The TracoPower TME series of sub-miniature isolated 1W DC-DC converters require just 0.7cm² of PCB space and provide a cost-effective solution to generate supplementary isolated voltages.

• Case type: SIL 4
• Dimensions, length: 11.5mm
• Dimensions, width: 7mm
• Input voltage: (±10 %) 5V DC
• mains control: (at 1 % variation Vin) max. ±1.2 %
• No. of outputs: 1
• Operating temperature range: -40 - +85 °C
• Output current: 200mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 1W
• Residual ripple: (20 MHz Bandwidth) typ. 150 Vpp
• Type: TME 0505S
• Manufacturer's part TME 0505S

The TracoPower TME series of sub-miniature isolated 1W DC-DC converters require just 0.7cm² of PCB space and provide a cost-effective solution to generate supplementary isolated voltages.

• Case type: SIL 4
• Dimensions, length: 11.5mm
• Dimensions, width: 7mm
• Input voltage: (±10 %) 5V DC
• mains control: (at 1 % variation Vin) max. ±1.2 %
• No. of outputs: 1
• Operating temperature range: -40 - +85 °C
• Output current: 80mA
• Output voltage: 12V DC
• Output voltage 1: 12V DC
• Power: 1W
• Residual ripple: (20 MHz Bandwidth) typ. 150 Vpp
• Manufacturer's part TME 0512S

The TracoPower TME series of sub-miniature isolated 1W DC-DC converters require just 0.7cm² of PCB space and provide a cost-effective solution to generate supplementary isolated voltages.

• Case type: SIL 4
• Dimensions, length: 11.5mm
• Dimensions, width: 7mm
• Input voltage: (±10 %) 24V DC
• mains control: (at 1 % variation Vin) max. ±1.2 %
• No. of outputs: 1
• Operating temperature range: -40 - +85 °C
• Output current: 200mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 1W
• Residual ripple: (20 MHz Bandwidth) typ. 150 Vpp
• Manufacturer's part TME 2405S

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 76 %
• Input voltage: 5V DC
• Insulation voltage: 1000V DC
• No. of outputs: 1
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: 400mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 2W
• Manufacturer's part TMH 0505S

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 80 %
• Input voltage: 5V DC
• Insulation voltage: 1000V DC
• No. of outputs: 1
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: 165mA
• Output voltage: 12V DC
• Output voltage 1: 12V DC
• Power: 2W
• Manufacturer's part TMH 0512S

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 80 %
• Input voltage: 5V DC
• Insulation voltage: 1000V DC
• No. of outputs: 1
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: 130mA
• Output voltage: 15V DC
• Output voltage 1: 15V DC
• Power: 2W
• Manufacturer's part TMH 0515S

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 82 %
• Input voltage: 12V DC
• Insulation voltage: 1000V DC
• No. of outputs: 2
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: ±80mA
• Output voltage: ±12V DC
• Output voltage 1: +12V DC
• Output voltage 2: -12V DC
• Power: 2W
• Manufacturer's part TMH 1212D

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 82 %
• Input voltage: 12V DC
• Insulation voltage: 1000V DC
• No. of outputs: 1
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: 165mA
• Output voltage: 12V DC
• Output voltage 1: 12V DC
• Power: 2W
• Manufacturer's part TMH 1212S

These ultra-miniature isolated 2W DC-DC converters from the TracoPower TMH series are supplied in a Single-In-Line package with industry-standard pinouts and are ideal for board level power distribution applications where space is a critical factor.

• Control deviations: input change unregulated, last updated max ±10 %
• Ripple: (20 MHz bandwidth) typ. 75 mV _pk-pk (5 V-input)/typ. 150 mV _pk-pk (12/24 V-input)
• Dimensions, length: 19.5mm
• Dimensions, width: 7.5mm
• Efficiency: 77 %
• Input voltage: 24V DC
• Insulation voltage: 1000V DC
• No. of outputs: 1
• Operating temperature range: (above 70 °C power reduction 3 %/K) -40 - +85 °C
• Output current: 400mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 2W
• Manufacturer's part TMH 2405S

Ultra compact AC/DC-power supplies from the TracoPower TML series in a fully encapsulated plastic casing. Single, dual and triple output models are available with either screw terminals for chassis mounting or solder pins for direct PCB mounting.

• Max. 120 - 180 % (foldback)
• Dimensions, height: 25mm
• Dimensions, length: 89mm
• Dimensions, width: 64mm
• Insulation voltage: 3000V AC
• Operating temperature range: -25 to +71 °C
• Output current 1: 1250mA
• Output voltage 1: 24V
• Power: 30W
• Protection class: II
• Residual ripple: max 1.5 %
• Manufacturer's part TML 30124

These AC/DC power modules from the TracoPower TMLM series offer high power density in a fully encapsulated module which can be soldered directly onto a PCB. These modules are ideal for use in industrial electronic equipment where space is at a premium.

• Dimensions, height: 17mm
• Dimensions, length: 37mm
• Dimensions, width: 27mm
• Input frequency: 47 - 440 Hz
• Output current 1: 1200mA
• Output voltage 1: 3.3 V
• Power: 4W
• Manufacturer's part TMLM 04103

These AC/DC power modules from the TracoPower TMLM series offer high power density in a fully encapsulated module which can be soldered directly onto a PCB. These modules are ideal for use in industrial electronic equipment where space is at a premium.

• Dimensions, height: 17mm
• Dimensions, length: 37mm
• Dimensions, width: 27mm
• Input frequency: 47 - 440 Hz
• Output current 1: 800mA
• Output voltage 1: 5 V
• Power: 4W
• Manufacturer's part TMLM 04105

These AC/DC power modules from the TracoPower TMLM series offer high power density in a fully encapsulated module which can be soldered directly onto a PCB. These modules are ideal for use in industrial electronic equipment where space is at a premium.

• Dimensions, height: 17mm
• Dimensions, length: 37mm
• Dimensions, width: 27mm
• Input frequency: 47 - 440 Hz
• Output current 1: 333mA
• Output voltage 1: 12 V
• Power: 4W
• Manufacturer's part TMLM 04112

These AC/DC power modules from the TracoPower TMLM series offer high power density in a fully encapsulated module which can be soldered directly onto a PCB. These modules are ideal for use in industrial electronic equipment where space is at a premium.

• Dimensions, height: 17mm
• Dimensions, length: 37mm
• Dimensions, width: 27mm
• Input frequency: 47 - 440 Hz
• Output current 1: 167mA
• Output voltage 1: 24 V
• Power: 4W
• Manufacturer's part TMLM 04124

These AC/DC power modules from the TracoPower TMLM series offer high power density in a fully encapsulated module which can be soldered directly onto a PCB. These modules are ideal for use in industrial electronic equipment where space is at a premium.

• Dimensions, height: 24mm
• Dimensions, length: 53mm
• Dimensions, width: 27mm
• Input frequency: 47 - 440 Hz
• Output voltage 1: 12 V
• Manufacturer's part TMLM 20112

These ultra compact AC/DC power modules from the TracoPower TMP series are fully encapsulated and are available either for chassis mount via screw terminal blocks or for direct PCB mounting.

• Connection: Screw terminals
• Dimensions, height: 24mm
• Dimensions, length: 96mm
• Dimensions, width: 54mm
• Input voltage range: 90 - 264V AC/120 - 370V DC
• Max. temperature: 70 °C
• Min. temperature: -25 °C
• No. of outputs: 3
• Output current 1: 2000mA
• Output current 2: 150mA
• Output current 3: 150mA
• Output voltage 1: 5V DC
• Output voltage 2: +15V DC
• Output voltage 3: -15V DC
• Power: 15W
• Manufacturer's part TMP 15515C
• Weight: 162 g

These ultra compact AC/DC power modules from the TracoPower TMP series are fully encapsulated and are available either for chassis mount via screw terminal blocks or for direct PCB mounting.

• Connection: Soldering pins
• Dimensions, height: 22mm
• Dimensions, length: 89mm
• Dimensions, width: 64mm
• Input voltage range: 90 - 264V AC/120 - 370V DC
• Max. temperature: 70 °C
• Min. temperature: -25 °C
• No. of outputs: 3
• Output current 1: 3000mA
• Output current 2: 500mA
• Output current 3: 500mA
• Output voltage 1: 5V DC
• Output voltage 2: +15V DC
• Output voltage 3: -15V DC
• Power: 30W
• Manufacturer's part TMP 30515
• Weight: 177 g

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 4.5 - 9V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 1
• Operating temperature range: -40 - +75 °C
• Output current: 400mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 0511

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 4.5 - 9V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 2
• Operating temperature range: -40 - +75 °C
• Output current: ±200mA
• Output voltage: ±5V DC
• Output voltage 1: +5V DC
• Output voltage 2: -5V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 0521

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 9 - 18V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 2
• Operating temperature range: -40 - +75 °C
• Output current: ±83mA
• Output voltage: ±12V DC
• Output voltage 1: +12V DC
• Output voltage 2: -12V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 1222

TracoPower TMR 2WI series DC/DC-converters have 2 W output power, regulated outputs and an ultra-wide 4:1 input range of 9-36 VDC or 18-75 VDC, and are supplied in an ultra-compact SIL-9 plastic casing. These ultra-compact converters can be used in battery-operated devices, decentralised power supplies in industrial and communication systems.

• Dimensions, length: 26mm
• Dimensions, width: 9.3mm
• Efficiency: 80 %
• Input voltage: 9 - 36V DC
• Insulation voltage: 1500V DC
• No. of outputs: 1
• Operating temperature range: -40 - +75 °C
• Output current: 400mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 2W
• Manufacturer's part TMR 2-2411WI

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 18 - 36V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 1
• Operating temperature range: -40 - +75 °C
• Output current: 400mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 2411

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 18 - 36V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 2
• Operating temperature range: -40 - +75 °C
• Output current: ±83mA
• Output voltage: ±12V DC
• Output voltage 1: +12V DC
• Output voltage 2: -12V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 2422

The TracoPower TMR 3 series offers insulated, regulated 3W DC-DC converters with a wide 2:1 input range supplied in an ultra-compact SIL-8 housing. These converters are suitable for a number of applications in telecommunications, industrial and communication systems, where space is a critical factor.

• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 9 - 18V DC
• Insulation voltage: 1500V DC
• No. of outputs: 2
• Operating temperature range: -40 - +70 °C
• Output current: ± 125mA
• Output voltage: 12V DC
• Output voltage 1: +12V DC
• Output voltage 2: -12V DC
• Power: 3W
• Manufacturer's part TMR 3-1222

The TMR-3WI 3 series from TracoPower offers insulated, regulated 3W DC-DC converters with an extended 4:1 input range. These modules are supplied in a compact SIL-8 plastic casing and are ideal for a number of applications where space is critical.

• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Efficiency: 82 %
• Input voltage: 9 - 36V DC
• Insulation voltage: 1500V DC
• No. of outputs: 2
• Operating temperature range: -40 - +85 °C
• Output current: ± 100mA
• Output voltage: 15V DC
• Output voltage 1: +15V DC
• Output voltage 2: -15V DC
• Power: 3W
• Manufacturer's part TMR 3-2423WI

These regulated 2W DC-DC converters from the TracoPower TMR 2 series are supplied in a miniature SIL casing and have a wide 2:1 input range. They are suitable for a wide range of applications in communication, control units and industrial equipment.

• Case type: SIL
• Dimensions, length: 21.8mm
• Dimensions, width: 9.2mm
• Input voltage: 36 - 75V DC
• Insulation voltage: I/O 1000V DC
• Mains control: max. ±0.5 %
• No. of outputs: 1
• Operating temperature range: -40 - +75 °C
• Output current: 167mA
• Output voltage: 12V DC
• Output voltage 1: 12V DC
• Power: 2W
• Residual ripple: (20 MHz BW) < 50 Vpp
• Manufacturer's part TMR 4812

The TracoPower TMR 6-1212 is an Isolated 6W DC/DC Converter Module with a regulated output. The converter has a wide 2:1 input voltage range and is supplied in an ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0cm² (0.3 square in.) of board space.

The excellent efficiency allows -40°C to +65°C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of this converter makes it an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics.

• Highest power density
• Wide 2:1 input voltage range
• Ultra-compact SIP-8 package
• Smallest footprint 6W converter
• Full SMD design
• Temperature range -40°C to +65°C
• High efficiency up to 86%
• Indefinite short-circuit protection
• I/O isolation 1500VDC
• Remote On/Off control
• Fully RoHS compliant
• 3-year product warranty
• Supplied with an Output Power of 6A
• Supplied with a wide Input Voltage range of 9 to 18VDC
• Supplied with an Output Voltage of 12VDC
• Supplied with an Output Current of 500mA
• Manufacturer's part: TracoPower TMR 6-1212

The TracoPower TMR 6-2412 is an Isolated 6W DC/DC Converter Module with a regulated output. The converter has a wide 2:1 input voltage range and is supplied in an ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0cm² (0.3 square in.) of board space.

The excellent efficiency allows -40°C to +65°C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of this converter makes it an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics.

• Highest power density
• Wide 2:1 input voltage range
• Ultra-compact SIP-8 package
• Smallest footprint 6W converter
• Full SMD design
• Temperature range -40°C to +65°C
• High efficiency up to 86%
• Indefinite short-circuit protection
• I/O isolation 1500VDC
• Remote On/Off control
• Fully RoHS compliant
• 3-year product warranty
• Supplied with an Output Power of 6A
• Supplied with a wide Input Voltage range of 18 to 36VDC
• Supplied with an Output Voltage of 12VDC
• Supplied with an Output Current of 500mA
• Manufacturer's part: TracoPower TMR 6-2412

These TracoPower TSM series 1W isolated DC-DC converters are particularly suitable for use in automated SMD production. They are available in single and dual output versions.

• Case type: SOIC 14
• Efficiency: 80 %
• Input voltage: (±10 %) 5V DC
• Load control (%): max ± 10 %
• Mains control: (at 1 % variation of Vin) max. ±1.2 % %
• No. of outputs: 1
• Operating temperature range: -40 - +85 °C
• Output current: 200mA
• Output voltage: 5V DC
• Output voltage 1: 5V DC
• Power: 1W
• Residual ripple: (20 MHz BW) < 120 Vpp
• Manufacturer's part TSM 0505S

These TracoPower TSM series 1W isolated DC-DC converters are particularly suitable for use in automated SMD production. They are available in single and dual output versions.

• Case type: SOIC 14
• Efficiency: 80 %
• Input voltage: (±10 %) 5V DC
• Load control (%): max ± 10 %
• Mains control: (at 1 % variation of Vin) max. ±1.2 % %
• No. of outputs: 1
• Operating temperature range: -40 - +85 °C
• Output current: 80mA
• Output voltage: 12V DC
• Output voltage 1: 12V DC
• Power: 1W
• Residual ripple: (20 MHz BW) < 120 Vpp
• Manufacturer's part TSM 0512S

These TracoPower TSM series 1W isolated DC-DC converters are particularly suitable for use in automated SMD production. They are available in single and dual output versions.

• Case type: SOIC 18
• Efficiency: 79 %
• Input voltage: (±10 %) 5V DC
• Load control (%): max ± 10 %
• Mains control: (at 1 % variation of Vin) max. ±1.2 % %
• No. of outputs: 2
• Operating temperature range: -40 - +85 °C
• Output current: ±30mA
• Output voltage: ±15V DC
• Output voltage 1: +15V DC
• Output voltage 2: -15V DC
• Power: 1W
• Residual ripple: (20 MHz BW) < 120 Vpp
• Type: TSM 0515D
• Manufacturer's part TSM 0515D

These high performance DIN rail power supplies from TracoPower's TSPC series are designed for use in harsh industrial environments. These units are easy to install and represent a reliable solution for basic applications.

• Connections: Screw terminals
• Dimensions, height: 110mm
• Dimensions, width: 46mm
• Input voltage range: 85-132 / 187-264V AC
• No. of phases: 1
• Nominal input voltage: 115V AC, 230V AC
• Output current: 5A
• Output voltage: 24V DC
• PSU type: Switched Mode
• Power: 120W
• Manufacturer's part TSPC 120-124
• Weight: 500 g

These high performance DIN rail power supplies from TracoPower's TSPC series are designed for use in harsh industrial environments. These units are easy to install and represent a reliable solution for basic applications.

• Connections: Screw terminals
• Dimensions, height: 110mm
• Dimensions, width: 60mm
• Input voltage range: 85-132 / 187-264V AC
• No. of phases: 1
• Nominal input voltage: 115V AC, 230V AC
• Output current: 10A
• Output voltage: 24V DC
• PSU type: Switched Mode
• Power: 240W
• Manufacturer's part TSPC 240-124
• Weight: 750 g

The TracoPower TSP-REM360 module can be used for setting up a redundant supply system using two power supplies in the TSP series.

• Connections: Screw connectors
• Dimensions, height: 110mm
• Dimensions, width: 35mm
• Input voltage range: 24 - 27V DC
• Nominal input voltage: 24 V/DC
• Output power: 2 x 360W
• Output voltage: 24V DC
• Power: 2 x 360W
• Manufacturer's part TSP-REM360

The TracoPower 1W DC-DC Converter Vin: 15-32VDC to Vout: 12VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower 1W DC-DC Converter Vin: 18-32VDC to Vout: 15VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower 1W DC-DC Converter Vin: 4.75-32VDC to Vout: 1.8VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower 1W DC-DC Converter Vin: 4.75-32VDC to Vout: 2.5VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower 1W DC-DC Converter Vin: 5.5-32VDC to Vout: 3.3VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower 1W DC-DC Converter Vin: 6.5-32VDC to Vout: 5 VDC 1A is a TSR-1 Series step-down switching regulator that acts as a drop-in replacement for inefficient 78xx linear regulators. A high efficiency up to 96% allows full load operation up to +60°C ambient temperature without the need of any heat-sink or forced cooling.

The TSR-1 switching regulator provides other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of 2mA and no requirement of external capacitors. The high efficiency and low standby power consumption make this regulator an ideal solution for many battery powered applications.

The TracoPower TSR 3-1250 is a 3A DC/DC Converter from the TSR-3 Series. This converter is a non isolated step down switching regulator that can also be operated with a negative output voltage.

The converter is supplied in a very compact open frame package of 15.5 x 9.4 x 6.2mm. The high efficiency of up to 95% admits a full load operation up to 50°C and up to 85°C with 50% current reduction. It also has a low standby current and a wide input range. As the converter does not need a heatsink, this gives it a significant advantage over linear regulators.

Together with a remote On/Off input and protection against short circuit and over temperature this converter is the ideal load regulator for high reliable and energy critical applications.

• High performance 3A switching regulator
• Suitable for positive and negative output circuit
• High efficiency up to 95%
• Adjustable output voltages
• Over-temperature protection
• Short circuit protection
• Remote On/Off input
• Low output ripple and noise
• 3-year product warranty
• Supplied with an Output Current of 3A
• Supplied with a Wide input voltage range of 4.5 to 14VDC
• Supplied with an Adjustable Output Voltage of 0.59 to 6.0VDC
• Manufacturer's part: TracoPower TSR 3-1250

The TracoPower TSR 3-24150 is a 3A DC/DC Converter from the TSR-3 Series. This converter is a non isolated step down switching regulator that can also be operated with a negative output voltage.

The converter is supplied in a very compact open frame package of 15.5 x 9.4 x 6.2mm. The high efficiency of up to 95% admits a full load operation up to 50°C and up to 85°C with 50% current reduction. It also has a low standby current and a wide input range. As the converter does not need a heatsink, this gives it a significant advantage over linear regulators.

Together with a remote On/Off input and protection against short circuit and over temperature this converter is the ideal load regulator for high reliable and energy critical applications.

• High performance 3A switching regulator
• Suitable for positive and negative output circuit
• High efficiency up to 95%
• Adjustable output voltages
• Over-temperature protection
• Short circuit protection
• Remote On/Off input
• Low output ripple and noise
• 3-year product warranty
• Supplied with an Output Current of 3A
• Supplied with a Wide input voltage range of 10 to 30VDC
• Supplied with an Adjustable Output Voltage of 5.0 to 15VDC
• Manufacturer's part: TracoPower TSR 3-24150

The TracoPower TSR 3-2450 is a 3A DC/DC Converter from the TSR-3 Series. This converter is a non isolated step down switching regulator that can also be operated with a negative output voltage.

The converter is supplied in a very compact open frame package of 15.5 x 9.4 x 6.2mm. The high efficiency of up to 95% admits a full load operation up to 50°C and up to 85°C with 50% current reduction. It also has a low standby current and a wide input range. As the converter does not need a heatsink, this gives it a significant advantage over linear regulators.

Together with a remote On/Off input and protection against short circuit and over temperature this converter is the ideal load regulator for high reliable and energy critical applications.

• High performance 3A switching regulator
• Suitable for positive and negative output circuit
• High efficiency up to 95%
• Adjustable output voltages
• Over-temperature protection
• Short circuit protection
• Remote On/Off input
• Low output ripple and noise
• 3-year product warranty
• Supplied with an Output Current of 3A
• Supplied with a Wide input voltage range of 10 to 30VDC
• Supplied with an Adjustable Output Voltage of 3.0 to 6.0VDC
• Manufacturer's part: TracoPower TSR 3-2450

The TracoPower TSRN 1-24150 is a Non-isolated (POL) DC/DC Converter from the TSRN-1 Series. This step-down switching regulator is a drop-in replacement for inefficient 78xx linear regulators.

A high efficiency up to 95% allows full load operation up to +70°C (+85°C with derating) ambient temperature without the need of any heat-sink or forced air cooling. The TSRN 1-24150 provides other significant features over linear regulators, i.e. better output accuracy (±2%), lower standby current of 2mA and no requirement of external capacitors.

It is suitable for both positive and negative output circuits. The high efficiency and low standby power consumption makes this regulator an ideal solution for energy sensitive applications.

• SIP-3 package fits existing TO-220 footprint
• Pin compatible with LMxx linear regulators
• Built in filter capacitors
• Operation temperature range -40°C to +85°C
• No heat-sink required
• Over-temperature protection
• Short circuit protection
• Line regulation: 0.2%
• Load regulation: 1.0% typical
• Output voltage set accuracy: 2.0% typical
• Efficiency: 85% typical
• I/O isolation voltage non-isolated
• No load input current 2.0mA typical
• Casing plastic (UL 94V-0 rated)
• Wide input range up to 42VDC
• Excellent line / load regulation
• Negative and Positive output operation
• Supplied with a positive output current of 200mA
• Supplied with a positive output voltage of 15VDC output voltage
• Manufacturer's part: TracoPower TSRN 1-24150

The Voltcraft 12/10 240W DC/DC converter enables the operation of 24V DC devices from the normal 12V DC battery of a car. It is designed for permanent installation rather than plug and go operation.

• Converts 12V DC to 24V DC
• Up to 10A output current

The Voltcraft SDC-2412-5 70W switched-mode DC/DC converter enables operation of 12V DC consumer items, such as cold bags, refrigerator boxes or cabinets and mobile HiFi units from a 24V DC battery supply system or other supply between 18 and 38V DC. The 24V DC supply is converted to 12V DC via a clocked IC-controlled circuit. This device is characterized by small dimensions and low weight compared with conventional in-line voltage transformers. The degree of efficiency is approx. 89%. Using a fanless design means the case is sealed against the ingress of dust. The device is protected against short-circuits, reverse polarity, overloads, and surges.

• High degree of efficiency >89%
• High performance 70 W
• Input voltage 18 to 38V DC
• Output voltage 13.8V DC at 5A
• Dimensions 75 x 77 x 32mm
• Weighs 190g