The ECUSB3S11 Flush Mount 1-Port USB 3.0 ExpressCard from StarTech.com lets you add a single USB 3.0 port connection to your laptop through an ExpressCard slot.

The USB 3.0 adaptor uses a unique form factor design that allows it to sit fully in a standard 34mm ExpressCard slot without sticking out. The port sits virtually flush with the sides of the laptop, enabling you to leave the card installed even while on the move, without fear of damage to the card or slot.

Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure. UASP technology optimises transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers.

The USB 3.0 ExpressCard adaptor supports data transfer rates up to 5Gbps, and is still backward compatible with USB 2.0 at up to 480Mbps, or USB 1.1/1.0 at up to 12/1.5 Mbps respectively.

This product is backed by a 2-year warranty and free lifetime technical support.

• Bus type: 34mm ExpressCard
• Connector type: ExpressCard
• External ports: USB 3.0 A (9 pin, SuperSpeed) female
• Interface type and rate: USB 3.0, 5 Gbit/s
• OS compatibility: Windows® 10, 8/8.1, 7, Vista, XP
• Ports: USB 3.0 A (9 pin, SuperSpeed) female, 1
• System and cable requirements: Available ExpressCard slot
• UASP support
• Product dimensions: 75 x 34 x 5mm
• Manufacturer's part no. ECUSB3S11

The ECUSB3S254F Flush Mount 2-Port USB 3.0 ExpressCard Adaptor from StarTech.com lets you add two USB 3.0 ports to your ExpressCard-enabled laptop.

The USB 3.0 card uses a unique design that allows it to sit flush in a standard 54mm laptop ExpressCard slot, creating a seamless add-on that can be left installed even while on the move, without having to worry about impact damage to either the card or the ExpressCard slot.

Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0. UASP technology optimises transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers.

The SuperSpeed USB 3.0 Card supports data transfer rates of up to 5Gbps, and is backward compatible with USB 2.0 (at up to 480Mbps), or USB 1.1/1.0 at up to 1.5/1.2 Mbps respectively - the perfect laptop accessory for users to connect USB devices, both new and old.

This product is backed by a 2-year warranty and free lifetime technical support.

• Bus type: 54mm ExpressCard
• External ports: USB 3.0 A (9 pin, SuperSpeed) female
• Interface type and rate: USB 3.0, 5 Gbit/s
• OS compatibility: Windows® 10, 8 / 8.1, 7, Vista, XP
• Plug type: A
• Ports: USB 3.0 A (9 pin, SuperSpeed) female, 2
• Power source: Not included (not required for standard applications)
• System and cable requirements: Available ExpressCard/54 slot
• UASP support
• Product dimensions: 74 x 54 x 5mm
• Manufacturer's part no. ECUSB3S254F

Note: UASP requires a compatible operating system.

This 4-port USB 3.0 hub from StarTech.com lets you connect both USB-C™ and USB-A peripherals to your laptop or Chromebook™, through a single USB Type-C™ or Thunderbolt™ 3 port.

With this hub you can expand your USB connection options using the USB-C port on your computer. It offers one USB-C and three USB-A ports, letting you connect traditional USB devices now, while still being able to connect the growing number of USB Type-C devices in the future.

The integrated, easy-to-use USB Type-C connector is small and reversible, which makes for easier insertions. You can connect the plug with either side facing up, which means less risk of damaging your ports, and less frustration.

With a compact and lightweight design, the USB-powered hub is tailored for mobility. It easily tucks into your carrying case and expands your connectivity when traveling. It takes up minimal space on a desk, so you can use it in hot-desk or BYOD (Bring Your Own Device) environments.

Avoid the nuisance and cost of purchasing new peripherals by using this USB 3.0 hub with your current USB 3.0 and 2.0 devices. The bus-powered hub installs in seconds with no additional drivers or software required, and is compatible with virtually all operating systems.

The HB30C3A1CFB is backed by a 2-year warranty and free lifetime technical support.

• Cable length: 100mm
• Colour: Black
• Connector type(s): USB 3.0 A (9 pin, SuperSpeed) female, USB 3.1 USB Type-C (24 pin, gen 1, 5 Gbps) female, USB 3.1 USB Type-C (24 pin, gen 1, 5 Gbps) male
• Enclosure type: Plastic
• Form factor: Compact
• Interface type and rate: USB 3.1 gen 1, 5 Gbit/s
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Ports: 4
• USB-powered
• System and cable requirements: Available USB Type-C port - USB 3.1 gen 1 (5Gbps)
• USB-C device port(s): Yes
• USB-C host connection: Yes
• Product dimensions: 75 x 40 x 13mm
• Manufacturer's part no. HB30C3A1CFB

This 2-Port PCI to USB 3.0 Card from StarTech.com enables you to connect USB 3.0 peripherals to a PC through a legacy PCI host bus, which doubles the data transfer speeds when used with USB 3.0 peripherals than would be possible with a USB 2.0 host connection - up to 1.3 Gbps (PCI bus limit).

The card features an optional SATA power connection, enabling each port to supply up to 900mA of power to USB 3.0 bus-powered devices.

By supporting a legacy (PCI) host connection, the card adds updated peripheral connectivity, without having to upgrade to a PCIe-equipped motherboard or rely on the backward compatibility of USB 3.0 peripherals.

Guaranteed to provide reliable performance, the PCIUSB3S22 PCI USB 3.0 card is backed by lifetime warranty and free lifetime technical support.

• Bus type: PCI/PCI-X (5/3.3V)
• Card type: Standard profile (LP bracket included)
• Colour: Red
• Connector type(s): PCI/PCI-X (universal 3.3 and 5V, 32-bit) male
• External ports: USB 3.0 A (9 pin, SuperSpeed) female
• Interface type and rate: USB 3.0, 5 Gbit/s
• Internal ports: SATA power (15 pin) plug
• Maximum data transfer rate: 1.3 Gbps (PCI bus)
• OS compatibility: Windows® 10, 8/8.1, 7, Vista, XP
• Ports: USB 3.0 A (9 pin, SuperSpeed) female, SATA power (15 pin) plug, 2
• System and cable requirements: Available PCI slot, available SATA power connector
• UASP support: Yes
• Product dimensions: 123 x 56 x 10mm
• Manufacturer's part no. PCIUSB3S22

This 4-Port PCI to USB 3.0 Card from StarTech.com enables legacy PCI slots to support the SuperSpeed USB 3.0 standard, which is capable of data transfer rates up to 5 Gbps. Using USB 3.0 devices with this card will increase data transfer rates with up to 1.3 Gbps of available bandwidth (PCI bus limit) - more than doubling performance compared to a USB 2.0 connection.

This versatile USB 3.0 adaptor includes an optional SATA power connector which allows each USB port to deliver up to 900mA of power to connected USB 3.0 devices - suitable for even the most power hungry devices.

A perfect solution for older PCI-based systems or computers with only PCI expansion slots remaining, the card allows those systems to stay relevant and up-to-date with the latest USB technology. The card is also backward compatible with USB 2.0 and 1.x devices, so will not only work with any future USB 3.0 devices, but will also support older devices.

The PCIUSB3S4 4-Port PCI USB 3.0 Card is backed by a lifetime warranty and free lifetime technical support.

• Bus type: PCI/PCI-X (5 / 3.3V)
• Card type: Standard profile (LP bracket included)
• Colour: Red
• Connector type(s): PCI/PCI-X (universal 3.3 and 5V, 32-bit)
• External ports: USB 3.0 A (9 pin, SuperSpeed) female
• Interface type and rate: USB 3.0, 5 Gbit/s
• Internal ports: SATA power (15 pin) plug, SP4 (4 pin, small drive power) plug
• Maximum data transfer rate: 1.3 Gbps (PCI bus)
• OS compatibility: Windows® 10, 8/8.1, 7, Vista, XP
• Ports: USB 3.0 A (9 pin, SuperSpeed) female, SATA power (15 pin) plug, SP4 (4 pin, power) plug, 4
• System and cable requirements: Available PCI slot, available SATA or floppy power connector
• UASP support
• Product dimensions: 133 x 65 x 20mm
• Manufacturer's part no. PCIUSB3S4

This Startech.com 10-port USB 3.0 hub enhances your system's capabilities by providing fast-charging for mobile devices, plus quick access to your USB devices, making it perfect for business or home-office settings.

As a charging station, the hub features 2x 1.5 amp charge-and-sync ports, so you can easily fast-charge your smartphones, tablets and other mobile devices. Plus, you can still connect all of your vital peripherals to the remaining data ports. Because the hub supports USB Battery Charging Specification 1.2, you can charge most mobile devices, including Apple and Samsung Galaxy devices.

Designed for maximum scalability, this 10-port hub boosts your productivity by putting all of your USB devices within easy reach. With USB 3.0 transfer rates up to 5Gbps, it supports high-bandwidth devices such as external hard drive enclosures, flash drives, high-resolution webcams, video cameras, and more.

With its sleek and compact design, you can easily position the USB 3.0 (also known as USB 3.1 Gen 1) hub on your desk or workspace to make your USB devices more accessible. There's also ample space between the USB 3.0 ports, so it's easy to plug and unplug the devices you use the most. The USB 3.0 hub is natively supported in virtually all operating systems, which makes for an easy setup with no driver installation required.

Supplied with a USB cable and mains adapter. The ST103008U2C is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• Connector types: USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 A (Fast-Charge, 9 pin, SuperSpeed) female
• Enclosure type: Plastic
• Form factor: Desktop
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Ports: 10
• Colour: Black
• Power source: AC adaptor included
• Product dimensions: 201 x 60 x 24mm
• Manufacturer's part no.: ST103008U2C

This Startech.com 10-port USB 3.0 hub gives you the scalability you need in harsh industrial environments. It's designed to meet the advanced requirements of connecting a high number of devices in factory and industrial settings. With a metal housing, you can depend on this industrial hub even in tough operating conditions. And because it offers more ports than most USB 3.0 (also known as USB 3.1 Gen 1) hubs, you can access more devices at once, so you can work more efficiently and save time.

The hub supports USB Battery Charging Specification 1.2, delivering up to 1.5 amps power to each USB port, so you can charge your mobile devices faster than traditional USB ports allow.

This industrial USB hub delivers reliable performance in a heavy-duty metal housing. And because it supports 7 to 24V DC terminal block input, you have the flexibility to power the hub as required. Perfect for factory environments, the rugged hub supports an extended operating temperature range (0 to 70°C) and offers surge (350W) and ESD (15kV) protection to each USB port, which can help prevent damage to your connected devices.

With versatile installation options, you can install the hub where it's best suited for your environment. You can securely mount the USB 3.0 hub to a surface, wall, or under a desk, and, it includes optional DIN rail mounts for use with equipment rack installations.

The industrial hub supports the full 5Gbps bandwidth of USB 3.0 and is also backward compatible with previous USB devices. You can connect your legacy USB 2.0 and 1.x peripherals alongside your newer USB 3.0 devices without any disruptions.

Supplied with a USB cable, plug-in terminal block and DIN mounting clips. The ST1030USBM is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• Connector type(s): Terminal block (2 wire), USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female
• Enclosure type: Steel
• Form factor: Industrial
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Ports: 10
• Colour: Black
• Power source: Terminal block
• Product dimensions: 198 x 56 x 31mm
• Manufacturer's part no.: ST1030USBM

The ST4300U3C3 USB 3.0 Hub from StarTech.com enables simultaneous data hub and USB charging functionality by adding three dedicated USB charge ports, as well as four USB 3.0 data ports, for a total of seven ports, all through a single USB 3.0 host connection.

The USB hub ports are compliant with the SuperSpeed USB 3.0 specification, offering data transfer rates up to 5 Gbps, and are backward compatible with USB 2.0 and 1.x specifications.

This externally-powered USB hub also integrates 3x dedicated USB charging ports, providing 2 x 1A and 1 x 2A ports, enabling both data hub and USB charging station functionality. Support for USB Battery Charging Specification 1.2 lets you charge most mobile devices.

Designed for easy access to the ports when connecting or disconnecting devices, the hub features an upright port orientation, in a compact and durable metal enclosure. For added flexibility, the hub includes a bracket for wall-mounted installations.

It is backed by a 2-year warranty and free lifetime technical support.

• Colour: Black
• Connector type(s): USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female, USB A (4 pin) female
• Enclosure type: Aluminium
• Fast-Charge port(s): Yes
• Form factor: Desktop
• Interface type and rate: USB 3.0, 5 Gbit/s
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Plug type: M
• Ports: 7
• Power source: AC adaptor included
• System and cable requirements: Available USB 3.0 port
• Product dimensions: 110 x 45 x 24mm
• Manufacturer's part: ST4300U3C3

The Startech.com ST4300USB3GB 4-Port SuperSpeed USB 3.0 Hub allows you to add 4x additional USB 3.0 ports from a single USB 3.0 connection to the host computer system. Backward compatible with USB 2.0 and USB 1.x standards, this USB 3.0 hub still supports older USB devices and can also be used as a hub on older systems that do not have USB 3.0 ports.

With the capability to mix and match USB 3.0/2.0/1.x devices and be used with or without the included external power adaptor, this hub offers the best of versatility and portability. Connect high powered USB devices with the included external power adaptor, or simply use as a bus-powered hub.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

• Colour: Black
• Enclosure type: Plastic
• External ports: USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female x4
• Form factor: Desktop
• Interface: USB 3.0
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Plug type: Male
• Power source: AC adaptor included
• System and cable requirements: USB 3.0 or 2.0 or 1.x compliant host controller with available port.
• Product dimensions: 95 x 68 x 23mm
• Manufacturer's part no.: ST4300USB3GB

The Startech.com ST4300USBM 4-port Industrial USB USB 3.0 Hub offers a simple way to expand a system's current USB capability by providing 4x additional external USB 3.0 ports from a single USB 3.0 host connection, with speeds up to 5Gbps. Designed for extreme operating environments, this industrial-grade hub provides reliability under almost any condition and can be securely mounted to most surfaces. Fully compliant with the SuperSpeed USB 3.0 specification, this industrial USB hub is backward compatible with USB 2.0 and 1.x specifications for simultaneous support of older USB peripherals or even older systems without USB capabilities.

An all metal chassis, built-in surface mounting brackets and choice of power input method makes this versatile enough for almost any environment. Backed by a StarTech.com 2-year warranty and free lifetime technical support

• Colour: Black
• Enclosure type: Steel
• External ports: Terminal block (2 wire), USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female x4
• Form factor: Industrial
• Interface: USB 3.0
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Power source: AC adaptor included
• System and cable requirements: Available USB 3.0 port
• Product dimensions: 152 x 59.6 x 23.5mm
• Manufacturer's part no.: ST4300USBM

This compact 7-port USB 3.0 hub from StarTech.com is tailored to match the design of a MacBook. It features a sleek, silver sandblasted housing that looks great next to an Apple laptop. With a solid-aluminium casing, it provides the lightweight durability that's ideal for either travel or desktop usage.

This high-quality USB hub from StarTech.com gives you an easy way to expand MacBook connectivity. It provides seven USB 3.0 (also known as USB 3.1 Gen 1) hub ports in a compact housing. With more ports, you have more opportunity to connect extra USB devices. You can also leave devices plugged in, so they're ready to use when you need them.

The hub features a built-in 98cm cable which allows you to place the hub and your devices exactly where you want them, and ensures the hub can connect to your laptop or tablet regardless of where the laptop's USB 3.0 port is located.

This compact hub features seven ports with plenty of space between each port, unlike some USB 3.0 hubs that jam multiple ports into a tightly-packed space. With extra port spacing, you can connect devices and cables that have larger connectors, without sacrificing the hub's small footprint design.

The rugged aluminium housing offers dependable protection, so the hub is perfect for travel, such as back-and-forth trips from home to office. The hub takes up minimal space on a desk, so you can use it in hot-desk or BYOD (Bring Your Own Device) environments.

The easy-to-use hub is plug-and-play and hot-swap compatible, so you can install it quickly, with no additional drivers or software required. It includes a power adaptor, so you can connect virtually any USB 3.0 peripheral, even devices with high power requirements. You can also avoid the nuisance and cost of purchasing new devices by using the USB 3.0 hub with your current USB 2.0 and 1.x devices.

The ST73007UA is backed by a 2-year warranty and free lifetime technical support.

• Cable length: 980mm
• Colour: Silver and white
• Connector type(s): USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 A (9 pin, SuperSpeed) male
• Enclosure type: Aluminium and plastic
• Form factor: Desktop
• Interface type and rate: USB 3.0, 5 Gbit/s
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Plug type: H
• Ports: 7
• Power source: AC adaptor included
• System and cable requirements: Host computer with a USB 3.0 port
• Product dimensions: 183 x 37 x 18mm
• Manufacturer's part no. ST73007UA

This 7-port USB 3.0 hub from StarTech.com is a durable and compact hub that's perfect for a permanent set-up with a desktop computer, with a rugged metal housing that can withstand the wear and tear of daily use. You can attach it to a surface such as a desktop or wall using the included wall-mount bracket.

The ports on this hub are upright, which makes it perfect for IT professionals or anyone who needs to plug and unplug their USB devices regularly. You have lots of room to grip the connectors, without the worry of oversized plugs taking up too much space and reducing the number of available ports.

With extra USB 3.0 ports, you can increase productivity and connect more devices to your computer, or simply avoid the hassle of swapping connected devices on your port-limited laptop. The hub makes your USB ports more accessible and can easily extend the range of your devices by acting as a mid-point repeater.

The ST7300U3M supports the latest USB 3.0 products including UASP-enabled storage devices. With data transfer speeds of up to 5 Gb per second using SuperSpeed USB 3.0 technology, this high-performance hub is the perfect accessory for your desktop, laptop, MacBook®, or UltraBook™. You can also use the hub with older peripherals and computers, with support for USB 2.0 and 1.x devices and no additional drivers or software required for installation.

It is backed by a 2-year warranty and free lifetime technical support.

• Colour: Black
• Connector type(s): USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female
• Enclosure type: Aluminium
• Form factor: Desktop
• Interface type and rate: USB 3.0, 5 Gbit/s
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Plug type: M
• Ports: 7
• Power source: AC adaptor included
• System and cable requirements: Available USB 3.0 port
• Product dimensions: 110 x 44 x 24mm
• Manufacturer's part no. ST7300U3M

This USB 3.0 Hub from StarTech.com lets you add seven external USB 3.0 ports to a computer from a single USB 3.0 host connection.

Offering data transfer rates up to 5 Gbps, the USB hub meets SuperSpeed USB 3.0 specifications and is backward compatible with USB 2.0 and 1.x devices.

Designed for easy port access when connecting or disconnecting devices, the hub features one-sided port orientation, with current overload detection and protection across all seven ports. The hub supports Plug-and-Play and Hot-Swap technologies, letting you switch and operate your connected devices without having to power down the host computer.

The USB hub is bus powered for use in environments where a power outlet may be unavailable, but is perfect for high-power USB devices when used with the included optional power adaptor.

It is backed by a 2-year warranty and free lifetime technical support.

• Colour: Black
• Connector type(s): USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female
• Enclosure type: Plastic
• Form factor: Desktop
• Interface type and rate: USB 3.0, 5 Gbit/s
• Maximum data transfer rate: 5 Gbps
• OS compatibility: OS independent, no additional drivers or software required
• Plug type: M
• Ports: 7
• Power source: AC adaptor included
• System and cable requirements: Available USB 3.0 port
• Product dimensions: 172 x 70 x 23mm
• Manufacturer's part no. ST7300USB3B

The ST7320USBC 6-Port USB 3.0/2.0 Combo Hub from StarTech.com features a special high-output dedicated charging port which enables you to charge USB devices by providing up to 2A of power, or it can add 2x USB 3.0 and 4x USB 2.0 ports to a computer through a single USB 3.0 host connection.

The hub includes an external power adaptor, which when connected enables charging some portable electronic devices even without a USB connection to a host computer.

Offering a unique design that features USB ports along 3 sides of the hub, as well as a combination of USB 2.0 and 3.0 ports, this versatile and flexible USB hub is ideal for both laptop and desktop computers.

The ST7320USBC USB 3.0/2.0 hub is backed by a 2-year warranty and free lifetime technical support.

• Colour: Black
• Enclosure type: Plastic
• External ports: USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female, USB A (4 pin) female
• Fast-Charge port(s): Yes
• Form factor: Desktop
• Interface type and rate: USB 2.0, 480 Mbit/s; USB 3.0, 4.8 Gbit/s
• OS compatibility: OS independent
• Plug type: H
• Ports: USB 3.0 A (9 pin, SuperSpeed) female, USB 3.0 B (9 pin, SuperSpeed) female, USB A (4 pin) female, 7
• Power source: AC adaptor included
• System and cable requirements: Available USB 3.0 or 2.0 port
• Product dimensions: 99 x 60 x 20mm
• Manufacturer's part: ST7320USBC