 1108
Please note: You will need a temperature sensor to use this meter. The accuracy of your measurements depends on the accuracy of the sensor and the accuracy of your meter.
When it comes to temperature measurements at widely spaced measuring points in particular, the 115i Smartprobe Bluetooth clamp thermometer from Testo makes things much easier - thanks to a wireless connection to the smartphone or tablet.
When used in conjunction with the Testo 549i pressure measuring instrument, individual refrigeration system parameters can also be calculated.
Measurement data is transmitted wirelessly from the clamp thermometer to the testo Smart Probes App and can be viewed conveniently on your smartphone or tablet - either as a chart or in table form. Temperature changes are therefore immediately evident. The measurement data log can be emailed directly as a PDF or Excel file.
Measuring range: -40 to +150°C
Accuracy: ±1.3 °C (-20 to +85°C)
Resolution: 0.1°C
Temperature sensor: NTC
Operating temperature: -20 to +50°C
Battery type: 3x AAA
Battery life: 250 hours
Dimensions: 183 x 90 x 30mm
System requirements: iOS 8.3 or newer / Android 4.3 or newer, mobile device with Bluetooth 4.0
This 2 channel differential temperature measuring instrument from Testo is perfect for tests which require two simultaneous measurements and to display the "delta" or temperature difference. The attachable temperature probes (type K thermocouple) enable fast temperature checks and a large temperature measuring range from -50 to +1000°C (the measuring range is dependent on the probe type selected).
What's in the Box?2-channel temperature measuring instrument 1x 9V batteryCertificate of Conformity
Large, illuminated display
Acoustic alarm when limit values are exceeded
Ideally suited for applications in the HVAC field
2-channel temperature measuring instrument with optional wireless probes
This temperature measuring instrument from Testo is a great all-rounder for measurement in heating engineering, sanitation, refrigeration and air conditioning technology. With its attachable temperature probes (type K thermocouple) this instrument can provide fast temperature checks within a large temperature measuring range from -50 to +1000°C.
What's in the Box?1-channel Type K thermocouple thermometer1x 9V BatteryCertificate of Conformity
The Testo 922 temperature measuring instrument is ideal for measuring differential temperature in the sanitary and HVAC/R sector. The 2-channel temperature measuring instrument measures 2 temperatures in parallel and can determine the differential temperature in a matter of seconds. Once the measurement is complete, you can safely store your equipment in the handy bag supplied.
The set also includes two surface temperature probes for pipe-work with Velcro fasteners. The probes are ideal for pipes with diameters of up to 120mm. The thermocouple sensor for measuring temperature is attached to a 20mm wide, 395mm long strip and has a 1.5m cable.
Temperature inputs 2x - TC Type K (NiCr-Ni)
Measuring range: -50 to +1000°C
Accuracy: ±(0.5°C + 0.3% of mv) (-40 to +900°C), ±(0.7°C + 0.5% of mv) (remaining ranges), ±0.1°C (-50 to +199.9°C)
Resolution: 0.1°C (-50.0 to 199.9°C), 1°C (remaining ranges)
This digital thermometer from TFA is ideal for measuring both indoor and outdoor temperatures. The device can be wall mounted or table standing and gives the following readings: indoors: -10 to +50°C; outside: -40 to +70°C.
This solar pool thermometer from TFA has been designed so you can simply lay it in the pool and secure at the border with the cord, allowing convenient reading of water temperature without going in the water. Features include: reversible °C/°F, maximum/minimum function and waterproof.
Floats in water
With fixing cord
Reading range - outdoor temperature: 20up to + 50 °C
Accuracy: 1°C
Station power supply: Solar cell, Optional, LR44 button cell, included
This solar window thermometer from TFA has a large display with solar lighting via a light sensor and time switch, for outdoor temperature, maximum and minimum values with auto reset, time and remains weather resistant. The battery for time-controlled, automatic lighting is charged with solar energy, power is supplied to the thermometer through a battery.
With 3M-adhesive strips
Can be removed for cleaning the window
Min.-/max.storage with automatic reset
Automatic backlighting at night
122 x 28 x 131mm
Includes. 1x AAA battery and 1x AAA rechargeable battery
The Voltcraft DT-300 measures temperatures even under the most difficult conditions. It is suitable for applications in moist surroundings and outdoors. It has a fast response time and comprehensive features.
The penetration sensor for soft plastic media is fixed permanently by means of an 80cm long wire and can be plugged on the device.
Data hold, min./max.-measurements
Sensor length: 144cm
C/F switchover
Adjustable alarm values
Measurement range from -50°C to +300°C
Splash water protected
Supplied with penetration sensor, 2x AAA batteries and operating instructions
The Voltcraft K101 Digital Hand Held Thermometer offers an economical entry in the professional temperature measurement.
Both robust and precise, this high quality thermometer is ideal for the measurement of temperature by optional K-type thermocouples. All commercial K-type thermocouples can be connected to the devices via a standard blade terminal, while a selection of various thermocouples (temperature sensors) can be found in under the accessories tab. The K101 also comes with one input port for the thermocouple. The maximum temperature range for this device is –200°C to +1370°C or –328°F to +2498°F, depending upon the respective temperature sensor.
Measuring temperatures by optional K-type temperature sensors in temperature range from –200°C to +1370°C or –328°F to +2498°F
The Voltcraft K102 K Type Thermometer offers an economical entry in the professional temperature measurement. The K102 is a high-quality and robust thermometer at top price that boasts several handy features, including min.-/max.-, data hold and relative measuring function, °C/°F switching, automatic power off and ideal for K and J type sensors.
The Voltcraft K201 digital thermometer has a measurement range from -200 to +1370°C and very high accuracy fulfills the highest professional requirements. It has data hold, min./max. and mean value measurements. The LCD shows all channels at one glance or the T1 - T2 difference display in either °C or °F. It features and auto power-off function for battery saving and can be powered from a mains connection socket. Supplied with 1 x K-type thermocouples (up to 200ºC), 9V battery, bag and operating instructions.
The Voltcraft K202 digital thermometer has a measurement range from -200 to +1370°C and very high accuracy fulfills the highest professional requirements. For the long-term monitoring of processes the meter has internal storage for 16,000 measurements. It has data hold, min./max. and mean value measurements. The LCD shows all channels at one glance or the T1 - T2 difference display in either °C or °F. It features and auto power-off function for battery saving and can be powered from a mains connection socket. Supplied with 2 x K-type thermocouples (up to 200ºC), 9V battery, bag and operating instructions.
The Voltcraft K204 digital thermometer has a measurement range from -200 to +1370°C and very high accuracy fulfills the highest professional requirements. For the long-term monitoring of processes the meter has internal storage for 16,000 measurements. It has data hold, min./max. and mean value measurements. The LCD shows all channels at one glance or the T1 - T2 difference display in either °C or °F. It features and auto power-off function for battery saving and can be powered from a mains connection socket. Supplied with 2 x K-type thermocouples (up to 200ºC), 9V battery, bag and operating instructions.
The Voltcraft PL-120 T2 Thermometer is a high quality, two-channel robust thermometer for thermo-elements. The large illuminated display and the function keys arranged on the sides enable an ergonomic usage. The measured values are shown with the measurement time.
Other features include: Temperature display in °C, °F or °K Auto power-off
The Voltcraft PL-125-T2 is a Robust Thermometer with soft rubber protection for K- and J-type thermocouples.
The large illuminated display and the laterally arranged function keys allow for ergonomic operation. Since the device is equipped with a real-time clock, the MIN / MAX / AVG values can be read with a time stamp, making long-term monitoring much easier.
In addition to the supplied wire sensors (1 pc per channel) all K- and J-type temperature sensor can be connected with miniature thermocouple plug.
Applications: Ideal for use in laboratories and industrial areas.
What's in the Box?2x K-type wire sensor (-20°C to +250°C) 3x batteries (AAA) USB cable Volt Soft Standard software CD Operating instructions
Accuracy (±) °C: 1°C
Basic accuracy (±): 0.15%
Dimensions, height: 28mm
Dimensions, length: 162mm
Dimensions, width: 62mm
Max. temperature: +1372°C
Min. temperature: -200°C
2 channels
For K/ J-type thermocouples
MAX/ MIN/ AVG with timestamp
Data logger for 18000 measurements
USB interface
Temperature display in °C, °F or °K
Auto Power Off function
Differential measurement (T1-T2)
Power supply: 3x AAA batteries
Resolution (temperature): 0.1°C
Weight: 184g
System Requirements: .Net Framework V2.0 or later, Windows®XP SP2 / Windows Vista/ Windows 7/8/ 8.1, CD drive and USB interface
The Voltcraft PL-125-T4 is a 4-Channel Digital Thermometer. It has been designed for temperature measurement and is especially suitable for use in laboratories and industrial areas.
The temperature measurement is done via one to four temperature sensor(s). The temperature can be measured with temperature sensors of type K and J. The measured values can be frozen on the screen.
The product can display the minimum, maximum and average value of a particular measurement process, and can be displayed in °C (Celsius), °F (Fahrenheit) or °K (Kelvin).
The product features an auto-off and a backlight function. It can also calculate the difference between the measured values T1/ T3 and T2, T3 and T4 and provide the maximum, minimum and average difference of the measured values T1/ T3 and T2, T3 and T4. The power is supplied by 3x AAA batteries (supplied).
What's in the Box?Voltcraft PL-125-T4Temperature sensor (K-type) x 4USB cable3x AAA batterySoftware CDOperating instructions
Temperature display in °C, °F or °K
4 channels
MAX/MIN/AVG with time stamp
Accuracy (±) °C: 1°C
Basic accuracy (±): 0.15%
Dimensions, height: 28mm
Dimensions, length: 162mm
Dimensions, width: 62mm
Max. temperature: +1372°C
Min. temperature: -200°C
Optional calibration to: ISO/DAkkS
Power supply: 3x AAA battery
Sensor type: K, J
Data hold for 18000 measurement values
USB interface
Auto Power-Off
Weight: 184g
System requirements: Pentium 233MHz or faster, at least 1 Gbyte RAM, at least 2 Gbyte of available space on the hard disk, USB 2.0/ 3.0 Port(s), Microsoft, Windows XP SP2/ Vista SP2/ 7
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.
The Circuits Shop
